New Products by week

IO-Link® master interface with physical layer transceiver and two linear regulators.

Offers low voltage operation and rail-to-rail input and output.

Feature 80 volts of working voltage, individually balanced cells, and threaded and protected terminals.

Now includes a 3A version with new clip for easier installation

Extends communication for timing critical or harsh environment applications.

Safety capacitors certified for automobile systems, including power trains and safety equipment

7W AC/DC source for LED lighting with a wide input voltage range and constant current outputs of 350mA, 500mA, or 700mA.

Saves up to 50 percent more space following the market trend of smaller and thinner devices.

Increase or decrease fan speed in response to air temperature.

Now includes a 3-pole switch that offers versatility to control an extra function or indicator light

High peak power (up to 1.2 kW) and high ruggedness capability (infinite:1 VSWR).

Designed to minimize conduction and switching losses, especially in hard-switching applications.

Include output sense pins to compensate for output voltage inaccuracy delivered at the load

Utra-low-power MSP430 with two built-in 16-bit timers and a universal serial communication interface.

Designed for heavy-duty applications requiring long rotational life, up to 50 million cycles, & high reliability.

Stacked coin type capacitors that offer long life and high capacitance values

New IL13-US2-SJT-3100-xxx parts are hospital grade power cords.

Single-row, right-angle strips, up to 20 positions per strip.

Silicon Carbide 3 phase module w/ Z-FET™ MOSFET & Z-Rec™ Diode offers ultra low losses w/ high efficiency operation.

First SMT detect switch in a 4.7 x 4.2mm package size with an IP64 rating.

Combines application specific IGBTs, diodes, proprietary control functions, smart protections and extra optional features.

An ideal crystal oscillator (XO) upgrade replacement solution.

Precision analog output CMOS ICs with a class-AB output structure.

Features powerful i.MX 6Quad applications processor & based on Freescale SABRE Lite platform.

Ideal for portable hand-held devices, wireless nodes, peripherals that require device authentication.

Available in three termination styles for audio applications

Combines 3M’s twist and flat cable technology with a halogen-free polyolefin (PO) dielectric for a differential signaling cable capable of IDC termination.

Highly integrated current-limit and overvoltage-protection solutions for up to 40V and 4.2A.

Used for bridging USB interfaces to a SATA hard disks.

High performance bridge designed to migrate legacy PCI and PCI-X bus interfaces to the new advanced serial PCI Express.

Designed for high performance, high availability, and low-power applications.

Includes a wide range of MEMs sensors.

Represent the most compact offering in Carlin's pushbutton switch line.

Combines leading RF transceiver with a range-boosting power amplifier.

Resistance range down to 1mΩ, improved TCR.

Uses a 0.18µ SiGeC Bi-CMOS process to achieve high frequency performance with low noise and low power.

Feature-rich, 4-channel, 12-bit DAC with internal reference selectable to 2.048V, 2.500V, or 4.096V.

4 to 20GHz general purpose amplifier in a small case size (1.5mm x 1.2mm).

Reduces power consumption by approximately 22%

Robust version (7 amps) of the standard suppressor devices that have a typical amperage of 3-5 amps.

Features a rotary backlock mechanism and an applicable FPC thickness of 0.3 mm. Available in two models: low profile with a depth of 3.5 mm & easy-operation with long slider.

har-flex Cable Assemblies with 6, 12, 26, 32, and 50 positions and cable lengths of 0.1, 0.2, and 0.5 meters.

Energy efficient, high-power flyback power supply ICs incorporate a primary side regulated (PSR) controller and high-voltage power MOSFET in a single package.

Dual ½-H-Bridge motor driver with individual control interface.

Offers twice the number of contacts in half the size of a standard connector.

Smallest BNC available, bayonet coupling positive lock.

Integrates power MOSFETs that employ a hysteretic control system.

Magnetically latched PCB relays that offer increased ambient temperature range up to 125ºC.

United Chemi-Com LXM Series Aluminum Electrolytic Capacitor offers long life performance with 7000 hours at 105°C.

2W UV LEDs offer 2x power w/ same footprint as standard 1W package, & surface mounted design for space savings.

Consumes only 470nA per channel supply current.

Medical products manufactured into a ribbon format for routability

High-speed MUX switch supports Thunderbolt™ I/O technology.

Smallest PIC MCUs with I2C support.

Micro-sized, Illumination grade emitters & first ever 1-step MacAdam Ellipse warm white LEDs.

Offering bidirectional port protection & lower clamping voltages under surge than competing MOV technology.

High-performance, CrCM, single-ended controller used for single-stage conversion of the AC mains to a constant current source with PFC.

10Gb/s Enhanced Small Form Factor Pluggable transceiver for 10Gb, multi-rate links up to 10km over G.652 single mode fiber.

Industrial Temperature 850nm 10Gb/s SFP+ transceiver for 10G Ethernet links over multimode fiber.

Offering lowest power SFP for Gigabit Ethernet, with 30 percent power savings.

Compliant w/ QSFP+ MSA & IEEE 802.3ba 40GBASE-SR43 for 100m & 40Gbps links over multimode OM3 fiber.

Rugged, reliable IGBTs for UPS, solar, industrial motor and welding applications.

Comprehensive software development tool designed for use with Altera's SoC FPGA's.

Include such features as high speed, compact size, and cost savings.

Schneider Electric XB5S Harmony Biometric Switches offers the latest advanced fingerprint recognition technology providing increased security for your employees, machines and systems.

Schneider Electric Magelis XBT/N/R/RT Graphic Terminals is breaking new ground with a compact, easy to install and configure display units.

Offers the lowest profile and lowest insertion loss available in the industry.

Designed for the management of simple automation systems from the design stage to monitoring applications in the industry and tertiary sectors.

High voltage up to 3000V

Very low dropout, low ground current positive voltage regulators that are capable of providing an output current in excess of 1.5 A.

Delivers outstanding system performance and unrivalled flexibility to satisfy even the most demanding serial applications.

Provides linear output proportional to the travel of the button. Controls the motion of a device as well as the speed of the movement.

Offering a dual load switch using double RETs and double BISS transistors.

High-Power, High-Speed Infrared Emitters in Gullwing, reverse Gullwing, and Side-View SMD Packages.

Offer high reliability performance, wide viewing angle of 120º, & industry-standard SMT PLCC-2 package.

Provides superior performance in demanding switching applications, offering both low on-state voltage and minimal switching loss.

RTC and calendar with an integrated TCXO and a 32.768kHz quartz crystal optimized for very high accuracy/low power consumption.

Ultra-low-cost development platform enabled by the Kinetis K20 USB MCU family.

Designed for use with OTTO switches.

Offer excellent mechanical and electrical performance while operating demanding applications. 

Available with a variety of features including actuation, mounting, circuitry, and button styles and colors.

Features a compact design, IP68S rating, and 5 million operational cycles in all directions.

Wurth Electronics WR-FFC 0.50mm Flat Flexible Cables have been developed to meet the high combination of requirements like low profile, light-weight, secure and removable connections.

Meet all requirements of MIL-PRF-8805/76 or MIL-PRF-8805/101.

Provides the performance of a full sized, dual axis joystick in a miniature package.

High-speed optocoupler with open collector output, utilizes Optoplanar® coplanar packaging technology.

Support medical device manufacturers by delivering the latest interconnect technologies for maximum product efficiency, reliability and flexibility.

Wide frequency range over 1000MHz, rated current range of 0.1 to 0.5A.

Delivers 24-bit digital video data over a single differential pair.

Switching spark gaps designed specifically for voltage controlled switching of capacitive discharge circuits.

High reliability package w/ silicone encapsulation & water-resistance (IPx6) per IEC 60529:2001.

