Phoenix Contact Cable Entry System (CES)
Phoenix Contact Cable Entry System (CES) allows pre-wired cable to easily pass through an enclosure wall or panel without cutting the terminated connector end. Comprised of a sealing frame and multiple cable grommets, features of the system include ingress protection of up to IP65, compatibility with standard rectangular connector cut-outs, and easy assembly. Two frame styles are offered: the screw-mounted version provides IP65 protection with cable ties; the latching style offers IP54 protection. The cable grommets are available in either gray UL97V 0-rated thermoplastic or black UL94HB-rated NBR.
Phoenix Contact North American Cordsets
Phoenix Contact M8 & M12 Sensor Actuator Cordsets are manufactured in the United States, decreasing lead-times and are built to a North American look and feel. M8 and M12 form factors have become an industry standard for robust and watertight quick-connect applications in industrial communications, sensors, and actuators. Phoenix Contact’s North American Style Cordsets are ITC/PLTC rated for use in cable trays and raceways. The cordsets are PVC jacketed for a lower cost, with great resistance to chemicals, are dual rated, and are also UL Listed, which allows the cable to be installed on industrial machines within the guidelines of NFPA 79. All cables are also sunlight resistant allowing them to be installed in outdoor environments. Phoenix also offers a wide range of M12 CANopen/DeviceNet Bus System cables in PVC jacket material, as well as 4 & 8 wire M12 Polyurethane jacketed Ethernet Network cables.
Phoenix Contact WLAN Wireless Modules
Phoenix Contact WLAN Wireless Modules are designed to meet the demands for higher speed wireless Ethernet in industrial environments and feature a high performance 802.11n wireless standard, which allows for Multi Input / Multi Output functions to significantly increase the speed and range for wireless communications. The new 802.11n wireless Ethernet interface modules are also backwards compatible with 802.11 a/b/g modules being used in existing networks. Phoenix Contact also offers a wide variety of antennas, cable assemblies, enclosures and hardware to simplify implementation of high speed Ethernet in industrial applications.
Phoenix Food & Beverage Sensor Products
Phoenix Contact Sensor / Actuator Cables and Connectors product line has
been expanded to include M12 Cables and Connectors that meet the
stringent requirements of the FDA & EHEDG, for use in Food &
Beverage Production Industries. This new product range available from
Phoenix Contact features a bright polypropylene jacket material for all
cordsets, and come in 2 designs, Wash-Down & Hygienic. The Wash-Down
design features a plastic knurl M12 connector with a smooth and easy to
clean surface particularly suited for the spray zone area, while the
Hygienic design features a smooth stainless steel M12 connector to
prevent any residual food accumulation and is exceptionally suited where
contact with any food is possible. Four- and five-position versions are
available in different connector head orientations for both designs,
and four-position shielded versions are also available in the Hygienic
design cables, for areas subject to high levels of electromagnetic
interference. Additionally, Phoenix Contact also offers an entire range
of stainless steel Sensor / Actuator distributor boxes, panel feed
through, and field wire-able connectors to accommodate all wiring
connecting needs for the Food & Beverage Industry. All Food &
Beverage connectors, cordsets, and components are IP69K rated for
guaranteed sealing against any stream jets, or high power water spray.
Phoenix Contact PLH & PLA Terminal Blocks
Phoenix Contact PLA and PLH Locking Lever Spring-Cage Terminal Blocks are designed to meet the need for power connections in increasingly compact, high-current applications. As part of the COMBICON family of Tool-Free Spring Cage Connection Terminal Blocks, the PLA and PLH terminal blocks use push-lock technology to make conductor connections on the PC board without the use of tools. The PLA and PLH Terminal Blocks provide an ideal solution for high power connections to the PCB using an angled or horizontal design. The PLA and PLH Locking Lever Spring-Cage Terminal Blocks are well-suited for frequency inverters, power supply units, solar inverters, and drive controllers.
Phoenix PTME Test Disconnect Terminal Blocks - EXPANSION
Phoenix Contact Push-in Technology Terminal Blocks have been
expanded to include PTME Series Test Disconnect Terminal Blocks.
The PTME Series is the first of its kind to use Phoenix Contact's Push-In Technology for the test, measurement, and maintenance of equipment.
Phoenix Contact Push-in Technology Terminal Blocks are the new generation of modular terminal blocks in the Clipline Complete System. The Push-in
Technology Terminal Blocks feature an easy, direct conductor connection
using the advantages of the CLIPLINE Complete System. With up to 50%
lower insertion force necessary, it is now possible to directly plug
solid and stranded conductors with ferrules from 0.34 mm² without tools.
