Panasonic Electronic Components SP-Cap Polymer Aluminum Capacitors
Panasonic Electronic Components SP-Cap Polymer Aluminum Organic Capacitor is a surface mount aluminum electrolytic capacitor that uses a conductive polymer as its electrolyte in layered aluminum construction. The SP-Cap product line from Panasonic consists of multiple series that offer capacitance range up to 560µF, voltage range from 2V to 16V, and the lowest ESR/impedance in the industry, achieving very good noise suppression and transient response. Unlike MLCCs, SP-Caps are free from temperature drift and DC/AC bias characteristics. In addition, voltage deration is not needed in SP-Caps as in tantalum capacitors due to their safety features. SP-Caps are the perfect solution for input and output capacitor for various DC/DC converters.
Panasonic Power CSP MOSFETs
Panasonic FJ3P02100L and FK3P02110L Power CSP MOSFETs feature a unique Power Mount CSP package that allows for a 5% improvement in thermal dissipation while reducing the size by 80% over conventional solutions. The package structure consists of a unique pad design and drain clip technology for higher thermal performance. These Panasonic power MOSFET transistors employ a fine trench silicon technology that provides a 47% lower RDS(on) over the same-sized conventional chip. These Power CSP MOSFETs are optimized for load switches that combine low RDS(on) in a smaller form factor. The devices are also an ideal fit for Li-Ion battery applications in which low RDS(on) is necessary.
Panasonic AN3018xA DC/DC Step-Down Regulators
Panasonic AN3018xA Multi-Channel DC/DC Step-Down Regulators with integrated FET and LDO offer a power management LSI Step-Down DC/DC Regulator (1 to 2ch) that uses Panasonic's original Hysteretic DC/DC core control system. The new AN3018xA series devices respond at high speed and minimize output voltage changes when the load current changes suddenly. AN3018xA devices make it possible to use capacitors with small capacitance, allowing for smaller designs and a reduction in the number of external parts. Output voltages are variable by DAC (0.8 to 3.3V) and maximum current is up to 1.2A. These Panasonic devices are designed for use in a variety of applications, including home and portable devices, mobile devices, solid state drives, personal computers, and more.
Panasonic AN440 Stepping Motor Drivers
Panasonic AN440 Stepping Motor Drivers are dual channel H-bridge drivers which can control microstepping bipolar stepping motors with a single chip. Panasonic AN440 Stepping Motor Drivers have a low Ron FET which increases the efficiency of the driver and reduces the power consumption. The driver also uses a special circuit to minimize EMI generation, and also uses OCP, UVLO, and TSD for internal protection of the IC.
Panasonic PAN1721 Bluetooth® Low Energy Modules
Panasonic Electronic Components PAN1721 Series Bluetooth® Low Energy Modules are complete power optimized Bluetooth v4.0 Low Energy (BLE) solutions including an embedded processor, antenna, and BLE stack. PAN1721 is a cost-effective, ultra low-power, system-on-chip (SoC) for Bluetooth Low Energy and ultra low power consumption applications. The module includes an eight channel, 12-bit analog-to-digital converter, 19 GPIOs plus battery, and temperature sensors. A single device for both BLE master or slave nodes. The PAN1721 combines an excellent RF transceiver with a high performance low power 8051 microcontroller, in-system programmable flash memory, 8KB RAM, and many other powerful supporting features and peripherals. The PAN1721 is an ideal choice for applications where battery life is a critical application requirement, using only 500nA in sleep mode. Short transition times between operating modes and power efficient hardware further reduce current consumption.
Panasonic AN3301X Step-Down Regulators
Panasonic AN3301X series Step-Down Regulators feature a highly reliable DC/DC step-down regulator that employs a voltage control system. These Panasonic devices can be operated at a high voltage range (from 5V to 39V) and can also be used for power supply LSI of car-AV systems. These new AN3301X parts have an external clock synchronous function up to 2MHz as well as PLL technology allowing control switching frequency without output voltage malfunction. By integrating a high side SW solution and flag function, the AN3301X Series can provide a suitable power supply system for an external USB. AN3301X Series Step-Down Regulators also include 2ch-external FET type, 1ch-internal FET type, and 1ch-internal FET type with load current feedback function that compensates the output voltage drop. These Panasonic devices are ideal for use in automotive, office automation, and home appliance applications.
