Home | Amplifiers & Linear | Data Converters | High-Reliability | Interface
Logic | Power Management | Processors | Wireless Connectivity | Development Tools
Texas Instruments offers cost-effective, low-power solutions for short range, long range, mesh and IP networks, personal area networks, locationing, as well as mobile handset connectivity and ISM band. TI's wireless connectivity technologies include Bluetooth® technology, Bluetooth low energy technology, ANT™, ZigBee®, IEEE 802.15.4, RFID, and GPS, as well as a wide selection of RF ICs and proprietary protocols for the sub-1 GHz and 2.4 GHz frequency bands.
Texas Instruments RF and Wireless Connectivity Products
2.4GHz and up
Texas Instruments RF430CL330H Dynamic NFC Interface Transponder is an NFC Tag Type 4 device that combines a wireless NFC interface and a wired SPI or I2C interface to connect the device to a host. The NDEF message in the SRAM can be written and read from the integrated SPI or I2C serial communication interface and can also be accessed and updated wirelessly via the integrated ISO14443B-compliant RF interface that supports up to 848kbps. This allows NFC connection handover for an alternative carrier like Low Energy (BLE) and Wi-Fi as an easy and intuitive pairing process or authentication process with only a tap. As a general NFC interface, TI RF430CL330H enables end equipment to communicate with the fast-growing infrastructure of NFC-enabled smart phones, tablets, and notebooks. A target board is available to evaluate the features of RF430CL330H.
Texas Instruments CC1200 sub-1GHz is a fully integrated single-chip radio transceiver designed for high performance at very low power and low voltage operation in cost effective wireless systems. All filters are integrated, removing the need for costly external SAW and IF filters. This TI device is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 164-190MHz, 410-475MHz, and 820-950MHz. Evaluation module kits and a development kit are available for easy assessment of this TI RF transceiver.
Texas Instruments bq500211A and bq500410A bqTESLA™ Wireless Power Transmitter Evaluation Modules are high-performance, easy-to-use development modules for the design of wireless power solutions. TI bq500211AEVM-210 supports bq500211A transmitter. The single-channel transmitter enables designers to speed the development of their end-applications. The bq500211A EVM evaluation module (EVM) provides all basic functions of a Qi-compliant, wireless charger pad. The evaluation module is intended to be used with bq51013AEVM-764, -765, or any other Qi-compliant receiver. 085 is a 12V input design with an optional boost converter for operation from 5V. TI bq500410AEVM-085 provides all major functions for evaluation of bq500410A IC in a fully functional WPC A6 type wireless transmitter. bq500410A supports up to three co-located coils for increased free positioning area. Any Qi-compliant receiver or bq51013AEVM-764, -765 receiver evaluation modules can be used for evaluation.
Texas Instruments CC2541 2.4-GHz Bluetooth® System-on-Chip (SoC) is a power-optimized true SoC solution for both Bluetooth low energy and proprietary 2.4-GHz applications. TI CC2541 enables robust network nodes to be built with low total bill-of-material costs. CC2541 combines the excellent performance of a leading RF transceiver with an industry-standard enhanced 8051 MCU, in-system programmable flash memory, 8KB RAM, and many other powerful supporting features and peripherals. CC2541 is highly suited for systems where ultralow power consumption is required. This device is specified by various operating modes. Short transition times between operating modes further enable low power consumption.
Texas Instruments CC2560 Bluetooth Smart Ready Controller is a complete BR/EDR/LE HCI solution that reduces design effort and enables fast time to market. Based on TI's seventh-generation core, this device brings a product-proven solution that supports 4.0 dual mode (BR/EDR/LE) protocols. TI’s power-management hardware and software algorithms provide significant power savings in all commonly used BR/EDR/LE modes of operation. When coupled with an MCU device, this HCI device provides best-in-class RF performance for mobile phone accessories, sports and fitness applications, wireless audio solutions, remote controls, and toys.
With transmit power and receive sensitivity, TI CC2560 provides a best-in-class range of about 2x, compared to other BLE-only solutions. A royalty-free software stack available from TI is pre-integrated with TI's MSP430 and Stellaris MCUs.