Phoenix Contact Push-in Technology Terminal Blocks use a special
contact spring that makes plugging easier than ever while providing high
contact quality.
View Phoenix Contact Push-in Technology Terminal Blocks
Phoenix PT 6 6mm² Terminal Blocks - EXPANSION
Phoenix Contact Push-in Technology Terminal Blocks have been
expanded to include PT 6 Series Terminal Blocks with an 8.2mm width. The
8.2mm width allows the newly introduced PT 6 Series to terminate larger
6mm² stranded or ferruled wire compared to existing PT Series that
accommodate 1.5mm² or 4mm² stranded and ferruled wire. Phoenix
Contact offers the PT 6 Series in Twin (three
connections), Quattro (four connections), and COMBI (pluggable) options.
Phoenix Contact Push-in Technology Terminal Blocks are the new
generation of modular terminal blocks in the Clipline Complete System.
The Push-in
Technology Terminal Blocks feature an easy, direct conductor connection
using the advantages of the CLIPLINE Complete System. With up to 50%
lower insertion force necessary, it is now possible to directly plug
solid and stranded conductors with ferrules from 0.34 mm² without tools.
Phoenix Contact Push-in Technology Terminal Blocks use a special
contact spring that makes plugging easier than ever while providing high
contact quality.
View the Push-in Technology Terminal Blocks
Phoenix CB Series Pluggable Circuit Breakers
Phoenix Contact's CB Series Pluggable DIN Rail Circuit Breakers
product line offers thermal-magnetic and electronic circuit breakers
designed to plug into a DIN Rail mounted base. The compact design
features Push-In wire termination technology and precise nominal current
levels. A Selective Fuse Blow (SFB) trip option is available for the
thermal-magnetic type and visual status with remote reset / On-Off
controls are available for electronic type. SFB technology triggers
standard circuit breakers magnetically and quickly to provide up to six
times the nominal current for 12 ms. Supply/remote signaling can be
bridged with CLIPLINE complete accessories. The CB Series is available
in 1 Pole Thermal-Magnetic Fast Trip, 2 Pole Thermal-Magnetic SFB Trip, 2
Pole Thermal-Magnetic Medium Trip, 2 Pole Thermal-Magnetic Fast Trip, 1
Pole 24 DC NC Contact, and Plug-In Bridge versions. Phoenix Contact
also offers a bridge trimming tool, tool for crimping ferrules, and wire
insertion tool for the CB Series. CB Series Pluggable DIN Rail Circuit
Breakers are used in the in the control cabinet for industrial
automation applications to shut down a system or selective device in
case of an error.
Phoenix PTS Terminal Blocks - EXPANSION
Phoenix Contact PTS Series has been expanded to include 5mm pitch
Pin Strip Pluggable Terminal Blocks with Push-In Wire Termination
Technology. PTS Pin Strip Pluggable Terminal Blocks allow for faster
wiring to the terminal block, compared to the standard screw termination
and the solid conductor plug in options. The design enables users to
string multiple terminal blocks on one header.
Phoenix Contact PTS Series Fixed PCB Terminal Blocks with the Push-In
Technology wire termination system offer fast wire assembly without the
use of tools. The PTS Series Fixed PCB Terminal Blocks are available in
5.0mm and 7.5mm pin spacing versions for compact designs. The PTS Series
has ratings of 10 A and 300 V. Phoenix Contact offers the PTS-style
blocks with an integrated test point for quick identification of proper
connections. The PTS Terminal Blocks are assembled as individual
slices, making it easy to customize the pole count or color coding.
View all PTS Series Terminal Blocks with Push-In Wire Termination Technology
Phoenix Contact M8 8-Position Connectors & Cable Assemblies
Phoenix Contact M8 8-Position Connectors & Cable Assemblies
are small, industrial M8 connectors developed to meet the demand for
increased signal carrying capabilities in space-saving designs. M8
8-Position Connectors & Cable Assemblies offer 1.5A rated current,
30V voltage, and ≥ 100 MΩ insulation resistance. M8 8-Position
Connectors & Cable Assemblies provide IP65/IP67 protection and meets IEC
61076-2-104 standards with a surge voltage category II and pollution
degree of 3. The M8 series is available in male and female panel mount
connectors and cable assemblies.