Panasonic ERZ-E14 ZNR®Absorbers
Panasonic Electronic Components' ERZ-E14 ZNR® Transient/Surge Absorber Series (Metal Oxide Varistors) is the newest edition to the ZNR® product line that consists of devices used to protect electronic equipment against voltage surges and save board space and cost. The ERZ-E14 Series ZNR® Transient/Surge Absorber from Panasonic Electronic Components offers the same outstanding ZNR® performance as its 20mm counterparts, but in a smaller 14mm size. Features of ERZ-E14 Series ZNR® Transient/Surge Absorbers include exceptional ability to withstand surge current in a compact size, energy handling capability, voltage range from 200V to 1100V, compliance to UL and VDE standards, and RoHS compliance. The ERZ-E14 Series is also a drop-in replacement for Panasonic's ERZ-V20Dxx series parts.
Panasonic AN30888A/B Series High Brightness LED Drivers
Panasonic's AN30888A/B Series High Brightness LED Drivers are suitable for driving high brightness LED’s in LED Lighting applications. These LED Drivers are Boost/Buck-Boost/Buck DC-DC controllers that drive an external power NMOS switch. The design flexibility of the Boost/Buck-Boost/Buck output system is achieved by changing the external circuit. The AN30888A/B Series’ wide operating power supply range allows configuration of the power supply and the number of LED’s to drive required by the specific application. They allow various DC-DC configurations and provide great design-in flexibility.
Panasonic ECW-F(D) Series Metallized Plastic Film Capacitors - EXPANSION
NEW!
Panasonic ECW Series Metallized Plastic Film Capacitors are now available in ECW-F(D) 450VDC. The ECW-F(D) are
designed for DC applications that do not require a significant amount of
pulse current, and for power factor correction and residential
electronics applications. The built-in fuse function, combined with the small case size, make them appropriate for any application requiring DC linkage.
Panasonic Electronic Components ECW Series Metallized Plastic Film Capacitors
are small, low loss polypropylene capacitors with excellent frequency
characteristics and low hum. The capacitors are available in 250VDC,
450VDC, and 630VDC, and 800VDC with a capacitance
range from 0.1µF to 6.8µF (250VDC, 450VDC, and 630VDC), and from 0.010µF
to 0.047µF (800VDC).
Panasonic AN41908A Lens Driver IC
Panasonic's AN41908A Lens Driver IC is a single chip motor driver solution that offers lower acoustic noise, power consumption and saves valuable design-in dollars. Panasonic has designed this new driver to offer precision control in a single chip format, which significantly reduces space required for this functionality on the PCB and reduces development time. High efficiency, safety, wider ranges, low noise and low vibration are what Panasonic designed into this new motor driver solution. This motor driver is analog (vs digital), which makes it open to interface with many different processors/chipsets.
Panasonic Electronic Components PAN1323 Series BLUETOOTH®Triple Mode RF Modules
Panasonic Electronic Components' new PAN1323 Series BLUETOOTH® Triple Mode RF Modules with embedded antenna integrate three popular standards (Bluetooth Classic, Bluetooth Low Energy and ANT™) in one highly flexible RF module. Through the PAN1323 Series BLUETOOTH® Triple Mode RF Modules from Panasonic Electronic Components, Bluetooth Version 4.0 and ANT connectivity are easily integrated into new and current designs by removing RF design and certification barriers from the development of the application. This three-mode gateway module can connect 14 million ANT nodes to over 3 billion Bluetooth nodes. The PAN1323 Series RF modules are based upon Texas Instrument's CC256x integrated circuits and uses a host-controlled interface (HCI), a cost-effective and flexible means to implement Bluetooth network. PAN1323 Series BLUETOOTH® Triple Mode RF Modules are pad-compatible with Panasonic's PAN1325A, PAN1326, and PAN1327 Series and have Bluetooth subsystem, FCC, CE, (ETSI), and IC certifications.
Panasonic Electronic Components DZ24 & DZ2W Series Surface Mount Zener Diodes
Panasonic Electronic Components DZ24 & DZ2W Series Surface Mount Zener Diodes provide significantly smaller surface mount packages and offer high power dissipation and wider thermal design margins. The NEW DZ24 Series 1W Type provides a zener voltage range of 2.4V to 51V while the NEW DZ2W Series 2W Type features a zener voltage range of 4.7V to 51V. Panasonic Electronic Components DZ24 & DZ2W Series Surface Mount Zener Diodes are ideal for power supplies, battery charged circuits, high power LED lamps, and audio applications.
