Segger Microcontroller



Hardware Debuggers J-Link PLUS Compact

In Stock: 67


Can Ship Immediately

On Order:

Expected 21-Nov-23

Factory Lead-Time:

Weeks Estimated factory production time for quantities greater than shown.
Minimum: 1   Multiples: 1


Pricing (USD)

Qty. Unit Price
Ext. Price
$748.00 $748.00
Product Attribute Attribute Value
Segger Microcontroller
Product Category: Hardware Debuggers
RoHS:  Details
JTAG/SWD Debuggers / Programmers
ARM7/ARM9/ARM11, ARM Cortex A5/A7/A8/A9/A12/A15/A17, ARM Cortex M0/M1/M3/M4/M7/M23/M33, ARM Cortex R4/R5, EFM8, Fusion F1, HiFi1/3/3z/4, Fusion F1, PIC32MX/32MZ, RV32/64, RX110/111/140/210/21A/220/610/621/62G/62N/62T/630/631/63N/63T/660 MCUs
8051, ARM7/ARM9/ARM11, ARM Cortex A5/A7/A8/A9/A12/A15/A17, ARM Cortex M0/M1/M3/M4/M7/M23/M33, ARM Cortex R4/R5, PIC32, RISC-V
Brand: Segger Microcontroller
For Use With: -
Interface Type: JTAG, SWD, USB
Operating Supply Voltage: 1.2 V to 5 V
Product Type: Debuggers
Factory Pack Quantity: 1
Subcategory: Development Tools
Unit Weight: 5.623551 oz


J-Link In-Circuit Debuggers

SEGGER Microcontroller J-Link In-Circuit Debuggers are USB-powered JTAG emulators based on a 32-bit RISC CPU. These Debuggers can communicate at high speed with a large number of supported target CPU cores. The J-Link debuggers support multiple target interfaces that include JTAG, SWD, FINE, SPD, and ICSP. These debug probes support ARM7/9/11, Cortex- M/R/A, Microchip PIC32, and Renesas RX CPUs and also supports SPI flash devices. The J-Link Debuggers variant includes J-Link Base, J-Link Base Compact, J-Link Plus, J-Link Plus Compact, J-Link EDU, and J-Link EDU Mini.

J-Link PLUS & J-Link PLUS Compact Debug Probes

SEGGER Microcontroller J-Link PLUS and J-Link PLUS Compact Debug Probes are USB-powered JTAG devices that support many CPU cores. These debug probes are based on 32-bit RISC CPUs and can communicate quickly with the supported target CPUs. The J-Link PLUS debug probes are available in J-Link PLUS (100mm x 53mm x 27mm) and J-Link PLUS Compact (47mm x 40mm x 14mm) form factors. These debug probes are supported by all major IDEs, including Eclipse, GDB-based IDEs, and SEGGER Embedded studio. The J-Link debug probes are used for development and production (flash programming).

Image Description
MultiTech CA-USB-A-MINI-B-3
USB Cables / IEEE 1394 Cables USB Cable Type A to Type B Mini (24 AWG, 3 ft)
Segger Microcontroller 8.06.02
Sockets & Adapters J-LINK 9-PIN CORTEX-M ADAPTER
Segger Microcontroller 8.06.00
Sockets & Adapters J-LINK 19-PIN CORTEX-M ADAPTER
Segger Microcontroller 8.19.00
Hardware Debuggers J-Link BASE Compact
Segger Microcontroller 8.06.04
Sockets & Adapters J-Link Needle Adapter 20/10
Segger Microcontroller 8.06.16
Sockets & Adapters J-Link 6-pin Needle Adapter
Segger Microcontroller 8.07.01
Sockets & Adapters SWD Isolator
Olimex Ltd. ARM-JTAG-20-10
Sockets & Adapters JTAG 20 PIN 0.1" TO 10 PIN 0.05" ADAPTER
Adafruit 2094
Adafruit Accessories JTAG (2x10 2.54mm) to SWD (2x5 1.27mm) Cable Adapter Board
Microchip PG164140
Hardware Debuggers PICKit 4 MPLAB