Espressif Systems ESP32-H2-MINI-1x BLE & IEEE 802.15.4 Modules
Espressif Systems ESP32-H2-MINI-1x BLE and IEEE 802.15.4 Modules are powerful, generic BLUETOOTH® Low Energy and IEEE 802.15.4 combo modules featuring a rich set of peripherals. The ESP32-H is suitable for building IoT applications with high requirements for power consumption.
The Espressif Systems ESP32-H2-MINI-1x Module is based on the ESP32-H2 System-on-Chip (SoC), a 32-bit RISC-V single-core CPU that operates at up to 96MHz. The CPU of the ESP32-H2 can be powered off to make use of the low-power coprocessor to constantly monitor the peripherals for changes or crossing of thresholds. The ESP32-H2 integrates I2C, I2S, SPI, UART, ADC, LED PWM, ETM, GDMA, PCNT, PARLIO, RMT, TWAI, MCPWM, USB Serial/JTAG, temperature sensor, general-purpose timers, system timer, and a watchdog timer as well as up to 19 GPIOs.
The compact ESP32-H2-MINI-1x module is pin-to-pin compatible with the ESP32-C3-MINI and ESP32-C6-MINI modules. The ESP32-H2-MINI-1x can be used for building Thread end devices, as well as Thread border routers and Matter bridges by combining it and an ESP Wi-Fi® SoC.
Features
- 3.0V to 3.6V operating voltage
- CPU and On-Chip Memory
- ESP32-H2 embedded, RISC-V single-core 32-bit LX7 microprocessor, up to 96MHz
- 128KB ROM
- 320KB SRAM
- 4KB LP Memory
- 2MB or 4MB in-package flash
- Bluetooth
- Bluetooth Low Energy (Bluetooth 3 certified)
- Bluetooth mesh
- Bluetooth Low Energy long-range (Coded PHY, 125 Kbps and 500 Kbps)
- Bluetooth Low Energy high speed (2 Mbps)
- Bluetooth Low Energy advertising extensions and multiple advertising sets
- Simultaneous Broadcaster, Observer, Peripheral and Central
- Multiple connections
- LE power control
- IEEE 802.15.4
- IEEE Standard 802.15.4-2015 compliant
- Supports 250 Kbps data rate in 4 GHz band and OQPSK PHY
- Supports Thread 3
- Supports Zigbee 3.0
- Supports Matter
- Supports other application-layer protocols (HomeKit, MQTT, etc)
- Peripherals
- GPIO, I2C, I2S, SPI, UART, ADC, LED PWM, ETM, GDMA, PCNT, PARLIO, RMT, TWAI®, MCPWM, USB Serial/JTAG, temperature sensor, general-purpose timers, system timer, watchdog timer
- Integrated Components on Module
- 32MHz crystal oscillator
- Antenna Options
- On-board PCB antenna (ESP32-H2-MINI-1)
- External antenna via a connector (ESP32-H2-MINI-1U)
- 13.2mm × 16.6mm × 2.4mm dimensions
Applications
- Smart Home
- Industrial Automation
- Health Care
- Consumer Electronics
- Smart Agriculture
- Retail and Catering
- Generic Low-power IoT Sensor Hubs
- Generic Low-power IoT Data Loggers
Videos
Development Tools
Espressif Systems ESP32-H2-DevKitM-1 Development Kit
Entry-level development board utilizing the BLE and IEEE 802.15.4 combo modules ESP32-H2-MINI-1.
Block Diagram