Environmentally sealed (IP68) connectors with power handling capabilities up to 80 amps at 600 volts AC or DC with signal, F1 weatherability rating, and flame resistance rating of V-0.

Phoenix Contact M8 & M12 Sensor Actuator Cordsets are manufactured in the United States, decreasing lead-times and are built to a North American look and feel.

Exceeds EN/IEC/UL60601-1, 3rd edition, for medical applications.

Require no wired connection; available in rectangular & circular modules, in 6500K white & 3500K white.

High reliability, fast response time to ESD strikes.

Microcontroller board based on the Atmel ATmega32u4 and was derived from the Arduino Leonardo.

Designed for use in applications which require extremely low no load power consumption.

Embedded cloud module with integrated 802.11 b/g Wi-Fi and 10/100 Ethernet.

First solution combining 4- and 5-wire resistive screen controller with basic gesture recognition and up to 4 cap touch sensing electrodes.

Featuring event-driven smartBASIC programming interface & Nordic Semiconductor nRF51822 chipset.

Made of gold-plated copper-beryllium can be SMD assembled by means of a pick-and-place platform.

Fully USB 2.0 compliant digital isolator featuring ADI's iCoupler® technology.

Provides a standard RJ45 interface, ideal for harsh environments where Ethernet/IP protocol is used, conforms to 10BaseT or 100BaseT Ethernet data rates.

Combines high capacitance and high ripple current capability for medium power inverter systems

Allows designers to quickly and easily evaluate and develop Bluetooth Audio prototypes.

Offers High-Bay board, w/ LPC1114 MCU, TDA5051A PLM IC, PCF8883 switches, & LED array.

Dual, 14-bit, 250MSPS ADC with configurable JESD204B output block.

Nonvolatile solution for 128- / 256-position adjustment applications.

Industry's best combination of offset voltage, voltage thermal drift, and more for front-end amp circuits.

For over voltage protection, power off protection, high ESD and latch-up proof performance.

The industry's highest frequency PLL.

True 18-bit, unbuffered voltage output DAC that operates from a bipolar supply of up to 33V.

Low noise, low distortion differential amplifiers with very low power consumption.

Provides a nonvolatile solution for 128-/64-/32-position adjustment applications.

Drives up to 8 LEDs in series from a voltage source of 6 to 30V.

Designed for use in the secondary side of AC-DC power supplies for notebook PC adapters, game consoles, servers, desktop PCs, and flat-panel displays.

Only UL 2703 certified PV grounding component for use with a ground wire; eliminates potential code compliance surprises.

Peak current-mode controllers with active clamp reset for increased efficiency.

Helps to evaluate class-D audio amplifiers (TDA7492, TDA7491LP, TDA7491P, TDA7491HV, and TDA7491MV).

Highly integrated PWM controller capable of delivering a rugged and high performance offline power supply.

Phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 4 pin plastic dual inline package.

Offer low dissipation factor and excellent stability

Offered as a replacement for hard-wired cabling to make installation and maintenance easier and faster.

Offer optimum performance in applications with temperature range up to 200ºC

Relay drivers designed to drive dual-coil polarized latching relays that connect and disconnect power in smart electronic meters and solar inverter applications.

Designed for low load current characteristics typical in LED lighting applications; offers full control of light output at the extreme low end of load conditions w/min. probability of flickering.

Designed for low load current characteristics typical in LED lighting applications; offers full control of light output at the extreme low end of load conditions w/min. probability of flickering.

har-flex right angle connectors available in a wide range of pin count configurations; provides more design flexibility for B2B and W2B applications.

Efficient, space saving solution that offers thin and small packaging.

Protect a low noise receiver from the high voltage transmit pulses in ultrasound applications

Low minimum operating current makes them an ideal choice for secondary regulators in SMPS adapters.

Combines 3M’s proven medium flex life conductor with a low smoke zero halogen PO dielectric; rated up to 10 million flex cycles over a 1 3/4” bend radius.

Rugged and reliable Ethernet devices designed with your demanding applications and environments in mind.

Includes options of 2 analog outputs (voltage/current) or 2 mechanical relays (AC/DC) for complete industrial process controller.

Broadest selection of RS-232, RS-422, and RS-485 serial connectivity on the market.

Wound from the most reliable polyester film and aluminum foil available

Designed using the STA540SAN dual/quad class AB power amplifier assembled in a Clipwatt 15 package.

Features four serial I/O paths. 80% faster than parallel I/O MRAM using half the pins.

Features RTC Technology by Micro Crystal AG and low power consumption

Switchcraft High Amperage Power Jacks and Plugs have a current rating of up to 11A (carry) or 24VDC.

Complete MicroSiP DC/DC step-up power solution.

Offer high capacitance vs. voltage ratio and super high volumetric efficiency

Offer voltage range from 250V to 3.15kV

Complete laser driver transmitters and limiting amplifier receivers for FTTx or SFP applications.

Radiall BNC 75 HDTV Connectors are the first lightweight composite True 75 Ohm HDTV BNC available on the market.

Designed for Infrared or RF remote control applications

Designed for use in applications which require extremely low no load power consumption.

Provides a low-cost and simple solution for integrating the BodyCom™ system into a wide range of applications.

200 to 800 watt Programmable Power Supply.

Frameless for higher capacitance in smaller package, CV from 1µF to 470µF, 4/6.3/10/16/20/25/35V.

Simplify LED installation for Cree XLamp® arrays & reduce installation time by eliminating hand soldering.

The quietest and most energy-saving 80x80x25mm fan in the industry

Demo Board is designed to propose an innovative and low cost power topology to dim low-voltage halogen and SELV halogen lamps.

Delivers a reflowable miniature square body formed lead SMD package.

Provides direct digital modulation, ultra-fine frequency resolution, fast switching speed, and low phase-noise performance

Feature greater energy density, up to 710 Wh/Kg, and 1420 Wh/I, and operating temperatures ranging from -55ºC to +125ºC.

Provides rapid prototyping for applications requiring high feature integration and low power consumption.

12V & 24V XLamp® XT-E High Voltage White LEDs now available.

Low-current, ultra-small, voltage supervisors with manual reset input, watchdog timer, and active-high and active-low push-pull outputs.

Offer small footprint and high insulation

Qualified to the AEC-Q101 standard and are intended for DC-DC converters used in automotive functions.

Designed for EMI noise suppression in small portable devices

Features 19 strands of high strength copper to provide an exceptionally long flex life of 25 million cycles at 3/4 inch radius.

Lower-cost, high-expansion focused BeagleBone w/ Sitara AM3359 ARM Cortex-A8 32-Bit RISC MPU from TI.

Bourns SA2 Series High Voltage Gas Discharge Tubes devices are designed for high isolation applications.

Harsh environment connectors that meet enclosure rating IP68 and NEMA 250 and feature a patented grommet and o-ring free design.

Eliminates wire dress management issues with discrete wire leads around the top surface of LED printed circuit boards.

Specially designed for ultra-low ESR applications

Offers the lowest ESL in the market for its product type.

Innovative AC-DC conversion that is efficient, simpler, quicker and, with component count halved, less expensive.

IEC 60335-1 model now available.

Crimp-type plug for FI-X 30P notebook-PC LCD interface standard connector; compatible w/LVDS & DisplayPort transmission.

Programmable Dual-Range DC Power Supplies. Single and dual output models with up to 210W output power.

Provides non-contact presence/absence detection of a variety of magnet styles and magnetic actuators.

Industry's smallest true bipolar +/-5V, 18-bit ADC.

Contains all circuitry required for design of wide input-voltage flyback and boost regulators.

Fully integrated solution suitable for driving two-phase bipolar stepper motors with microstepping.

