TE Categories: Circuit Protection | Connectors | Labels & Wire ID | Passives | Relays | Switches | Wire & Cable | Home
TE Brands: Agastat | Alcoswitch | AMP | Axicom | Buchanan | CII | Citec | Corcom | Deutsch | Holsworthy
Kilovac | Nanonics | OEG | P&B Relays | Q-Cee's | Raychem | Schrack | Home
TE Connectivity offers an expansive portfolio of interconnect products that cover a multitude of industry applications. TE connectors are designed to enable electrical connections in wire-to-wire, wire-to-board, and board-to-board applications. Many product types are represented including RF, I/O, PCB, Power, Terminal blocks, and terminals.
TE is the world's leading supplier of electrical, electronic, and fiber optic connectors and interconnection systems.
TE Connectivity Vertical and In-Line Screwless Wire Connectors are low-cost PCB mount connectors designed to offer an efficient alternative to soldered, wire-to-board terminations. The vertical screwless wire connectors are offered in 2, 4 & 6 staggered positions and the in-line connectors are available in 2 & 3 positions. The connectors are designed for permanent connections within OEM assemblies. Wires are securely held in place but can be removed with an extraction tool if necessary.
TE Connectivity Type Z50 LUMAWISE LED Holders for CREE CXA Arrays are small, low profile, flexible LED holders designed to provide a quick and easy solderless connection to the CREE CXA arrays. The Type Z50 holders allow the direct attachment of CXA LEDs to a heat sink using standard screws enabling designs to be more reliable, easier to use, and faster to market. These devices provide a reliable solderless power connection, secure mechanical attachment, proper thermal hold down forces, and a landing zone with attachment features for additional secondary optics.
TE Connectivity Side Protection Spring Fingers provides an electrical
connection and grounding from EMI noise and static between a PCB and
other electronic components, such as a secondary PCB, shield cam,
antenna, or speaker. Spring fingers (also known as shield fingers,
grounding springs or universal ground contacts) are used in many small
printed circuit board applications. Side Protective Spring Fingers
support operator placement with an enhanced
sidewall design and enables easy design changes with the same footprint
used across the family
allowing them to be interchangeable between a primary and secondary PCB.
Spring fingers are used multiple times in various applications including mobile
devices and personal computing to home entertainment and industrial
TE Connectivity (TE) Ruggedized Optical Backplane
interconnect system (supports VITA 66.1 Standard) provides a
high-density, blind-mate optical interconnect in a
backplane/daughtercard configuration. TE offers the optical system in
both receptacle (backplane) and mating plug (daughtercard) connectors
which interconnect up to two MT ferrules, each accommodating up to 24
fiber paths. Other options are available using industry standard ARINC
801 fiber terminus and TE's Expanded Beam, ProBeam interface in a
four-fiber configuration. The Plug connector housing contains a slot
feature to facilitate cleaning the MT interface and the Receptacle
connector includes two robust guide pins for blind-mating. Typical
applications are in the aerospace and defense industries for use in
adverse environments, and high-bandwidth computing applications
requiring optical infrastructure.
TE Connectivity 0.5mm Fine Pitch Hermaphroditic (FPH) Board-to-Board Connectors meets the electronics market's increasing need for smaller connectors that handle faster speed. Designed to mate to itself, the TE Connectivity 0.5mm FPH connector allows two of the same connectors to mate. With this unique hermaphroditic contact design, customers don't need to have both plug connectors and receptacle connectors for board-to-board applications, eliminating half of the part numbers. This unique design can reduce costs and simplify the connector qualification, documentation and maintenance processes. 0.5mm FPH board-to-board connectors have an extreme operating temperature range and high-speed data transfer capacity.
TE Connectivity zSFP+ pluggable I/O interconnects were designed to quickly and easily upgrade SFP/SFP+ connectors from current 10-16 Gbps speeds to future 28 Gbps speeds. The design is backward-compatible to SFP/SFP+ products, the interconnect is hot-swappable with existing SFP+ connectors for fast system upgrades of 28-40 Gbps. Alternatively, users can design-in the zSFP+ connector for 10-16 Gbps data rates, establishing a progressive path to higher speeds-an upgradeability that can result in longterm cost savings as this would eliminate the need to fully redesign for higher performance. The zSFP+ interconnect is compliant to SFF-8402 and has been adopted for Fibre Channel 32G (28.05 Gbps line rate).
