New Motors & Drives
Analog Devices PD60-4H-1461-CoE Single Axis Stepper Motor is intended as a servo drive for up to +48V supply voltage and up to 3Nm torque. The PD60-4H-1461-CoE offers a built-in magnetic encoder used for the closed-loop operation of the motor. The module communicates via the CANopen over EtherCAT® protocol. The ADI PD60-4H-1461-CoE includes housing and can be interfaced with M8-type connectors.
-
Analog Devices Inc. PD60-4H-1461-CoE Single Axis Stepper MotorA servo drive for up to +48V supply voltage and up to 3Nm torque.9/12/2023
-
IDEC Doesa VF1A Compact AC DrivesHigh-performance three-phase 380VAC to 480VAC AC drives with enhanced functionality.11/9/2022 -
MinebeaMitsumi DIX36 Geared MotorOperates based on the interaction between the rotor and the stator.10/21/2022 -
Schneider Electric Altivar ATS480 Soft StartersSecure soft starters with a 208V to 690V voltage range and amperage ratings up to 1200A.10/7/2022 -
MinebeaMitsumi MAP DC Brush Motors With Micro Air PumpFeatures simplified pump structure.9/12/2022 -
MinebeaMitsumi DC Brush Motors With GearboxAdded to each of the brush motor series to achieve the desired speed or torque requirements.9/12/2022 -
MinebeaMitsumi Standard Round Brush DC MotorsAvailable with outer diameters from 24mm to 38.8mm.9/12/2022 -
MinebeaMitsumi Compact Outer Rotor BLDC MotorsFeatures high performance in a compact package.9/12/2022 -
Orion Fans OAM Series Open Frame Motors500VAC dielectric strength rating, ≥10MΩ insulation resistance, & -30°C to +60°C temperature range.8/3/2022 -
Texas Instruments DRV8316/DRV8316-Q1 Three-Phase FET Motor DriverA single-chip power stage solution designed for driving 12V brushless-DC motors up to 40W.7/11/2022 -
Mikroe 430RPM (3V to 6V) DC Gear MotorA brushed DC motor with a spur gearbox and a 3V to 6V operational voltage range.5/26/2022 -
Texas Instruments DRV8251 4.1A Brushed DC Motor DriverMotor driver with N-channel H-bridge, charge pump, current regulation, and protection circuitry.3/17/2022 -
Texas Instruments DRV8231 33V H-Bridge DriverN-channel H-bridge, charge pump, current sense feedback, current regulation & protection circuitry.1/28/2022 -
Vertiq 8108 150Kv ControllerIntegrated motor and controller with a wide range of velocity-based applications.1/13/2022 -
Phoenix Contact CONTACTRON Speed Starter Motor/Frequency DrivesOffers the ability to control motor ramp-up/-downtimes while operating under torque.1/11/2022 -
Texas Instruments DRV8251A H-Bridge DriverHighly integrated with an N-channel H-bridge, charge pump, and protection circuitry.12/17/2021 -
Schneider Electric GP2E Easy TeSys™ Thermal Magnetic Circuit Breakers3-pole motor controllers/circuit breakers that control and protect motors up to 32A (20HP/480VAC).8/2/2021 -
DFRobot FIT0774 Mini Vibration MotorFeatures a strong vibration, low noise, easy to embed, and long lifespan.7/29/2021 -
Overview Leto Integrated Servo MotorsDesigned for applications requiring exceptional positional accuracy and repeatability.4/12/2021 -
Overview Miranda™ Servotorq™ Integrated Servo MotorsDeliver a peak torque of 1.0Nm.4/9/2021 -
Overview Titan Integrated Servo MotorsDesigned for high positional accuracy, smooth and silent motion.4/9/2021 -
Overview Atlas BLDC Integrated Servo MotorsDesigned for high positional accuracy, smooth and silent motion.4/9/2021 -
DFRobot FIT0708 18° Micro Stepper Motor10mm, 2-phase 4-wire stepper motor that works directly with main-controllers like Arduino and ESP32.4/7/2021 -
Analog Devices Inc. MAX2220x 36V/3.5A Brushed Motor DriversFeatures low impedance FETs with a typical 0.3Ω RON that results in high driving efficiency.3/22/2021 -
Schneider Electric Altivar™ ATV212 Variable Speed DrivesReliable and energy-efficient solution specifically designed for HVAC applications in buildings.3/1/2021