Features very low switching losses and high frequency and high pulse current operation.

New models feature high dielectric strength of 5kVAC between input and output using optical isolation, including the NEWEST 40V load voltage-rated version.

Layout compatible to 1.6 x 1.2 mm footprint, exceptional stability over temperature at -40 to +105°C, ±10ppm, low jitter, and MIL-STD-883 shock and vibration compliant.

Operates over a 4.5 to 60V input voltage range with high accuracy.

Consumes one third of the current for the same response time, compared with currently available devices.

Deliver a single bi-directional channel operating at up to 10.3125 Gbps while using a subtle 240mW (typical) of energy per end.

Features an integrated high side MOSFET and survives load dump pulses up to 65V per ISO 7637.

100V devices with negligible switching losses, extremely fast switching, and high junction temperature capability.

Solderless connectivity for all single color flexible light strips, available in 2 sizes of DC connector ends & wire termination.

Provide a very compact and high performance inverter solution for AC Motor Drives in low-power applications.

Features PCB-to-wire and wire-to-wire options for up to 110 amps with a touch-safe interface.

Linear regulator capable of supplying 250mA output current.

Ultra low-power high performance three-axis linear accelerometer with digital I2C/SPI serial interface standard output.

Features very low conduction losses, negligible switching losses, extremely fast switching, and low thermal resistance.

Available in 2-step and 4-step color consistency w/ 19mm optical source & system-level performance up to 7000lm.

Ideal circuit protection solution for lower DC voltage applications.

Feature filletless products with high reliability and performance, low resistance, are SMD type, and are small with low height.

High-speed devices capable of sinking /sourcing 4A peak currents.

Polymer aluminum electrolytic capacitors that offer low, improved ESR and high ripple current capability

Ultralow switching losses with a minimized Qrr makes it perfect for use in circuits working in hard-switching mode.

Mount directly onto board w/ panel flush design that blends in until light is emitted; in lengths of .300" - 1.20".

Dominant device technology used in high power RF amplifiers for frequencies ranging from 10 MHz to 3.8 GHz.

Superior physical characteristics over standard silicon, with 4 times better dynamic characteristics and 15% less forward voltage.

Specifically customized for Raspberry Pi, w/ 4D Serial Pi Adapter & 5-way female-female cable.

Easy-to-use platforms featuring TI MSP430F517x MCUs.

Offers the lowest ESR/impedance in the industry, achieving very good noise suppression and transient response.

Single and Dual CMOS low-voltage op-amps with rail-to-rail input and output swing.

Automotive Connectors deliver 84-way Sealed Rectangular Connectors for harsh applications in commercial vehicles.

Integrated triple speed Ethernet Physical Layer Transceiver for transmission and reception of data on CAT-5 cable.

Designed for 12V, 24V and 48V vehicle applications.

Dev board allowing quick connection between any standard 4- and 5-wire resistive screen.

DPAK style power resistors that offer very low inductance and high power rating.

High performance, high linearity and low noise analog or digitally controlled variable gain amplifiers.

Packages piezoelectric materials in a protective skin with pre-attached electrical leads, producing a highly reliable component with no soldered wires.

Metric Ring Terminals feature an insulated barrel and are designed for a variety of stud sizes.

Offer excellent frequency stability and low supply current

ARM® Cortex™-M4 MCUs with high performance and feature scalability.

Featuring higher resolution of 1200-3600cpr, operation in high temperatures up to 100ºC, & compatible w/ legacy series.

Input voltage range from 18 to 75Vdc in DOSA eighth or sixteenth brick footprint or 1 x 1 brick.

1st 28-circuit CMC right-angle header on the market. Designed for a space-saving W2B solution in sealed transportation applications requiring up to 21 Amps.

Sixteenth-brick, DOSA-compatible, up to 100 watt output.

Miniature SMD type with built-in 32.768kHz D-TCXO

Dgital amplifier power stage devices for driving speakers up to 100W/2Ω in mono.

Designed to meet the demands for higher speed wireless Ethernet in industrial environments.

Offer low loss and large current capability design

Allows pre-wired cable to easily pass through an enclosure wall or panel without cutting the terminated connector end.

Offers design engineers a variety of options for low power LED drivers.

Widely used throughout the industry to convert a higher input voltage into a lower output voltage.

Reduced power dissipation together with soft switching behavior allows better thermal performance and EMI behavior resulting in lower system costs.

Developed for notebook PC LCD interface applications and is compatible with LVDS transmission and LED backlight.

Insulated, compact, and lightweight enclosure.

Offers lowest profile interconnect solution in the Solid State Lighting industry when used with and integrated header feature in select LED arrays.

Automatically detects input voltage condition and sends an internal reference signal to achieve high power factor.

Perfect solution for applications defined by circular aperture, featuring photonic lattice technology & low thermal resistance.

Features 1 - 4 input phases and dual internal current shunts; tolerates crest factors as high as 10.

16-bit DAC featuring low supply current of 80µA (max).

Provides 5% improvement in thermal dissipation, 80% smaller size.

Up to 47% smaller and up to 65% lighter than PVC cable. 100% recyclable.

Allows easy integration of multi-touch and gestures for a rich user interface.

Simple, low-cost board featuring the high-performance MachXO2-7000HE PLD.

M2M Solution Builder Kit delivers a complete, flexible and cloud-enabled solution out-of-the-box.

Provides 100% output power in any Volt/Amp combination within the rated voltage (80V) and current (60A) limits.

Highly integrated PWM controller with power MOSFET that provides features to enhance the performance of low-power flyback converters.

First completely pluggable grounding solution for potential equalization. IP 65 compliant, designed for fine stranded wires from 6 AWG – 2 AWG, and independent from power contacts.

Facilitates evaluation of & software development around SN8200 Wi-Fi Network Controller Module.

Allows for the quick, easy, and accurate evaluation of TI's family of RS-485 products.

16-bit high-accuracy industrial AFE subsystem reference designs.

Wide variety of options available, including pin size, sealed, high amperage, and sealed options.

Fully-regulated with high efficiency.

ARM-based HPS w/ processor, peripherals, memory interfaces, & FPGA fabric using high-bandwidth interconnect backbone.

Radiall RAMSES Microwave Switches are an innovative system designed for constructing electromechanical coaxial RF switches with increased long term reliability.

An alternative to traditional SMA connectors for applications up to 6 GHz and provide high density and quick connections within and to RF modules.

Convert otherwise wasted energy from mechanical vibrations into useable electrical energy.

High speed ultra portable rechargeable data logger capable of measuring acceleration in all three axes.

Converts the AC output from a piezoelectric energy harvester to a regulated DC output.

Radiall SMP-MAX connectors are the best competitively priced misalignment RF coaxial interconnect solutions on the market today.

Supports the standard Serial Peripheral Interface (SPI), and a high performance Dual output using SPI pins.

Identify wires and cables where extreme resistance to Ultra Violet (UV) and harsh weather conditions are required.

Featuring Freescale i.MX6 Cortex-A9 single core processor w/ 1Ghz HDMI display interface & gigabit ethernet.

Featuring Freescale i.MX6 DualLite Cortex-A9 dual core processor w/ 1GB of memory & onboard Wi-Fi & Bluetooth.

2.4GHz high-linearity devices combining the best of fully differential and variable gain amps.

Achieves up to 5+ Gbps high-speed transmission and fully supports USB 3.0, PCI Express Gen.2, Serial ATA Gen.3 and HDMI 1.4a.

Provides a small and simple contactless switch solution for portable and battery powered applications.

Small size connectors that offer high current capacity up to 40 Amps

Form factor and degree of precision are designed to meet the needs of medical OEMs. MediSpec MMCs can integrate into Class 3 (high diligence) probes and devices.