Panasonic Electronic Components AN488xx Hall ICs
Panasonic Electronic Components AN488xx Hall ICs are low power consumption devices that act as a contactless switch using a pulse system that detects a magnetic field that turns devices on and off. Panasonic Electronic Components AN48846B and AN48841B Hall ICs are suitable for wheel keys and track ball applications. These Panasonic Electronic Components devices a magnetic field's polarity change from south to north or from north to south. AN48836B is suitable for magnetic open/close switch applications and can detect the magnetic fields of both the south and north poles without regard to magnetic polarity.
Panasonic ECK-THC Series Ceramic Capacitors
Panasonic ECK-THC Series Surface Mount Ceramic Sub-Class Y1-Rated Capacitors are for power supply applications. This series is for line-to-ground use and has a voltage rating of 250 VAC. The ECK-THC offers capacitance values of 100, 220, and 470pF and capacitance tolerances of +/-10 or +/-20%. Flexible style terminations afford a greater measure of safety. Panasonic's ECK-THC Series Surface Mount Y1-Rated capacitors are a unique industry offering.
Panasonic Center Space Rotary Potentiometers
Panasonic Center Space Rotary Potentiometers offer design flexibility for automotive and measurement equipment applications. Sizes include 44 mm outer diameter/25 mm center space diameter and 39/20 mm. Multiple detent and built-in LED options are available. These potentiometers feature automotive operating temperature and are ideal for automotive air conditioning controls and car audio equipment controls.
Panasonic Electronic Components ELC Series Choke Coils
Panasonic Electronic Components ELC Series Choke Coils are magnetic shield type choke coils, and feature high µ and high Bm cores and a wide inductor range. Applications for ELC Series Choke Coils include CTV, VCR, audio, PC, fax machines, PDP, and home appliances.
Panasonic ECW-U SMD Film Capacitors
Panasonic Electronic Components surface mountable ECW-U Film Capacitors have a stacked metallized PEN film dielectric and are available in 100, 250, and 630 voltages. The ECW-U Film Capacitors from Panasonic Electronic Components have a simple moldless construction and offer small size, reflow solder design, operating temperature range of -55ºC to 125ºC, and RoHS compliance.
Learn More
Panasonic RF Modules
Panasonic Electronic Components provides powerful, highly flexible, cost
effective RF Modules for a wide variety of wireless Personal Area
Network (PAN) applications. New extended range products and small footprints combined with network firmware flexibility make Panasonic an industry leader in the development of cutting edge RF Module technology with over 100 different module choices!
Panasonic RF Module Development Kits
Panasonic RF Module Development Kits provide a software and hardware testing
environment. The unique mother/daughter board design reduces development
costs by allowing a single motherboard to be used to test multiple
Panasonic modules. Kits include two or more modules and test boards,
software, cabling, and documentation.
Panasonic EEH-ZA Hybrid Alum Elec Capacitors
Panasonic Electronic Components' EEH-ZA Hybrid Aluminum Electrolytic Capacitors (type V-ZA) are high-temperature, SMD capacitors that offer an endurance of 5000 hours at 105ºC. The EEH-ZA series capacitors from Panasonic Electronic Components feature capacitance range of 10µF to 330µF, voltage range of 25VDC to 63VDC, operating temperature range of -55ºC to 105ºC, and low ESR and high ripple current (70% over, Lower ESR than Current V-FP).
Panasonic EEH-ZC Hybrid Alum Elec Capacitors
Panasonic Electronic Components' EEH-ZC Series Hybrid Aluminum Electrolytic Capacitors (Type V-ZC) are high-temperature capacitors that have an endurance of 4000 hours at 125ºC, the longest endurance in the industry by each case size. The EEH-ZC hybrid aluminum electrolytic capacitors from Panasonic Electronic Components are surface mount, conductive polymer capacitors that offer a nominal capacitance range of 10µF to 330µF, voltage range of 25VDC to 63VDC, operating temperature range of -55ºC to 125ºC, and low ESR and high ripple current (85% over, lower ESR than Current V-TP).