Phoenix Contact CAT6A Rated Connectors
Phoenix Contact CAT6A Rated, X-coded M12 connectors, cable assemblies, RJ45 connectors and adapters are designed to meet CAT6A specifications with data transmission rates up to 10 Gbps. These connectors offer 0.5 A rated current, 48V voltage rating, and 5.3 ns/m signal runtime. The Phoenix Contact CAT6A connectors are an ideal solution for high-speed Ethernet in industrial environments.
Phoenix Contact Valvetrab-MS T1/T2
Phoenix Contact VALVETRAB-MS T1/T2 provides varistor-based lightning protection with a high discharge capacity and low residual voltage for Type 1 or Type 2 lightning level applications. VAL-MS-T1/T2 can safely discharge 12.5 kA I-imp (10x350) of lighting current. VAL-MS-T1/T2 accommodates most power systems worldwide, even systems with high mains voltage fluctuations. VAL-MS-T1/T2 is well-suited for water/wastewater, process industry including oil and gas, telecom, energy and utility, automotive, machine building, wind, pharmaceutical, and control systems.
Phoenix Contact PT 6, PT 10 Terminal Blocks - EXPANSION
Phoenix
Contact Push-in Technology Terminal Blocks has been expanded to include the PT 6 and PT 10 series. The PT 6 and PT 10 blocks are designed to terminate to 8 AWG and 6 AWG wires respectively.
Phoenix Contact Push-in Technology Terminal Blocks are the new generation of modular terminal blocks in the Clipline Complete System. The Push-in
Technology Terminal Blocks feature an easy, direct conductor connection
using the advantages of the CLIPLINE Complete System. With up to 50%
lower insertion force necessary, it is now possible to directly plug
solid and stranded conductors with ferrules from 0.34 mm² without tools.
Phoenix Contact Push-in Technology Terminal Blocks use a special
contact spring that makes plugging easier than ever while providing high
contact quality.
View the entire Push-in Technology Terminal Blocks series.
Phoenix Contact PTS and PTTBS 1.5mm Angled Terminal Blocks - EXPANSION
New! Phoenix Contact now offers 1.5mm Angled Terminal Blocks.
Phoenix
Contact has expanded its line of Push-in Technology 1.5mm Terminal Blocks to include angled terminal blocks. The 1.5mm Angled Terminal Blocks offer easy and fast
termination of ferruled and stripped, stranded wire from 26-14 AWG. The
1.5mm Terminal Blocks include single- and double-level, as well as pluggable Combi options.
Phoenix Contact Push-in Technology Terminal Blocks are the new generation of modular terminal blocks in the Clipline Complete System. The Push-in
Technology Terminal Blocks feature an easy, direct conductor connection
using the advantages of the CLIPLINE Complete System. With up to 50%
lower insertion force necessary, it is now possible to directly plug
solid and stranded conductors with ferrules from 0.34 mm² without tools. Phoenix Contact Push-in Technology Terminal Blocks use a
special contact spring that makes plugging easier than ever while
providing high contact quality.
Now available! Phoenix Contact now offers 4mm² Push-in Technology and 1.5mm Terminal Blocks.
View the entire Push-in Technology Terminal Blocks series
Phoenix Contact MSTB & FKC Lock and Release Terminal Blocks
Phoenix Contact MSTB & FKC Lock and Release Terminal Blocks contain levers that automatically snap-lock onto the header during insertion. Headers are available in either horizontal or vertical PCB-mount and can be applied using wave solder processes. High-temperature, pin-in-paste headers are also available for reflow soldering. Applications for Phoenix Contact MSTB & FKC Lock and Release Terminal Blocks are automation, voltage supply of modules, measurement and control, drives, and general signal connection.
Phoenix Contact Surge Protection Devices for Photovoltaic (PV) Systems
Phoenix Contact Surge Protection Devices for Photovoltaic (PV) Systems guards against damaging voltage surges due to lightning and other disturbances. These devices offer protection to the PV grid and the power inverter. Features include remote monitoring, pluggable DIN rail mounting, and visual and remote status monitoring.
Phoenix Contact Panel Mounting Frames
Phoenix Contact Panel Mount Frames provide IP67 protection, feature Freenet RJ45 socket inserts, and meets CAT5e specifications. These connectors are available with 6 positions, 100mA current rating, 5V voltage range and an 0ºC to 55ºC operating temperature range.