Frameless feature allows for larger amount of capacitance in smaller package to save board space.

Suited to indoor navigation applications where it reliably calculates dead-reckoning when no satellite signal is available.

High-density, low-profile solution with data rates up to 40 Gbps per differential pair; ideal for OEM’s of telecom and medical equipment with space constraints.

Designed for applications where board space is limited and cool operation is desired.

The BigAMP Inrush Current Limiters are specially designed thermistors able to withstand up to 36 amperes of continuous current and 260 joules of input energy.

Ametherm AS Series Inrush Current Limiters offers thermistor protection for precharge circuit on lithium Ion batteries.

Ametherm MegaSurge™ Inrush Current Limiters are the economical and space saving solution to limit high inrush current.

Only ultra-low profile ZIF connector using the standard  0.12mm FPC thickness. Features a 0.65mm height and 3.55mm depth (implementation depth: 3.08mm).

Provides a simplified method of grounding over all shields with effective EMI/RFI and environmental protection.

Available in 2700K-6500K CCT, w/ min 70, 80, & 90 CRI, for distributed light sources w/ demanding color quality requirements.

Combines display, audio, & touch 3-in-1 functionality as high quality graphic solution for GUI development.

Available in 40W to 65W and 90W to 110W.

Low profile and wide range AC input.

Meets tight tolerance requirements for invasive and implantable medical applications. Delivers high reliability down to 50 AWG in a wide range of biocompatible conductor materials.

Designed for Freescale BGA ICs

MaxiFLOW™ heatsink design features a low profile, spread fin array that maximizes surface area for more effective convection (air) cooling.

Omnidirectional air flow for optimum thermal performance independent of PCB layout.

Heatsinks provide engineers a base LED heatsink platform

Offers extremely low power consumption and operates over a wide single- or dual-supply range.

35% lower RDS(on) and 45% lower Figure of Merit (RDS(on) x Qg) compared to alternative devices.

Automotive Switch Modules offer smart high side switching for bulbs, Xenon-HID, and LEDs.

Suitable for use in any application that already has a USB controller but requires a ULPI transceiver.

Eliminates the lead frame wire bond to give the chip top-bottom symmetry for fewer mounting problems, better heat transfer, and current handling capability.

Available in 2700K-6500K CCT, w/ minimum 80 CRI, for distributed light source applications.

Bourns’ smallest size resettable fuse to use high temperature PTC material. Features freeXpansion™ technology to increase performance.

Limitless Single Switch Adapter converts almost any electromechanical switch with low-energy contacts into a wireless switch.

Provides everything needed to start designing Atmel MCU-based applications in minutes.

Littelfuse PICO® 259-UL913 Series is the only fuse approved under the UL 913 standard for Intrinsically Safe Electrical Equipment to operate in hazardous locations.

Features a hybrid design with power contacts and signal contacts that provide power connections and signal control up to 300 Amps between power storage batteries.

ESD capability offering high current density with forward currents of 2 A and 3 A in the low-profile, surface-mount SlimSMA DO-221AC package.

16-bit DAC with two-buffer SPI interface.

AEC-Q200 rated MLCCs that offer a guaranteed higher level of reliability.

Motor control evaluation kit featuring RM48 32-bit RISC Cortex™-R4F MCU.

Available in three models, all with standard quarter brick footprints.

Capable of interrupting high-voltage, high-current loads for automotive applications.

Features G120 Module core, runs .NET Micro Framework, & available in 2 versions: Eco or WiFi-enabled.

Perfect solution for applications defined by circular aperture, featuring photonic lattice technology & low thermal resistance.

Meets the stringent requirements of the FDA and EHEDG for use in Food & Beverage Production Industries. IP69K tested.

Now available in flame retardant ABS plastic and larger boxes.

Feature un-insulated barrels for a variety of stud sizes and wire sizes up to 6mm2.

Featuring Intel® Atom™, Core™, or Celeron® processor technology for ultra high CPU performance & high speed I/O.

Featuring Intel® Atom™, Core™, or Celeron® processor technology for ultra high CPU performance & high speed I/O.

State-of-the-art single epitaxial process, DTMOSIV which provides a 30% reduction in RDS(on).

Offers super low ESR and high ripple current capability with a long life.

Single-channel ESD protection devices in a small 0402 package.

Lighted switches with up to four integrated LEDs available for a wide range of background and function illumination options.

Provides Bluetooth functionality to TI MSP430 & Stellaris® dev kit, & plugs directly into TI MSP-EXP430F5438 via adapter.

DOSA compliant, half-brick converters with conduction cooling.

Supports high-current charging with low voltage and low RDS(on) requirements.

Small, low profile, flexible LED holder that provides a quick and easy solderless connection to the CREE XLamp® CXA array.

Incorporate wire-wound components (magnetics) in standard RJ45 jacks to support support Fast Ethernet (10/100) and Gigabit Ethernet applications.

Encompasses both programmable and fixed function solutions, tailored to serve storage and other user-specific applications.

Full-featured evaluation platforms for the Atmel SAMA5Dxx embedded microprocessors.

Extends the advantages of transition mode to higher power ratings than previously possible.

Delivering high efficacy & high lumen output of 550 to over 5000lm in family of single, easy-to-use components.

Application-specific parallel-core processor for motor control that consists of an Advanced Motor Controller processor and a MCS®51-compatible MCU processor.

Ideally suited for fast-switching driving of power IGBTs and MOSFETs used in motor control inverter applications and high-performance power systems.

USB ports can now have both device and host capabilities.

Provides robust surge protection, excellent ESD capability, excellent clamping performance via extremely low dynamic resistance (0.35ohms), low capacitance of 2pF (I/O to GND).

Evaluation kit for the rapid development of the Atmel SAM4E microcontroller.

Fully-encapsulated step-down switching power supply that can deliver up to 100W from a 17mm square PCB footprint.

Industry's most flexible and scalable low-power mixed-signal architecture.

Offers high reliability with a space-saving design, available in 6 standard sizes from 18 to 96 contacts.

The Supertex HV9803 LED Driver IC is an open loop average-mode current control LED driver IC operating in a constant off-time mode.

Complete 802.11n WLAN RF front-end providing all the functionality of the PA, LNA, power detector, T/R switch, diplexers and associated matching.

Enables developers to add digital Class D audio capabilities to 32-bit SiM3U1xx Precision32™ MCUs.

Applications include photovoltaic power generation and storage battery system.

Includes HDMI modules capable of transmitting HD or 4K video including HDCP/EDID/CEC.

Higher capacitance FPCAPs with capacitance range from 10 to 560µF.

Ultra low power, high performance wireless microcontrollers supporting JenNet-IP, ZigBee PRO or RF4CE networking stacks.

Harsh Environment Connectors utilize a separate o-ring and meets NEMA 6P when mated.

Features short delays and high peak current to produce precise edges and rapid rise and fall times.

Ultra small high-side N-channel MOSFET driver with integrated charge pump.

Constant-frequency buck regulators featuring adaptive on-time control architecture.

Offers sealed connectors for exterior and under the hood applications and unsealed connectors to to simplify the assembly processes for mid-power harness applications.

Operates from 8 to 12GHz, providing a nominal gain of 20dB with excellent gain flatness.

Miniature 3.00mm (.118") pitch connectors that retain many of the features found on larger power connectors and can carry up to 5.0A of current.

Provides fast, reliable connections using fine pitch 0.635mm ribbon cable without the use of special tooling.

3-axis ultra-low power accelerometer with tamper detection and tilt sensor.