Panasonic Electronic Components EZJZ/EZJP Series Multilayer Varistors for ESD Pulse
Panasonic Electronic Components EZJZ/EZJP Series Multilayer Varistors for ESD Pulse are ZnO-based multilayer chip varistors that offer excellent ESD suppression due to advanced material technology. Panasonic EZJZ/EZJP Series Multilayer Varistors can replace two Zener diodes and one capacitor. The EZJZ Series includes varistors with low capacitance for high speed signal lines and RF antennas. The EZJP Series features low voltage varistors for general circuits.
Panasonic EP (Thin Type) Electric Double Layer Gold Capacitors
Panasonic Electronic Component's EP (Thin Type) Series Electric Double Layer Gold Capacitor offers 1.0mm case size, the industry's minimum size. In addition, it offers nominal capacitance of 0.03F, maximum operating voltage of 3.3VDC, and RoHS compliance. A reflow soldering method is available (260ºC).
Panasonic EEE-FT Series Lower Voltage Electrolytic Capacitors - EXPANSION
Panasonic Electronic Components has expanded the EEE-FT Series Surface Mount Aluminum Electrolytic Capacitors product line to include lower voltage capacitors starting at 6.3V. The new EEE-FT Series from Panasonic Electronic Components also offers smaller size, higher capacitance, and higher ripple current than the original EEE-FT Series.
Panasonic's EEE-FT Series Aluminum Electrolytic Capacitors are surface mount capacitors that offer high temperature lead-free reflow. These miniature capacitors also
feature an endurance rating of 2000 hours at 105ºC, low ESR,
capacitance value range of 22µF to 820µF, operating temperature range of
-55ºC to +105ºC, and RoHS directive compliance. These capacitors are
very useful in a wide variety of applications where space is limited and
high performance is crucial.
View all EEE-FT Series Aluminum Electrolytic Capacitors
Panasonic Electronic Components ELL-5PR Series Surface Mount Chip Choke Coils
Panasonic Electronic Components ELL-5PR Series Surface Mount Chip Choke Coils cover the lower inductance range of 0.47 to 10μH and offer lower DC resistance than other comparable inductor products. The ELL-5PR Series Surface Mount Chip Choke Coils ' magnetic shielding helps prevent interference noise and unwanted coupling with surrounding circuitry. Applications include output smoothing and maintaining voltage during output FET off cycle. Low DC Resistance and large current handling capability make Panasonic Electronic Components ELL-5PR Series Surface Mount Chip Choke Coils ideal for DC/DC applications, in a small, space-saving 5 x 5 x 1.85 mm form factor. Square core shape improves magnetic efficiency in a small package. Superior saturation characteristics and low DCR contribute to DC/DC converter efficiency.
Panasonic Electronic Components PAN1325A / PAN1315A RF Bluetooth Modules
Panasonic Electronic Components PAN1325A / PAN1315A RF Bluetooth Modules now provide Texas Instruments' NEW CC2560A controller in an easy-to-use RF Module format with FCC, IC and CE certifications. A ROM update from Texas Instruments to the already popular CC2560A IC has allowed Panasonic to improve its top selling PAN1325A / PAN1315A Series. The NEW PAN1325A / PAN1315A Series Modules has
increased power and system efficiency resulting from reduced
initialization script size, start-up time and decreased system memory
requirements. All of Panasonic's Bluetooth RF Modules feature
unique, tiny footprint technology and are designed to accommodate PCBs
with pad pitch of 1.3mm with as little as two layers for easy
implementation and manufacturing. With or without an embedded antenna,
the NEW PAN1325A/1315A Series provides easily integrated Bluetooth connectivity into new and current designs by removing RF design and certification barriers from the application.
Panasonic ERZ-VS34C Series Transient Surge Absorbers
Panasonic developed the ERZ-VS34C Series Transient Surge Absorbers to protect power supply facilities and communications equipment from steep lightning surges. As part of Panasonic's ZNR (Zinc-oxide Non-linear Resistor) product line, the ERZ-VS34C Series protects against surges and saves board space. ERZ-VS34C Series Transient Surge Absorbers offer a very large surge withstand capability in a compact size of 36x47mm, fast response to steep impulse voltage, low clamping voltage for better surge protection, and no follow-on current. RoHS compliant, the ERZ-VS34C Series Transient Surge Absorbers are well-suited for office automation, factory automation, telecommunications, industrial, traffic and railroad systems, power distribution line, switchboard, automatic control devices, and PV inverters. This series is also suitable for surge protection devices corresponding to Japanese Industrial Standards (JIS C 5381-1).
