Infineon Technologies PSoC™ 62S2 Wi-Fi® BLUETOOTH® Pioneer Kit
Infineon Technologies PSoC™ 62S2 Wi-Fi® BLUETOOTH® Pioneer Kit enables the evaluation and development of applications using the PSoC 62 Series MCU. This Infineon cost-effective hardware platform enables the design and debugging of the PSoC 62 MCU and the Murata 1LV Module (CYW43012 Wi-Fi + BLUETOOTH Combo Chip). The PSoC 6 MCU is Infineon Technologies' ultra-low-power PSoC specifically designed for wearables and IoT products. The PSoC 6 BLE Pioneer Board offers compatibility with Arduino™ shields. The board features a PSoC 6 MCU and a CYW43012 Wi-Fi/Bluetooth combo module. Infineon CYW43012 is a 28nm, ultra-low-power device that supports single-stream, dual-band IEEE 802.11n-compliant Wi-Fi MAC/baseband/radio and BLUETOOTH 5.0 BR/EDR/LE. Using the ModusToolbox™, users can develop and debug PSoC 6 MCU projects. ModusToolbox software is a set of tools that integrate Cypress devices into the existing development methodology.
Features
- CY8CMOD-062S2-43012 carrier module that contains
- PSoC 6 MCU (CY8C624ABZI-S2D44)
- Murata 1LV ultra-small 2.4GHz/5.0GHz WLAN and BLUETOOTH functionality module based on CYW43012
- 512-Mbit external Quad SPI NOR Flash that provides a fast, expandable memory for data and code
- 4-Mbit quad SPI ferroelectric random-access memory (F-RAM)
- KitProg3 onboard SWD programmer/debugger with USB-UART and USB-I2C bridge functionality
- CAPSENSE™ touch-sensing slider (5 elements), two buttons, based on self-capacitance (CSD) and mutual-capacitance (CSX) sensing
- A micro-B connector for the USB device interface for PSoC 6 MCU
- 1.8V and 3.3V operation of PSoC 6 MCU is supported
- Two user LEDs, an RGB LED, two user buttons, and a reset button for PSoC 6 MCU
- A potentiometer
- One mode-selection button and one status LED for KitProg3
- A MicroSD Cardholder
Kit Contents
- PSoC 62S2 Wi-Fi BT pioneer board
- USB Type-A to Micro-B cable
- Four jumper wires (4" each)
- Two jumper wires (5" each)
- Quick-start guide
Videos
Block Diagram
Related Development Tools
Infineon Technologies CY8CKIT PSoC™ 64 Secure Boot Wi-Fi® BT Pioneer Kit
A low-cost hardware platform to easily design and debug IoT applications.
Infineon Technologies IoT Sense Expansion Kit (CY8CKIT-028-SENSE)
Arduino™ UNO compatible shield designed to interface sensors with the PSoC™ 6 MCU platform.
Related Products
Infineon Technologies PSoC™ 6 Microcontrollers
High-performance PSoC™ MCUs with critical security features for Internet of Things applications.
Infineon Technologies EXCELON™ Ferroelectric-RAM (F-RAM)
Next-generation F-RAM that delivers low-power mission-critical nonvolatile memory.
Murata Type 1LV BLUETOOTH®+Wi-Fi® Module
Ultra-small, dual-band Wi-Fi® 802.11a/b/g/n and BLUETOOTH® 5 module based on Infineon CYW43012.
Published: 2020-04-06
| Updated: 2023-04-28