Featuring NXP ARM Cortex-M0 LPC1115 MCU w/ 8kB SRAM, 64kB Flash, SSP, I²C, UART, ADC.

Functions as a companion chip to an embedded central processing unit (CPU) to free it from data-intensive operations.

WQVGA 480x272 TFT LCD w/ Cypress TrueTouch™ controller technology & Amulet GEM Graphical OS Chip™.

Automotive-grade MLCCs now available in 1kV, 2kV, and 3kV options.

Featuring AMD Geode™ LX800 0.9W processor, or Intel® Core™ i7 Processor w/ Mobile Intel QM57 Express Chipset.

Featuring AMD Geode™ LX800 0.9W processor, or Intel® Core™ i7 Processor w/ Mobile Intel QM57 Express Chipset.

Powered by CoreExpress-ECO Advanced COM module w/ Intel Atom Z510/Z530 processor, or AMD Geode LX800 processor.

Powered by CoreExpress-ECO Advanced COM module w/ Intel Atom Z510/Z530 processor, or AMD Geode LX800 processor.

Harsh environment, true-sealed connectors tested under submerged conditions. Operates from -40ºC to +105ºC; integral locking tabs to prevent accidental disengagement.

Provides lowest switching loss in-class & significantly higher switching frequencies, delivering world-class efficiency.

Offers a very wide input operating voltage range of up to 120V DC and supply an output current of up to 25mA or 50mA.

75V/4A device featuring unique adaptive on-time control architecture.

2.5 Amp R²Coupler™ features fast propagation delay with excellent timing skew performance.

Single-chip 10/100/1000Mbps IEEE 802.3 compliant Ethernet transceiver.

Provides highly efficient noise suppression for sensitive data and image capturing systems.

Complete distributed power systems of rectifier modules in a 1U package for end-applications needs.

Low-power, full binary-coded decimal clock/calendar plus 56 bytes of NV RAM.

Drives ERM and LRA actuators and features LRA auto-resonance detection.

Protect sensitive electronics from damage caused by voltage transients and reverse bias

Provides a fully functional buck regulator employing the COT operating principle.

Includes new pressure ranges, new electrical connectors, and new standard cable lengths.

Premium-grade capacitors ideally suited for first-class audio equipment

Small, low profile, flexible LED holder provides a quick and easy solderless connection to the CITIZEN ELECTRONICS CO. CLL array family.

Meets the demand for high powered, high current connectors  for industrial applications. Snaps directly onto a standard 35mm DIN Rail.

Proven & reliable code generation, compact code, & high performance for ARM7 & 9, Cortex-M, -R, & -A projects.

Features non-contacting magnetic technology and dual ball bearings.

Available in surface mount and through-hole form factors designed for use in all types of electronic equipment

New addition to the FPCAP product line, offering low ESR and wide capacitance range

Designed specifically for general ESD protection of I/O gates

Small, low profile, flexible LED holder provides a quick and easy solderless connection to the OSRAM Opto SOLARIQ™ LED array.

Approved to EN/IEC/UL60601-1, 3rd edition, and complies with MOPP requirements for medical applications.

Offers very stable, High Q and low loss performance in systems below 3GHz.

Integrates a synchronous buck gate driver, benchmark figure-of-merit control, and synchronous MOSFETs and Schottky diode into a low profile package.

Compact, unsealed connectors for use in mid-power (14 to 22 AWG wire) transportation applications. Overall 37% space savings over traditional USCAR 1.500mm connectors.

Eliminate the need for PCB vias or coaxial cables when RF signal and DC supply voltage lines cross.

Spring-cage, light touch lever for easy connection and release. Provides an ideal solution for high power needs to the PCB using an angled or horizontal design.

Small, low profile, flexible LED holder provides a quick and easy solderless connection to the Bridgelux ES & LS array series.

Drives one DC motor or one winding of a stepper motor.

DC high capacity power PhotoMOS in a 4-pin SIL package.

Advanced, high-performance clock-frequency synthesizers.

Provides 150 watts of output power with typical efficiency of 88% at 115Vac.

125W constant current LED Drivers for outdoor lighting.

Industry's first solution for compliance to EMC regulations.

Newly patented antiferroelectric ceramic technology offers a 20µF capacitance & 400Vdc voltage rating.

Feature scalable multicore ARM Cortex-A9 processors which include single, dual, and quadcore families.

Chip type capacitors with 3.0mmL height, designed for surface mounting on high density PC boards.

Offers excellent temperature stability and output handling capability.

Features integrated headphone amplifiers and PowerTune™ capabilities.

Dual color LEDs feature standard SMD 1210 footprint & compact size, & are available w/ various output options.

Low impedance capacitors that offer high temperature reflow soldering up to 260ºC

Development platform that enables rapid prototyping and tool re-use through reconfigurable hardware.

Enhanced speakerphone IC that enables full-duplex conversation using echo cancellation and suppression in a single-chip solution.

System-on-chip combining integrated Hall elements, analog front-end, & digital signal processing in single device.

Kit for the Kinetis K10, K20 and K60 120/150MHz 32-bit ARM® Cortex™-M4 MCUs featuring the Kinetis MK60FN1M0VMD12 low-power MCU.

Manufactured with a nanocrystalline material that achieves high permeability levels.

Utilize field detector technology that improves sensor accuracy and linear performance

Offers higher permeability when compared to ferrite common mode chokes.

Provides high SNR and a wide dynamic range.

Emits directly to air, enabling use of proximity optics for color mixing & elimination of color fringing.

Microcontroller board based on the Atmel ATmega32u4.

Ultralow-noise LDO capable of sourcing a 1A load.

Linx Technologies µSP Series MicroSplatch Antennas are embedded quarter-wave chips available in the 403MHz, 418MHz, 433MHz, 868MHz, 916MHz and 2.4GHz bands.

Industry's first quad SPI/I2C UART.

Various daughter cards & adapter boards designed to expand capabilities of Terasic's FPGA development kits.

Including DE2-115 kit w/ Cyclone IV EP4CE115, VEEK-MT & INK kits based on DE2-115, & DE0-Nano w/ Cyclone IV EP4CE22F17C6N.

Powered by high density, high performance Altera Stratix® III EP3SL150, EP3SE260, & EP3SL340 FPGAs.

Highly integrated multi-channel low-power HD Audio Codec.

Boosted 2.2W Class D audio amplifier with automatic level control.

Low cost & ultra small, for applications where both Bluetooth classic & Bluetooth low energy connectivity are needed.

Small form factor, low power, features 802.11 b/g/n and Bluetooth® 4.0.

OPA313 Op Amps offer single-, dual-, and quad-channel op amps with rail-to-rail input and very low noise.

Kit for the Kinetis K10 and K20 50MHz 32-bit ARM® Cortex™-M4 MCUs and provides rapid prototyping.

Compatible byte and page writable Serial EEPROMs designed to provide simple, yet flexible data storage.

Provides two analog-to-digital and six digital-to-analog delta-sigma converters, as well as an integrated S/PDIF receiver.

Tower System kit featuring Kinetis K10, K20, 20 & K60 Series 120/150MHz 32-bit ARM® Cortex™-M4 MCUs.

High-performance enhanced haptic drive for mobile phone and other handheld devices.

World's smallest ARM powered MCU built on the ARM Cortex-M0+ processor with unparalleled energy-efficiency and feature integration.

Interfaces USB port on host computer to Altera FPGA mounted on printed circuit board via standard 10-pin header.

Low-cost, compact form, featuring fast Cortex A8 A13 MCU & increased mobility due to small size.

Designed for high-voltage boost applications in elevated temperature environments

Complete design environments including hardware & software for developing Arria II GX FPGA designs.

Creates an enhanced sound stage for portable multimedia devices.