Panasonic Electronic Components ELJ-QE Series Laser-Cut Chip Inductors
Panasonic Electronic Components ELJ-QE Series Laser-Cut Chip Inductors feature an enhanced level of high frequency performance and high self resonant frequency to circuits and multi GHz operation with values ranging from 2.2 to 56nH. ELJ-QE Series Laser-Cut Chip Inductors are non-polar, with a unique ceramic core in a 0603 case size. Panasonic Electronic Components ELJ-QE Series Laser-Cut Chip Inductors capable of being re-flow or flow soldered, are cost effective over wire-wound, and offer ease of mounting. Applications include communications, medical monitoring, and wireless communications.
Panasonic Electronic Components PAN1321i Series BLUETOOTH® RF Module
Panasonic Electronic Components offers the PAN1321i Series BLUETOOTH® RF Module with all of the capabilities of the PAN1321 and the added benefit of compatibility with Apple devices such as the iPod®, iPhone®, and iPad®. Panasonic Electronic Components PAN1321i Series BLUETOOTH® RF Module features a highly integrated, cost engineered solution for Bluetooth applications using Serial Port Profile (SPP). The PAN1321i Series is a comprehensive Bluetooth system solution, with an integrated controller, GPIO, AT Command Set Application Program Interface (API), antenna, Bluetooth transceiver, SPP Profile, FCC and IC certifications and Bluetooth end product listing. Using Panasonic's exclusive "tiny footprint"
technology, incorporating a Surface Mount Device (SMD) Land Grid Array
(LGA) package, the PAN1321i Series is just 15.6 mm by 8.7 mm. Applications for the Panasonic Electronic Components PAN1321i Series BLUETOOTH® RF Module include most wireless applications, smart phones, heart rate monitor, HVAC, and battery monitor.
Panasonic Electronic Components EET-HD Series Capacitors
Panasonic Electronic Components' new EET-HD Series Large Can Snap-In Aluminum Electrolytic Capacitors offer longer endurance in smaller case sizes. The EET-HD Series capacitors from Panasonic Electronic Components allow for higher capacitance, higher ripple current, and long endurance life of 3000 hours at 105ºC. EET-HD Capacitors have a capacitance range of 120µF to 680µF.
Panasonic Electronic Components EEU-TP Radial Aluminum Electrolytic Capacitor
Panasonic Radial EEU-TP Series Aluminum Electrolytic Capacitors are
smaller in case size and have endurance up to 2000 hours at 135°C.
Panasonic Electronic Components EEU-TP Radial Aluminum Electrolytic
Capacitor's endurance at 125°C is more than double, up to 5000 hours,
and features high endurance in extreme temperatures.
Panasonic Electronic Components PAN1323ETU Series BLUETOOTH®Development Module
Panasonic Electronic Components' PAN1323ETU Series BLUETOOTH® Development Module is one module for three standards: Bluetooth Classic, Bluetooth Low Energy, and ANT™. The PAN1323ETU Series Development Module from Panasonic Electronic Components is the development tool for Panasonic's entire PAN13xx product line that utilizes a host-controlled interface (HCI), creating cost-effectiveness and flexibility for designers. This "Easy-to-Use" (ETU) module plugs directly into Panasonic development kits, Texas Instruments MSP430, and Stellaris experimenter boards with the added benefit of header connectors that simplify prototype wiring and field trials.
Panasonic Electronic Components PAN1326 HCI Bluetooth Module
Panasonic Electronic Components' PAN1326 Host-Controlled Interface (HCI) Bluetooth Low Energy dual mode module is Texas Instrument's 7th generation Bluetooth core integrated circuit, the CC2564, in an easy-to-use module format. The PAN1326 Series HCI Bluetooth Module features Panasonic's tiny footprint technology in an 85.5mm² device designed to accommodate PCB pad pitch of 1.3mm and as little as two layers for easy implementation and manufacturing. The PAN1326 module has been designed to be 100% compatible with the previous generation, the PAN1325. The unique design feature of the PAN1326 Series module is conducive to seamless switching between Bluetooth classic and Bluetooth low energy via a data chain. PAN1326 series modules have a supply voltage range of 1.7-4.8V, operating temperature range of -20ºC to +70ºC, very fast algorithm for both ACL and eSCO, and more. The PAN1326 series module connects mobile devices such as cellular phones and small button cell battery powered devices like fitness sensors, watches, and healthcare accessories.