Phoenix Contact RJ45 Plug Connectors
Phoenix Contact Push/Pull RJ45 Plug-In Connectors with QUICKON fast
connection technology provide quick and efficient connections capable of
data rates of up to 10 Gbps. RJ45 Plug Connectors offer IP65/67
protection and meet CAT5e specifications, making these connectors ideal
for industrial applications. RJ45 Plug-In Connectors are available for
1-wire and 7-wire conductors with 22 AWG rating, and a cable diameter of
5.0mm - 8.0mm.
Phoenix Contact FL SFN Ethernet Switches
Phoenix Contact FL SWITCH SFN Ethernet Switches include 5- and 8-port
standard function factory line switches with narrow housings. FL SWITCH
SFN supports quick and cost-effective Ethernet network expansion to the
field level. The switches include as many as two glass fiber ports
provided in SC or ST format. Optional fiber optic ports may be used to
extend the segment length up to 20 km and achieve data transmission
rates of 100 Mbps. FL SWITCH SFN provides the auto negotiation function
through the twisted pair ports and offer transmission speeds of
10/100/1000 Mbps depending on the switch version. In addition, the
switches support mixed operation for the connection of segments with
different data transmission speeds. With additional gigabit performance,
alarm contact, redundant power input capability, and narrow housings,
the switches are well-suited for universal remote use in control
cabinets and junction boxes.
Phoenix Contact General Purpose Industrial Relays
Phoenix Contact offers rugged Industrial Relays with a lockable manual test button for universal use with a screw spring-cage connection. General Purpose Industrial Relay modules typically consist of of a relay base, a plug-in industrial relay, a plug-in interference suppression module (AC types only), and a relay retaining bracket with eject function. Relays may include a status LED and, in the DC version, a freewheeling diode. Yhe 4 PDT versions feature hard gold-plated contacts to allow even small signals from 1 V/1 mA to be switched without issues. Phoenix Contact's General Purpose Industrial Relays meet the requirements of today's control cabinet designs with clear isolation of control signals and load.
Phoenix Contact PTS PCB Terminal Blocks
Phoenix Contact PTS Series Fixed PCB Terminal Blocks with the Push-In
Technology wire termination system offer fast wire assembly without the
use of tools. The PTS Series Fixed PCB Terminal Blocks are available in
5.0mm and 7.5mm pin spacing versions for compact designs. The PTS Series
has ratings of 10 A and 300 V. Phoenix Contact offers the PTS-style
blocks with an integrated test point for quick identification of proper
connections. The PTS Terminal Blocks are assembled as individual
slices, making it easy to customize the pole count or color coding.
New!
Phoenix Contact PTS Series has been expanded to include 5mm pitch
Pin Strip Pluggable Terminal Blocks with Push-In Wire Termination
Technology. PTS Pin Strip Pluggable Terminal Blocks allow for faster
wiring to the terminal block, compared to the standard screw termination
and the solid conductor plug in options. The design enables users to
string multiple terminal blocks on one header.
View the PTS Series Pin Strip Pluggable Terminal Blocks
Phoenix Contact PTQ Mini PCB Terminal Block
Phoenix Contact introduced the two-position PTQ Terminal Block as a mini PCB terminal block with QUICKON IDC fast connection for tool-free conductor connections. The conductor is inserted without stripping and the actuation lever is pushed down. The conductors are securely fixed in the insulation displacement contact by the snap-in mechanism. Releasing the Phoenix Contact PTQ Mini PCB Terminal Block is tool-free by re-opening the actuation lever.
Phoenix Contact Quint UPS
Phoenix Contact Quint UPS-IQ offers an intelligent solution for ensuring maximum system availability. During power failures, Uninterruptible Power Supplies (UPS) continue to supply loads with power by switching to battery operation without interruption. The Phoenix Contact UPS-IQ features IQ technology for superior system availability. IQ technology provides intelligent battery management that keeps you informed of remaining runtime, current state of charge, service life, and performance of the power storage device. Intelligent charging adapts the charging current to provide the fastest possible battery charging. POWER BOOST provides static power reserve, while dynamic power reserve is supplied with Selective Fuse Breaking (SFB) technology. Other features of the Phoenix Contact Quint UPS-IQ include optimum use of buffer time, preventive battery monitoring, and advanced signaling and configuration. The Dual-Layer Capacitor Battery used with Quint UPS-IQ provides for a
wider operational temperature range from -20ºC to +60ºC, allowing
battery back-up solutions to be placed in harsher environments. In
addition, this capacitor technology allows a back-up system to have a
longer operational lifespan of up to 20 years before battery
replacement.