3.0A LDO with an enable input and power-good output.

SMD-type capacitors that offer wide temperature range up to 105ºC.

Powered by Stratix IV GX EP4SGXx30 FPGAs, w/ greater bandwidth, improved jitter performance, & low power consumption.

Achieves excellent dynamic performance and improved tolerance to clock jitter.

Offer high air flow and back pressure while reducing power

Offer high current output up to 20A and variable voltage outputs up to 60V with CC and CV modes.

Allows for consistent soldering work on a variety of PCB thicknesses without the need for special fixtures.

Interface COM6L-T5 (TiWi5) & COM6L-BLE (TiWi-BLE) adapter cards to BeagleBoard & BeagleBoard-xM platforms.

Combines the power and performance of a power analog-based controller with the flexibility of a digitally-enhanced interface.

Designed for lithium-ion battery protection circuits and mobile phone power management switches.

1-piece integrated design that maintains rear seal at approximately 50% lower cost than many industry connector/backshells. Requires no field service.

Offer high temperature reflow soldering at 260ºC

Contain a selection of high-power chip resistors and terminations with 50Ohm and 100Ohm values.

Various experiment input & output boards which can be used w/ MR-BusIO-MAIN board or as stand-alone.

Various miniature modules & boards which can connect to existing microcontroller boards.

Features advanced and flexible features, such as uniform block-erase architecture.

Feature-rich, page erase Serial Flash with advanced protection and security.

DE1 & DE2 w/ Cyclone II EP2C20 & EP2C35 FPGAs for advanced design prototyping in multimedia, storage, & networking.

Power Management & Thermal Management Exp Kits for Cypress CY8CKIT-001 & CY8CKIT-030, & CapSense CY8CMBR2016 Eval Kit.

Power management IC designed for use with i.MX6 applications processors.

Features two 70mΩ MOSFETs for 3A continuous output current.

Self-contained wireless solution featuring LSR TiWi-SL SimpleLink Wi-Fi module.

The OPA2180 operational amplifiers use zero-drift techniques to simultaneously provide low offset voltage (75 µV), and near zero-drift over time and temperature.

Feature distributed constant type LC filter, prevents ringing caused by circuit impedance, stable noise attenuation over wide frequency range, small and low profile. 

High-performance zero-voltage switching (ZVS) full-bridge PWM controller.

Provide current capability of up to 10A per individual PCB pin and an ultra low contact resistance of only 100-200µOhms.

Offers 10 X faster data transfer rate over Hi-Speed USB with a 5Gbps signaling rate.

Designed especially for HF601 connector family with a secure tab design for precise mating. Provides reliable signal performance and great transmission stability.

Supplied with wrap-around terminations that have excellent leach resistance properties and solderability

Offers low profile and optional industry standard connector or over-molded interface for design freedom over junction box position and cable assembly length. UL 600V Approved.

Buck controller featuring emulated peak current mode control.

Intended for driving resistive or inductive loads with one side connected to ground.

Meets IEC 606691 and features higher inrush capability.

Accept a 36 to 75 Volt DC input voltage range (48 VDC nominal) and converts it to a fixed 12Vdc output.

Wide input voltage range of 4.5 to 14Vdc

Single-channel adaptive equalizer for 960H (WD1) or 720H (D1) composite video.

System-level SoC solution with MCU, memory, analog, and digital peripheral functions in a single chip.

Operating temperature range of -40º C - 105º C, storage temperature range of -40º C - 105º C, and solder reflow temperature peak of 260º C.

Designed to isolate photovoltaic module strings for maintenance, meets 1000V UL requirements.

Only process in the world that works with true optical compensation.

First in the next generation of EPC Class 1 Gen2 RFID Reader ICs.

Utilize M/A-COM Tech’s HMIC diode process for guaranteed consistent performance.

Advanced dual-channel, dual-simplex retimer for active copper cable applications.

Integrated Power Management IC for TFT-LCDs used in central display, rear seat entertainment and virtual dashboards.

Automotive-qualified IC for high-speed driving of MOSFETs and IGBTs up to 600V.

Features a P-channel high-side MOSFET, an N-channel low-side MOSFET and control IC in one package.

Controlled impedance, crosstalk limiting contact design supports speeds up to 15 Gbps / 25 Gbps.

Supported by a highly flexible digital audio interface, reducing the need for an external MCLK signal.

Small, complete, breadboard-friendly surface mount embedded version w/ integrated USB, based on ATmega328.

Small, complete, breadboard-friendly surface mount embedded version w/ integrated USB, based on ATmega328.

Boards that easily plug into the Arduino PCB to extend its capabilities.

Approved for both medical and ITE applications. Includes 5V +/-15V and 5V +24V/12V versions.

Provides ultra low quiescent current step down DC/DC converters with integrated power MOSFET.

Ultra-low RDS(on) to improve system efficiency and reduce part count where multiple MOSFETs are used in parallel.

Battery management ICs that address the needs of handheld devices, Mobile Internet Devices (MIDs), laptops, power tools, and many others.

Single-channel precision adjustable current-limited switches.

Reduces field assembly time. Designed to handle high voltage requirements (maximum voltage 1,000V TUV). Ideal for high output PV panel modules.

Feature distributed constant type LC filter, prevents ringing caused by circuit impedance, and offers stable noise attenuation over wide frequency range.

Evaluate LED Driver products that propose a solution for low-line voltage LED ballast.

Feature 0402 size, rated current up to 2A max, and are effective for filtering noise on power (Vcc) lines.

Provides an innovative, highly flexible test and burn-in solution.

12-bit ADC that also functions as a high-accuracy temperature sensor.

Single output, convection cooled power supply with 85-265VAC universal input

Offer low ESR (7mΩ) at a high frequency range.

Including various communication & input modules designed to work w/ Arduino Nano 3.0 w/ ATMEGA328.

Various accessory & converter modules which connect to existing microcontroller boards via I²C.

Adapter & converter boards for adding several kinds of connections & interfaces to existing microcontroller boards.

Various MCU test/interface boards offering debugging & testing capabilities, which connect directly w/ 10PIN MRconnect.

Various modules & cables designed to work w/ plug-n-play Netduino Go open source electronics platform & starter kit.

Adds MicroSD storage, Ethernet jack for fast integrated IP networking, & increased speed, code space, & RAM.

Plug-n-play component set w/ Arduino shield compatibility, 168MHz speed, 384KB of code space, & 100KB+ of RAM.

Uses .NET Micro Framework; featuring 32-bit MCU, 3x the speed (120MHz) & 50% more code space (192KB) than original Netduino.

Silicon Microstructures SM5852 Ultra-Low Pressure Sensor combines pressure sensor technology with CMOS mixed signal processing to produce an amplified, fully conditioned, multi-order pressure and temperature compensated sensor in a DIP-8 package.

Silicon Microstructures SM5882 Pressure Sensors feature a dedicated custom signal conditioning ASIC combined on a single die which minimizes the size and simplifies the use of silicon micromachined pressure sensors.

28 nm FPGAs providing the industry's lowest system cost and power.

Features wide input voltage range of 3V to 17V.

Glue-mounted instead of solder-mounted for high reliability in high temperature environments.

Delivering 2.5x lumens of existing LZ4 with same 7 x 7mm footprint; secondary TIR lenses in spot, narrow flood, & flood beams.

Intersil ISL26102 and ISL26104 analog to digital converters are 24-bit Delta-Sigma ADCs with 2ch (ISL26102) or 4ch (ISL26104) differential, multiplexed inputs.

1st field installable PV connectors that accept 8 gauge wire, TUV-certified to 1500V, and UL approved for use up to 1000V.

AVX offers several Commercial-over-the-Shelf (COTS) Capacitor series.