PAN1720 Series Bluetooth Low Energy Module
Panasonic Electronic Components' PAN1720 Series Bluetooth Low Energy Module is a single-mode module designed especially for applications that communicate with a dual or single-mode Bluetooth low energy device, such as mobile phones, PDAs, and Laptops. The PAN1720 series from Panasonic Electronic Components includes a Bluetooth low energy stack that currently supports the Proximity and Battery profiles. In addition, the PAN1720 Series module is manufactured in a very small (15.6 x 8.7 x 1.9mm³) SMD package with shielded case and will be qualified to the Bluetooth 4.0 standard. The PAN1720 series also offers supply voltage range from 2.0V to 3.6V (typ. 3.0V), operating temperature range from -40ºC to +85ºC, two powerful USARTs with support for several serial protocols, full-speed USB 2.0 interface, and 19 general-purpose I/O pins (17x4mA, 2x20 mA). Evaluation modules available.
Panasonic ETQ-P3W Series Power Choke Coils
Panasonic ETQ-P3W Series Power Choke Coils feature a low profile (3mm. height) and low DC resistance for high frequency. Panasonic ETQ-P3W Series Power Choke Coils offer a rated power range of 8.1A down to 3.8A for inductances ranging from 0.92μH to 4.2μH. Panasonic ETQ-P3W Series Power Choke Coils are made of a metal composite core material and wirewound construction.
View entire ETQ-P Product List
Panasonic ERA Series Thin Film Chip Resistors
Panasonic's ERA Series Thin Film Chip Resistors feature high reliability, high accuracy, high performance, and RoHS compliance. The ERA Series Thin Film Chip Resistors from Panasonic are stable at high temperature and humidity, have tight resistance tolerance and Temperature Coefficient of Resistance, low current noise, and excellent linearity. Panasonic's ERA Series Thin Film Chip Resistors are available in case sizes 0402, 0603, 0805, and 1206 with resistance tolerances of ±0.05% and ±0.1%.
Panasonic Electronic Components ECQ-U(A) Series X2 Suppression Film Capacitors
Panasonic Electronic Components ECQ-U(A) Series X2 Suppression Film Capacitors
offer a slightly smaller dimension than the ECQ-U(L) Series. The
ECQ-U(A) Series X2 Suppression Film Capacitor, Panasonic Electronic
Components' first available small-size X2 polypropylene capacitor, has a
polypropylene dielectric included that makes it ideal for high
frequency and high current applications. In addition, these capacitors
have an inbuilt fuse function and open circuit failure mode that makes
them highly beneficial for safety applications. ECQ-U(A) Series
Capacitors offer a capacitance range from 0.01 to 1.0µF, voltage range
up to 275 VAC, and capacitance tolerance of ±10% and ±20%.
Panasonic Electronic Components EEF-GX and EEF-LX Series Specialty Polymer Capacitors
Panasonic Electronic Components' EEF-GX and EEF-LX Series Specialty Polymer Capacitors (SP-Caps) are new editions to an already excellent line of SP-Cap products. Panasonic Electronic Components' EEF-GX and EEF-LX Series SP-Caps feature capacitance range of 330µF-560µF, very low ESR, 2VDC to 2.5VDC power, operating temperature range -40ºC to +105ºC, stable capacitance at higher frequency, and more. The new EEF-GX and EEF-LX Series SP-Caps are reliable alternatives to tantalum capacitors.
NEW! Panasonic Electronic Components has expanded the SP-Cap product line to include the EEF-CX and EEF-SX Series.
Panasonic EEU-HD Series Electrolytic Capacitors
Panasonic EEU-HD Series Radial Electrolytic Capacitors are improved with smaller case size, higher capacitance and up to 50% greater capacitance values for general application usage. The smaller case size of these Panasonic Electrolytic Capacitors can help save valuable board space and help with overall board design costs. For use in industrial and home appliance applications. Panasonic Electrolytic Capacitors has an operating temperature range of -55° C to +105° C.
Panasonic Electronic Components ERJ Low Resistance Resistors
Panasonic Electronic Components' ERJ Series Thick Film Chip Resistors offer low resistance range from 0.1 ohms to 9.1 ohms. The small, lightweight ERJ Series resistors from Panasonic Electronic Components have a metal glaze thick film resistive element and three layers of electrodes that make the resistor highly reliable. The ERJ Series is suitable for current sense applications and can be flow soldered or reflow soldered.