WIZnet is a private fabless semiconductor company founded in 1998 in Korea. WIZnet's main product is an Internet Processor, iMCU™, which is specialized by TOE (TCP/IP Offload Engine) technology based on a unique patented fully hardwired TCP/IP. The iMCU™ market is Embedded Internet Devices in a wide variety of applications, which is also segmented locally and regionally.
WIZnet WizFi630 802.11 b/g/n Wi-Fi Gateway Module transforms the RS-232 protocol and TCP/IP protocol into IEEE 802.11 b/g/n wireless LAN protocol. The module enables a device with RS-232 serial interface to connect to LAN or WLAN for remote control, measuring, and administration. WizFi630 can also work as an IP router thanks to its internally embedded switch. This Wi-Fi module follows the 802.11b/g/n standard, supports up to 150Mbps speed in wireless interface, and provides a test board, pc software, and documents so that anyone can develop a wireless solution. The WizFi630 can significantly reduce the processes for wireless module design, testing, and certification, making it an excellent solution for users who lack wireless network experience. An evaluation board, the WizFi630-EVB, is also available for the WizFi630.
WIZnet ARM Cortex M3 Internet Embedded MCU (iMCU) W7200 is a one-chip solution that integrates an ARM 32-bit Cortex-M3 core from STmicro, 20KB SRAM, and a hardwired TCP/IP core for high performance and easy development. The TCP/IP core is a market-proven hardwired TCP/IP stack with an integrated Ethernet MAC & PHY. The Hardwired TCP/IP stack supports the TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE which has been used in various applications for years. Also available is the W7200-EVB Evaluation Board for testing the iMCU W7200 and for prototyping development. W7200-EVB is composed of a W7200 based on the ARM Cortex M3, which acts as a hardwired TCP/IP embedded Ethernet controller, and a FT232R which acts as USB-to-UART interface IC.
WIZnet WIZ108SR RS422/485-to-Ethernet Module is a gateway module between an RS-422/485 device and Ethernet which provides a quick and easy-to-use interface that shortens the development period. WIZnet WIZ108SR RS422/485-to-Ethernet Module features compact size, guaranteed stable and reliable data communication, and a user friendly configuration program. The module provides 10/100Mbps Ethernet and a maximum of 230Kbps RS-422/485 interface, and supports PPPoE protocol, serial, and IP configuration.
WIZnet W5300 Hardwired Network Protocol Embedded Ethernet Controller is a 0.18μm CMOS technology single chip integrating a 10/100 Ethernet controller, MAC, and TCP/IP. W5300 is designed for Internet embedded applications where easy implementation, stability, high performance, and effective cost are required. WIZnet W5300 Hardwired Network Protocol Embedded Ethernet Controller supports communication protocols such as TCP, UDP, IPv4, ICMP, IGMP, ARP and PPPoE. In order to provide high-performing data communication, the W5300's memory is extended to 128kb and the module supports a 16bit bus interface. Users can utilize 8 independent hardware sockets for high-speed data communication.
WIZnet iEthernet W5200 Fast SPI Ethernet Controller is a hardwired TCP/IP embedded Ethernet controller that enables easier internet connection for embedded systems using SPI (Serial Peripheral Interface). The W5200 is best suited for users who need internet connectivity for applications that use a single chip to implement TCP/IP stack and 10/100 Ethernet MAC and PHY. WIZnet iEthernet W5200 Fast SPI Ethernet Controller is composed of a fully hardwired, market-proven TCP/IP stack and an integrated Ethernet MAC and PHY. The hardwired TCP/IP stack supports TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE. The W5200 supports a high speed SPI capable of communicating at up to 80MHz. This chip also offers WOL (Wake on LAN) and power down mode to reduce power consumption of the system.
WIZnet W5100 Hardwired TCP/IP Embedded Ethernet Controller is a full-featured, single-chip Internet-enabled 10/100 Ethernet controller designed for embedded applications where ease of integration, stability, performance, area, and system cost control are required. The W5100 has been designed to facilitate easy implementation of Internet connectivity without an OS, and it is IEEE 802.3 10BASE-T and 802.3u 100BASE-TX compliant. WIZnet W5100 Hardwired TCP/IP Embedded Ethernet Controller includes a fully hardwired, market-proven TCP/IP stack and integrated Ethernet MAC and PHY. The hardwired TCP/IP stack supports TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE, and 16Kb internal buffer is included for data transmission. For easy integration, three different interfaces--direct, indirect bus, and SPI--are supported on the MCU side.