Wurth WE-PD Shielded Power Inductors Design Kits
Wurth Electronics WE-PD Shielded Power Inductors Design Kits provide a range of SMD shielded inductors for convenient fingertip access from the lab workbench.
744777 - contains 1225 parts, 5 each of 34 inductors, WE-PD Series in case sizes 7345/1260
744778 - contains 3500 parts, 10 each of 35 inductors, WE-PD Series in case sizes 6033/7332
744770 - contains 1225 parts, 5 each of 35 inductors, WE-PD in case sizes 1280/1210
See WE-PD Power Inductors
Wurth Electronics WE-CMS Common Mode SMD Bead
The Wurth Electronics WE-CMS Common Mode SMD Bead provides EMI/RFI Suppression with 211 Ohms impedance with 25% tolerance. This ferrite bead offers a max. DC current of 5 Amps and max. DC resistance of 3 mOhms. The Wurth Electronics WE-CMS Common Mode SMD Bead is ideal for power supply systems, symmetric data lines, common mode interference, and power electronics.
Wurth Electronics WE-TI XS Radial Leaded Wire Wound Inductors
Wurth Electronics WE-TI XS Radial Leaded Wire Wound Inductors are through-hole inductors with a high saturation core material. Although small in size, it offers a maximum current up to 8.5 A. The Wurth Electronics WE-TI XS Radial Leaded Wire Wound Inductors are ideal for signal filtering, switches, switching power supply for small and medium voltage, as a power supply filter, and for EMI filtering.
Wurth Electronics WE-PD SMD Shielded Power Inductors
Wurth Electronics WE-PD SMD Shielded Power Inductors are magnetically shielded for a low leakage field and low self-losses. With a high storage capacity, the Wurth WE-PD Inductors feature the highest possible current loading for SMD inductors. The Wurth Electronics WE-PD SMD Shielded Power Inductors operate between -40ºC and +125ºC and a reflow solder is recommended. Because of the one-piece construction, the WE-PD Inductors are suitable for high vibration or shock applications. Also ideal for switching regulators with low operating voltages, such as computers, laptops, mobile phones, and pagers, as well as integrated DC/DC converters, switching regulators with extremely high efficiency (>85%), and graphic cards.
See WE-PD Design Kits
Wurth Electronics WE-CNSW High Frequency Common Mode Line Filters
Wurth Electronics WE-CNSW High Frequency Common Mode Line Filters are SMD inductors offering high common mode suppression at high frequencies. Available in 0603 and 0805 case sizes, the WE-CNSW filters have small influence on high speed signals through winding symmetry and operate within a temperature range of -40ºC to +105ºC (+125ºC for 0805). Applications for the Wurth Electronics WE-CNSW High Frequency Common Mode Line Filters are USB 2.0, USB 3.0, HDMI, LVDS, high speed data lines, IEEE 1394, LAN, and common mode noise sources.
Wurth Electronics WE-PDF SMD Shielded Power Inductors
Wurth Electronics WE-PDF SMD Shielded Power Inductors are suitable
for high frequency switching regulators. With magnetic shielding, the flat-wire coil WE-PDF series offers a low leakage field and lower losses at high frequency ranges. Available in 1064 case size (0.40 x 0.40 x 0.25 x 0.12 x 0.27"), the Wurth Electronics WE-PDF SMD Shielded Power Inductors operate within an advanced temperature range of -40ºC to +150ºC.
Wurth Electronics WE-PMI High Current Multilayer Power Inductors
Wurth Electronics WE-PMI High Current Multilayer Power Inductors are SMD inductors suitable for applications for high currents up to 2.5A, such as DC/DC converters (especially at high switching frequencies) and portable devices such as PDAs and digital cameras. With magnetically shielded construction, the WE-PMI series has no crosstalk. Available in 1008 case size (0.10 x 0.08 x 0.04 x 0.02"), the Wurth Electronics WE-PMI High Current Multilayer Power Inductors operate within a temperature range of -40ºC to +125ºC.
Wurth Electronics WR-COM USB 3.0 Horizontal Connectors
The Wurth Electronics WR-COM USB 3.0 Horizontal Connectors are available in Type A, Type B, Micro-B, THT, SMD, and dual configurations. All WR-COM USB 3.0 connectors can be wave soldered and reflow soldered. Reflow qualified connectors can be identified by the blue plastic used in construction.
View USB 3.0 Cable Assemblies
Wurth Electronics WE-RJ45 LAN Transformer, USB 3.0
The Wurth Electronics WE-RJ45 LAN Transformer, USB 3.0 is an RJ45 connector with an integrated transformer, USB 3.0 ports, and LEDs. The WE-RJ45 features an extended temperature range of -40ºC to 85ºC and are 10/100/1000 Base-T compatible. Applications for the Wurth Electronics WE-RJ45 LAN Transformer, USB 3.0 are Ethernet, 1 Gigabit Ethernet, Embedded PCs, Hubs, Routers, Switches, and USB 3.0.
View Wurth USB 3.0 Cable Assemblies
Wurth HCI SMD Flat Wire Inductors
The HCI SMD Flat Wire Inductors by Wurth Electronics are magnetically shielded and have a flat wire coil for low losses at high frequency. Wurth Electronics' HCI SMD Flat Wire Inductors have a low stray field, operating temperature of -40ºC to +125ºC/+150ºC, and a reflow solder recommended profile. They are ideal for use with laptops, graphic cards, motherboards, DC/DC converters, industrial computers, and more.
Wurth Electronics HCC SMD High Current Cube Inductors
The HCC SMD High Current Cube Inductors from Wurth Electronics are magnetically shielded, have an operating temperature of -40ºC to +125ºC, a reflow recommended solder profile, current capability up to 27A and excellent saturation characteristics. Wurth Electronics' HCC SMD High Current Cube Inductors serve as filter chokes for DC/DC converters and motor electronics, as well as single and polyphase back converters.
Wurth KI SMD Wire Sound Ceramic Inductors
The KI SMD Wire Sound Ceramic Inductors from Wurth Electronics have an excellent Q factor and the highest possible self resonant frequencies up to 12.5 GHz. Wurth Electronics' KI SMD Wire Sound Ceramic Inductors have inductance tolerances of 5% (2% on request), high thermal stability, and an operating temperature of -40ºC to +125ºC. This series was created for use with high frequency applications.
Wurth Electronics Design Kit SMD Common Mode Chokes
Wurth Electronics offers an SMD-Common Mode Choke Design Kit with 7 different types, 35 values, and 425 components for 2, 3, or 4 line configurations. The Common Mode Choke Design Kit includes low profile, high current up to 2.7A, and high impedance up to 20kΩ components for use with USB, CAN, Firewire, data lines, and power line applications.