New Datalogging & Acquisition
M5Stack AIN4-20mA Module 13.2 Quad-channel current analog acquisition module that adopts the STM32G030F6 central control chip and a dedicated acquisition chip. This module offers isolation to communicate with the M5 host for I2C communication. The AIN4-20mA module 13.2 supports externally powered wiring via jumper caps and internal switching. This module offers an Onboard power isolation chip, ensures signal accuracy and system safety, and built-in op amp circuitry accurately measures external current sensors. The AIN4-20mA module 13.2 regarding power supply, the DC-JACK interface, and the corresponding DC-DC boost circuit provide power to the entire device.
-
M5Stack AIN4-20mA Module 13.2Quad-channel current analog acquisition module that adopts the STM32G030F6 main control chip.9/21/2023
-
Advantech iDAQ Series DAQ ModulesSplits traditional functions in PCI/PCIe cards and USB modules into several functional units.7/13/2022 -
Advantech iDAQ-7 Series TTL Digital I/O ModulesFeatures 48-channels, detachable Euro-type spring terminal connectors and are hot-swappable.6/14/2022 -
Advantech iDAQ-8 Series Analog Output ModulesFeatures 4-channel, 16 bits resolution, and maximum update rates of 10kS/s/ch.6/14/2022 -
Advantech iDAQ-934 Industrial DAQ Chassis ModuleFeatures Physical ID switch for multiple module identification and LED status indicators.6/14/2022 -
Digilent MCC USB-1608G High-Speed Multifunction DAQ DevicesAn easy-to-use, easy-to-integrate, and easy-to-support data acquisition solution.5/23/2022 -
Digilent MCC USB-1608FS-Plus Simultaneous USB DAQ DeviceAn easy-to-use, easy-to-integrate, and easy-to-support data acquisition solution.5/23/2022 -
Digilent MCC USB-230 Multifunction USB DAQ DevicesA data acquisition solution that is easy-to-use, easy-to-integrate, and easy-to-support.5/23/2022 -
Digilent MCC USB-200 Single Gain Multifunction Devices12bit multifunction DAQ devices designed for general-purpose data acquisition applications.5/23/2022 -
Digilent MCC E-1608 Multifunction Ethernet DAQ DeviceAn easy-to-use, easy-to-integrate, and easy-to-support data acquisition solution.5/23/2022 -
Digilent MCC USB-1208HS-4AO High-Speed USB DAQ DeviceAn easy-to-use, easy-to-integrate, and easy-to-support data acquisition solution.5/20/2022 -
Digilent MCC USB-1808X Simultaneous USB DAQ DeviceAn easy-to-use, easy-to-integrate, and easy-to-support data acquisition solution.5/20/2022 -
Liquid Instruments Moku:Go Engineering Lab SolutionsA complete engineering lab solution for users to learn anything from circuits to senior design.11/15/2021 -
Digilent MCC DAQ HATs for Raspberry PiDesigned for the Raspberry Pi platform with analog and digital I/O in a small, stackable format.10/4/2021 -
Digilent MCC 172 IEPE Measurement DAQ HAT for Raspberry PiFeatures two channels for making sound and vibration measurements.10/4/2021 -
Pico Technology PicoLog 1000 Data LoggersDesigned to meet the needs of general-purpose voltage, sensor, and transducer logging applications.8/19/2021 -
Pico Technology TC-08 Thermocouple Data LoggerFeatures 8 direct thermocouple inputs to provide a cost-effective temperature measurement solution.8/19/2021 -
Fluke Electric Vehicle Charging StationsVariety of solutions that address the safety and reliability needs of EV charging stations.8/3/2021 -
DFRobot 8-Channel Isolated Analog Data Acquisition ModuleSingle-end 12-bit analog data acquisition module with an accuracy of up to ±1%.7/22/2021 -
Seeed Studio Sensor Hub Industrial-grade 4G Data Logger4G cellular station that uses the MODBUS-RTU RS485 protocol to communicate with sensors.5/27/2021 -
Seeed Studio SenseCAP Standard 4G Sensor HubEasy-to-deploy industrial-grade 4G cellular station that uses the MODBUS-RTU RS485 protocol.4/28/2021 -
BittWare RFX-8440 CardInnovative PCIe data acquisition card that addresses the entire sub-6GHz spectrum.4/6/2021 -
SpotSee gView Impact RecordersSimple solutions for monitoring and recording impacts during transportation and storage.11/10/2020 -
SpotSee SpotBot Cellular Impact & Temperature MonitorReduce the high cost of global supply chain damage.11/10/2020 -
SpotSee OpsWatch Impact & Vibration RecordersCan deliver real-time vibration and shock information to spot trends and detect fault indications.11/10/2020