Dual channel H-bridge drivers can control microstepping bipolar stepping motors.

High-performance embedded PCs featuring AMD's powerful yet efficient Geode™ LX processor.

High-performance embedded PCs featuring AMD's powerful yet efficient Geode™ LX processor.

Based on Intel® Atom™ CPU & 945GSE chipset, ideal for migrating legacy EBX systems to latest lowest-power Atom™ platform.

Based on Intel® Atom™ CPU & 945GSE chipset, ideal for migrating legacy EBX systems to latest lowest-power Atom™ platform.

DDS function generators with sine and square waveforms up to 20 MHz.

Micro-modules that drive maximum 450mA LED current up to 16 LEDs in a single string (max 23W).

Responds at high speed and minimizes output voltage changes during sudden load current changes.

Achieves an industry-leading thickness of only 0.57mm.

Allows the operation of two hand-pieces at the same time.

Hardware and software solution that fuses accelerometer, magnetometer and gyroscope data.

Drop-in replacement for LT2510, offering same range w/ decreased current consumption & new features.

High capacitance series from Nichicon's FPCAP product line

Drives external MOSFET with PWM to control solenoid current.

Motor control eval kit featuring TMS570LS31 Hercules Safety MCU.

Modulates any signal from 20 - 60 kHz, and could replace up to 17 discrete components.

Hardware solutions and tools to accelerate the FPGA design process.

Integrated motor driver solution for battery-powered devices and motion control applications.

First DC-DC converter with input voltage range greater than 10:1.

Stereo audio codec with digital microphone inputs and programmable outputs.

FFC Harnesses for high-speed differential transmission.

Motor control eval kit featuring a DRV8312 base board and C2000 F28035 controlCARD.

Send/receive data in 902-928MHz band up to 3000 feet (line of sight) w/ True Transparency™ interface.

0.30mm pitch SMT cable connector provides easy insertion and a stable connection.

18V models are now available.

The most compact, slimmest multifunction DIN rail solid state output timer.

Tested & binned at 700mA for quality, reliability, & use in high lumen applications & more energy efficient devices.

Compact, dual-contact FPC connector eliminates the need for different top & bottom mount connectors. Offers narrowest depth (2.85mm) of any Molex 0.30mm pitch version.

12V & 6V illumination grade LEDs deliver high efficacy & flux density for indoor, outdoor, & industrial applications.

CN121 connector components fully compliant with CFP MSA's CFP2 design specification

Illumination Grade LED light sources offer exceptional color control & highest possible efficacy & light output.

Industry's best lumen maintenance, superior reliability, & reduced CO2 emissions in the most widely used power LEDs today.

Featuring leading light output, color stability, flux density, & clear saturated colors to create superior high quality light.

Extraordinarily small, un-domed, power LEDs in colors from 440nm to 670nm & 4000K white.

Deliver superior lumen density, color performance, & reliability in high voltage LED-on-board architecture.

Deliver highest quality of light w/ industry leading punch to enable high center beam intensity, uniformity, & sharp shadows.

Featuring Freedom from Binning™, which allows system optimization for highest possible efficacy, flexibility, & color consistency.

Freedom From Binning™ w/ single 5 step MacAdam ellipse for confidence in color consistency in outdoor & industrial lighting.

Superior quality of light, light output, & real world efficacy enable leading performance & efficient solution development.

Featuring high flux/radiometric power & small, easy-to-use bolt down package for simple design & quick solution development.

Provide RGBC light sensing to detect color chromaticity & illuminance of ambient light w/ output in 16-bit resolution.

IP68 rated switches that have 25A 12Vdc ratings

MEMS technology, low power consumption, and excellent shock and vibration immunity.

Includes zero-cross turn-on circuitry and a blocking voltage of 800 VP.

Solar devices offering 500V voltage and 6000 hours useful life at maximum temperature of 105ºC.

High reliability Commercial-over-the-shelf (COTS)-Plus series.

Use an internal multi-anode design to achieve ultra-low ESR.

Low impedance SMD capacitors with temperature range up to 105ºC

Offers 2.4 and 5.8 GHz WLANs plus Bluetooth functionality in a small, FCC/IC certified module.

Unique, flameproof design.

Improved thermal characteristics and lower Figures of Merit (Qc x Vf).

Offers high voltage of 5.5V.

Ground breaking combination of ultra-low power coupled with a highly sophisticated feature set.

Supports data rates up to 6Gbps.

Industry's most highly integrated Qi-certified wireless power transmitter.

Suitable to obtain the ambient light data for adjusting LCD backlight power of a TV or mobile phone.

Magnetic switches that can operate both S- and N-pole, upon which the output goes from Hi to Low.

Provides direct conductor connection using CLIPLINE advantages and no tools. Enables designers to terminate 6mm² stranded or ferruled wire.

Bi-directional with a working voltage up to VRWM = ±24 V, low capacitance, and very low reverse current.

ARM926™ processor-based MCUs with secure boot and a hardware cryptographic engine.

Feature stacked assemblies of capacitors that provide ultra low ESR.

Low voltage, low on-resistance protection switches guarding against high transient voltages and component damage.

Offer the industry’s highest surge energy ratings from 2W to 7W sizes.

Accepts any solid or stranded wire between 18AWG and 26AWG.

100% recyclable and rated for 1 million flex cycles.

Surface temperature sensors with a low thermal mass and rapid response time down to 2s.

Widescreen 7" TFT display allows more of the signal under test to be seen.

Provides easy access to energy harvesting technologies for design of future batteryless products.

PIC32-based dev board supported by MTCH6301 cap touch controller.

Offers the lowest-profile and narrowest width of any similar version in the market for applications such as thin LED TVs.

Plug-and-play, providing quick & easy Ethernet connectivity to virtually any device or machine w/ serial interface.

Electrolytic capacitors that offer self-healing and low impedance

250W compact high density components that deliver high efficiency up to 94%.

High temperature tolerant (-25 to +85ºC and highly reliable.

Long range, long battery life, low power wireless transceiver w/ powerful multipoint-to-multipoint frequency protocol controller.

Highly-integrated switch-mode charge management and system power path management devices.

Include designs for railway, hazardous, and harsh environment applications.

Available in 7 sizes.

Provides reinforced insulation power supply for RS485 and RS232 transceiver ICs.

Featuring power dissipation of 120mW & benefits of solid-state LED technology for reliable & stable performance.

Development Tools to help with the design phase of the MMA8491Q 3-Axis Accelerometer.

Featuring 17.5W power rating, saving energy by up to 50% & improving compatibility w/ phase cut & analog dimmers.

Provides Class AB audio performance with Class D efficiency, with five selectable gain settings available

Provides GPIO expansion for most microprocessor families, saving microprocessor GPIOs for critical functions.

Super-sensitive infrared temperature sensor that makes full use of Omron's proprietary MEMS sensing technology.

Offers high voltage of 5.5V.

RN41XV Class 1 Bluetooth module is based on RN41, & RN42XV Class 2 Bluetooth module is based on RN42.

30 micron gold-plated version delivers greater vertical space and power savings for ATCA blade systems and other networking devices using high-density memory modules.

Including 64-CH & 128-CH isolated digital input/output peripheral component interconnect cards.

Miniature ARM® Cortex™-M4 dev board w/ LX4F230H5QR MCU, pin-compatible w/ PIC16F887 & PIC18(L)F45K20.

Offers maximum PCB & vertical space-savings with anti-short and polarized card-insertion features.

Now available in an 8 Gb version.

Designed with precision-machined gold-plated contacts, tested to a minimum of 50G shock and 10G vibration with no spikes.

Provides a flexible, quick and easy-to-use circuit board connection up to 60A.