Texas Instruments CC11xL devices are transceivers, receivers, and transmitters designed for ultralow-power wireless applications operating in the 315/433/868/915 MHz ISM/SRD bands as well as wireless alarm and security systems. TI CC110L Value Line Transceivers, CC113L Value Line Receivers, and CC115L Value Line Transceivers are cost-optimized sub-1 GHz RF devices based on the popular CC1101 RF transceiver, and RF performance characteristics are identical. TI CC110L RF transceivers are integrated with a highly configurable baseband modem. The modem supports various modulation formats and has a configurable data rate up to 600kbps. TI CC113L RF receivers are integrated with a highly configurable baseband demodulator. The modem supports various modulation formats and has a configurable data rate up to 600 kbps. TI CC115L RF transmitters are integrated with a highly configurable baseband modulator. The modem supports various modulation formats and has configurable data rates from 0.6 to 600knps. The CC110L, CC113L, and CC115L provide extensive hardware support for packet handling, data buffering, and burst transmissions.
Texas Instruments CC3000TIWISLEM SimpleLink™ CC3000 Wi-Fi Evaluation Module is a self-contained wireless solution that simplifies the process of implementing Internet connectivity. This TI SimpleLink Wi-Fi eval module minimizes host microcontroller (MCU) software requirements, making it the ideal solution for embedded applications using any low-cost/low-power MCU. This TI kit provides an EM board with LSR TiWi-SL SimpleLink Wi-Fi module on it. The EM board has standard RF1 and RF2 headers that connect to many TI platforms, including some kits for MSP430 MCUs, Stellaris MCUs, and C5000 digital signal processors. The SimpleLink CC3000 Wi-Fi solution is provided as a module to reduce development time, lower manufacturing costs, save board space, ease certification, and minimize RF expertise required. It is provided as a complete platform solution including software drivers, sample applications, API guide, user documentation and a world-class support community.
Texas Instruments 430BOOST-CC110L RF BoosterPack is a low-power wireless transceiver extension kit for use with the TI MSP-EXP430G2 LaunchPad development kit. The TI 430BOOST-CC110L RF BoosterPack wireless transceiver extension kit features an on-board Anaren A110LR09A radio module with integrated antenna. The radio module is based on the TI CC110L RF transceiver and is designed to operate in the European 868-870MHz and US 902-928MHz ISM bands. The TI 430BOOST-CC110L RF BoosterPack includes the AIR BoosterStack software application that demonstrates an example sensor network as well as network status reporting.
Texas Instruments CC3000FRAMEMK CC3000 FRAM Evaluation Module Kit is a full turn-key TI Wi-Fi evaluation and demonstration tool for MSP430 FRAM microcontrollers and TI SimpleLink™ CC3000 Wi-Fi. The CC3000FRAMEMK comes with all the necessary hardware and software to get started quickly and includes LS Research TiWi-SL Module & EM board and an MSP430 FRAM Experimenter Board. SimpleLink CC3000 Wi-Fi is a self-contained wireless solution that simplifies the process of implementing Internet connectivity. SimpleLink Wi-Fi minimizes host microcontroller (MCU) software requirements, making it the ideal solution for embedded applications using any low-cost/low-power MCU. The TI CC3000 FRAM Evaluation Module Kit also allows users to take advantage of the new generation of MSP430 MCU devices with integrated Ferroelectric Random Access Memory (FRAM).
Texas Instruments products are on Mouser's Applications & Technologies Sites listed below. Select a category to learn about the latest applications and industry trends.
Engineering Development Tools help the design engineer evaluate, create, or debug a design based upon a semiconductor device. Development tools come in a variety of formats including starter kits, evaluation boards, debuggers, or a full blown development environment.
Amplifier and Linear Development Tools
Audio Development Tools
Data Conversion Development Tools
Interface Development Tools
Power Management Development Tools
Processor Development Tools
Switch IC Development Tools
Video Development Tools
Wireless Connectivity Development Tools