TE Connectivity Pivot Power RJ45 is a new, low voltage power connector that commons RJ45 contacts to provide two power connections through an industry standard RJ45 interface. The connector commons positions 1,3,5 and 7 to one 18AWG wire and 2,4,6, and 8 to another 18AWG wire with simple, fast pivoting termination of both wires at once. The Pivot Power RJ45 features molded in polarity and strip length guides to aid installers and ensure proper and repeatable installation. Ideal for lighting and fire & security applications, the Power Pivot RJ45 is suitable for plenum installation, permitting use in air handling spaces when used with similar rated wire.
TE LUMAWISE LED Socket, Type LK is a solderless quick termination connector system for use with the Philips Lumileds LUXEON® K LED series. The Type LK features driven current up to 1.5A at 75VDC, a quick poke-in wire termination for 22AWG and 24AWG and can be used for the all Philips Lumileds LUXEON® K models – 4, 8, 12, 16, and 24 up LEDs. The socket allows the direct attachment of LEDs to a heat sink using a standard M3 screw, greatly decreasing installation time while increasing reliability and quality control.
TE Connectivity Grace Inertia GI 3.3mm Connectors features advanced design concepts to facilitate a more stable, reliable and durable connection. The new GI connectors also offer 5 types of positions and 4 different colors of keying method, making it easier to identify and avoid mismatching or blind mating. With a high-profile design, the Grace Inertia GI 3.3mm Connectors are ideal for washing machines and applications requiring
TE Connectivity developed the CHAMP Series Ribbon Cable Connectors to meet the requirements of high density, wave-solderable applications in miniaturized designs. The compact surface mounting area in CHAMP Series Ribbon Cable Connectors from TE Connectivity enable designer engineers to maximize PC board space without compromising interconnection capability. The CHAMP Series Ribbon Cable Connectors are fully intermateable with similar existing connectors and can accommodate designs with single- or double-sided printed circuit boards with printed circuit board thicknesses of .062mm, .093mm or .125mm. Ideally suited for medical equipment, data control systems, telephone interconnect systems, and electronic instrumentation.
TE Connectivity expanded its line of CHAMP Series Ribbon Connectors to include low profile cable plug connectors and receptacles with the options for EMI shielding, right angle mounting, through-hole and SMT termination.
TE Connectivity developed the CHAMP Series Ribbon Cable Connectors
to meet the requirements of high density, wave-solderable applications
in miniaturized designs. The compact surface mounting area in CHAMP Series Ribbon Cable Connectors from TE Connectivity enable designer engineers to maximize PC board space without compromising interconnection capability. The CHAMP Series Ribbon Cable Connectors are
fully intermateable with similar existing connectors and can
accommodate designs with single- or double-sided printed circuit boards
with printed circuit board thicknesses of .062mm, .093mm or .125mm.
Ideally suited for medical equipment, data control systems, telephone
interconnect systems, and electronic instrumentation.
View entire CHAMP Ribbon Connectors Series
TE Connectivitys' Industrial Mini I/O Connectors are small, compact, latching, wire-to-board I/O interfaces. TE's Industrial Mini I/O Connectors
feature two points of contact for increased reliability in high
vibration environments, polarization to prevent mis-matching,
availability in both SMT and through-hole configurations, a
unique latching system that protects the plug from pull-out, and eight
individual circuits that accommodate I/O signals. Measuring one-quarter the size of conventional RJ45 plugs, Mini I/O Connectors are commonly used as an RJ45 replacement.
TE Connectivity Front Style Terminal Block Plugs feature a wire entry cavity and an activating screw head on the same plane which is parallel to the plug in direction. These plugs are
300V, 16A, offer a 5.0mm and 5.08mm centerline spacing, and will mate to
industry standard vertical and right angle headers. A wide range of
wire (14-24) AWGs are accepted. Applications for the TE Connectivity Front Style Terminal Block Plugs are
industrial controls, HVAC controls, communications equipment, field
wiring for either power or I/O connections, and stacked (side by side)
pluggable terminal block connections.
TE Connectivity's SOLARLOK® Photovoltaic Junction Box concept is based on a flexible, open system structure which allows serial as well as parallel interconnection via direct wire connect or separable connectors. With 3 sizes of junction boxes, up to six contact termination rails are available for photovoltaic foil connection.