New Power Management Modules
M5Stack M039-V1.1 Stepmotor Driver Module is adapted to M5 main control, using STM32+HR8825 stepper motor drive scheme. This module provides a 3-way bipolar stepper motor control interface. The ESP32 internal signal of the main control connects to the driver chip that realizes the multi-axis motor linkage or independent control. This M039-V1.1 module integrates the STM32F030F4P6 chip as IO expansion, 1 set of driver chips enable control, and provides four sets of input signal terminals. The M039-V1.1 module contains three pads to control the subdivision mode of 3 sets of stepper motors and realize the subdivision adjustment of stepper motors.
-
M5Stack M039-V1.1 Stepmotor Driver ModuleAdapted to M5 main control, using STM32+HR8825 stepper motor drive scheme.9/22/2023
-
M5Stack Hbridge Unit Power Management ModuleUnit DC motor drive module uses the STM32F030+RZ7899 scheme to realize the motor drive function.9/21/2023 -
TDK Z63000 MediPlas DriverDesigned to be used as an HV driver for DBD loads.9/14/2023 -
Texas Instruments TPSM83100 & TPSM83101 Buck-Boost ModulesDevice integrates an inductor to simplify design, reduce external components, and save PCB area.8/31/2023 -
Vishay HV Intelligent Battery Shunt HV-IBSS-USBEvaluates the low TCR shunt WSBE8518 and uses a single USB-C connector to power the circuit.7/17/2023 -
Wolfspeed CRD25DA12N-FMC 25kW Three-Phase InverterA complete, easy-to-use, flexible power stage designed around CCB021M12FM3 WolfPACK™ power module.6/20/2023 -
Texas Instruments TPSM82913 Synchronous Buck Converter Module17VIN, 3A low-noise and low-ripple buck module with integrated ferrite bead filter compensation.3/15/2023 -
Monolithic Power Systems (MPS) MPM3814C Step-Down Power Modules1A of continuous output current from a 2.75V to 6V input voltage range with load regulation.8/26/2022 -
Texas Instruments TPSM63603 Synchronous Buck Power ModuleAn integrated 36V, 3A DC/DC solution combines power MOSFETs, a shielded inductor, and passives.6/6/2022 -
Texas Instruments TPSM63602 Synchronous Buck Power ModuleAn integrated 36V, 2A DC/DC solution combines power MOSFETs, a shielded inductor, and passives.6/6/2022 -
Monolithic Power Systems (MPS) MPM3824C Ultra-Small Power ModulesUp to 2A of continuous output current from a 2.75V to 6V input voltage range with load regulation.4/11/2022 -
DFRobot USB Step-up Boost ConverterUSB (input) to DC (output) boost converter that can step up 5V to 9V/12V with a switch.3/29/2022 -
DFRobot Industrial Isolated DC-DC Buck Converter50W high-power step-down module offering 9V to 18V input voltage range and a max output of 5V/10A.3/28/2022 -
onsemi FAN251015GEVB Evaluation BoardDemonstration and development platform for the FAN251015 15A Synchronous Buck Regulator.2/21/2022 -
Monolithic Power Systems (MPS) MPM3690-30A & MPM3690-30B DC-DC Power ModulesPin-compatible dual 18A and single 36A output power modules featuring MCOT control.12/29/2021 -
Texas Instruments UCC25800EVM-037 LCC Converter Evaluation ModuleThis module is an isolated open-loop LLC transformer driver converter based on the UCC25800.12/27/2021 -
Monolithic Power Systems (MPS) MPM54504 Quad DC-DC Power ModuleA 16V module with a 5A output array and a wide 3V to 16V input voltage range in a BGA package.12/2/2021 -
Crowd Supply D-MARK Stepper Motor Driver ModuleSlots into the D-MARK Controller Board and can drive 4- to 8-wire step motors up to 2A.9/20/2021 -
Monolithic Power Systems (MPS) MPM82504 Power Management ModulesWith PMBUs interface offers a complete power solution that achieves up to 25A output channel.8/26/2021 -
DFRobot DRF08x Fast Charge Buck ModulesIntegrate the common 5V charging recognition function that is compatible with 99% of mobile phones.8/3/2021 -
Silvertel Ag105 Miniature Lithium-ion Charge ControllerFor protected Li-ion/Li-Po batteries or for use with a fixed DC supply in standalone applications.7/1/2021 -
Tinkerforge Silent Stepper Bricklet 2.0One bipolar stepper motor with a 1.6A(max) and a 46Vmax per phase can be controlled.5/4/2021 -
Tinkerforge DC Bricklet 2.0The direction, velocity, and acceleration of the connected motor can be controlled using API.5/4/2021 -
DFRobot DFR0831 DC-DC Buck ConverterA 20W power module that operates from 7V to 24V input voltage range and 5V output voltage.4/29/2021 -
Lambda Nu PowerEverA tiny PCB that turns any commercial USB power bank into a non-stop power supply.4/15/2021