The DRV8313 triple half-H-bridge driver provides three individually controllable half-H-bridge drivers.

1st to offer Phoenix Contact's Push-In Technology for use in test, measurement, and maintenance of equipment.

Miniature ARM® Cortex™-M4 dev board w/ STM32F415RG MCU, pin-compatible w/ PIC16F887 & PIC18(L)F45K20.

Including 8-CH, 16-CH, 24-CH, 32-CH, 48-CH, & 96-CH digital input/output PCI cards.

Inspired LED RGB flexstrip controllers determine the color and brightness of RGB flexstrips.

RGB flexstrip interface and connector options are available for connecting RGB LED controllers to RGB flexstrips.

Fast response for fluid immersion applications; sensor maintains permanent contact with water or liquids; reduced thermal gradient.

Features the compact SOD882 package, low dynamic resistance, enhanced ESD capability, and low leakage current of 0.1uA @ 5V.

Extremely small high reliability receptacles with an overmold design for splash resistance.

Common bus power trace, locations for resistors to control individual LEDS, prototyping area for drivers, and locations for other components.

Offers low EMI noise and small footprint using inductor-embedded ferrite substrate

Smallest package (0201) available on the market for this type of product.

Class D audio Amp Reference Designs feature the IRS2092 protected digital audio driver.

Designed to help the engineer select the perfect component for their application.

PCA9551 offers unique blink modes, and PCA9632 offers color mixing support in various modes.

Simple and easy to use high power, current-sharing DC/DC power module.

Features 5.2kVDC isolation voltage in a 7 pin SIP package.

Brightest, smallest multi-colored LEDs of their class, delivering red, green, royal-blue, & white in 1 LED.

Provides current excitation for RTD temp sensors and bridges.

Allows signal, high current & high voltage in one connector.

Provides comparison of 9 LEDs from XLamp ML-B Series w/ color temperatures ranging from 2200K - 7000K.

Available in one- & two-piece versions for next-generation, energy-efficient Citizen CLL010 - CLL050 arrays.

Consumes 500x lower quiescent current than the traditional 1117 voltage regulator.

Feature rapid prototyping of microwave circuits, SMA female connectors, ground terminal and bias feed-through, and are compatible with all MB series circuit boards.

Intersil ISL21090 voltage reference IC is a ultra low noise, high DC accuracy precision voltage reference.

Ideal for applications with space constraints.

General purpose High-Voltage ICs designed for high reliability and ruggedness in consumer applications.

Offers low EMI noise and small footprint using an inductor-embedded ferrite substrate.

AMM20B non-contacting multiturn rotary position sensor is designed for heavy-duty applications.

World's smallest 1.8A brushed DC motor driver.

Allows configuring of the LMP91200 through a 3-wire SPI interface and testing the device with a real pH probe.

Highly reliable DC/DC step-down regulators with voltage control system.

EL5120T operational amplifiers are high voltage rail-to-rail input-output op amps with low power consumption.

Uses standard surface-mount components and can be turned into functional circuits in a matter of minutes.

Smallest package (0201/DFN0603) in the market for this type of product.

Designed with precision-machined gold-plated contacts, tested to a minimum of 50G shock and 10G vibration with no spikes, and available in .155mm pin length version.

The ISL29044 ambient light and proximity sensor features an integrated ambient and infrared light-to-digital converter.

Ultracapacitor module rated for 160V and 5.8F Capacitance.

Offers maximum PCB & vertical space-savings with anti-short and polarized card-insertion features.

Long range, long battery life, low power wireless transceiver w/ powerful multipoint-to-multipoint protocol controller.

Including hot swappable buffer & monolithic CMOS buffer ICs for I²C-bus, SMBus, DDC, PMBus, etc.

Hardware solutions and tools to accelerate the FPGA design process.

Lowest-cost, lowest-power FPGAs, including a transceiver variant.

Lowest power for 6-gigabits per second (Gbps) and 10-Gbps applications, to the highest mid-range FPGA bandwidth 12.5 Gbps transceivers.

Offers an unprecedented combination of low power, high functionality, and low cost and includes the LS variant with security features.

Delivers substantial cost and power savings over competing devices, while providing high functionality for 6G transceiver-based applications.

Industry's highest bandwidth, highest level of system integration, and ultimate flexibility with reduced cost and the lowest total power for high-end applications.

Delivers high-performance, state-of-the-art products to market faster with lower risk and higher productivity.

Designed for cost- and power-sensitive transceiver-based and embedded applications.

High-end FPGA families, combined with an architecture tuned for high performance and the highest level of integration available.

Offers robust features at 50% lower total power than competing CPLDs.

Delivers the lowest power and the lowest cost per I/O pin of any CPLD family.

Cost-optimized, EEPROM-based CPLDs with instant-on capability.

Lowest power, lowest cost CPLDs, including MAX V devices that provide robust new features at lower total power.

Implement your high-density logic design and get high performance and great signal integrity in the most efficient device possible.

World's highest performance and highest density 65-nm FPGA combined with the lowest possible power consumption.

Delivers a breakthrough level of system bandwidth and power efficiency for high-end applications, allowing you to innovate without compromise.

90 nm FPGAs delivering high performance and low power at a cost that rivals ASICs.

Multi-platform design environment that easily adapts to your specific needs in all phases of FPGA and CPLD design.

FPGA series designed for low-power, cost-sensitive design needs.

Available in several diagonal sizes from 1.44" to 4.3" w/ either GOLDELOX or PICASO graphics processor.

20W stereo Class-D audio amp with audio processing.

Feature low profile of 4mm, small footprint of 6 x 6 mm, and very low secondary RDC. 

Offering powerful graphics, text, image, animation, & more, plus all data & control signals are provided to interface directly to display.

Featuring fully transparent 2.0" Passive Matrix Transparent OLED technology w/ GOLDELOX graphics processor.

Latest PMOLED technology w/ embedded GOLDELOX-GFX2 graphics processor & code in 4DGL--high level 4D Graphics Language.

For bidirectional voltage translations btwn 1-5V w/out need for direction pin in open-drain or push-pull apps.

12-bit ADC fully specified over a sample rate range of 500 ksps to 1 Msps.

Suitable for driving high brightness LED’s in LED Lighting applications.

Network magnetics combined with RJ 45 modular jack connectors.

Innovative power devices, which are "Super-High" current gain SiC BJTs with up to 1700 V ratings.

Blocks high voltages, isolates grounds, and prevent noise currents from damaging sensitive circuitry.

MICRO SWITCH™ Basic and Limit Switches expanded product line from Honeywell are now available at Mouser.

Protects I/O ports on HDMI 1.3, portable video players, LCD & plasma TVs, USB 2.0, digital visual interface (DVI), and antenna switches.

Low-power, low-noise accelerometers that offer a wide range of performance for portable devices.

Complete digital interface for concurrent transmission of high-speed video, audio, and control data.

MSP430 MCUs with three high-performance 24-bit sigma-delta A/D converters and a 10-bit ADC.

Achieves 90% power-supply efficiencies with double the frequency.

Highly efficient, compact solution reduces component count, shrinks PCB size, & simplifies Class D amplifier design.

Ideal for low power mains applications.

Single- and dual-channel op amps with low quiescent current of only 1.45mA.

Features low leakage current (≤ 300µA at 264VAC) making it suitable for patient-contact equipment.

Ideal for use in personal and portable computer CPU power supplies, digital amplifiers in car audio, home theaters, and large LCD’s.

DIN rail mount boxes with PCBs, terminal connectors, and DIN rails.

Integrated overcurrent/overvoltage protection devices incorporate PolySwitch PPTC & metal oxide varistor technology in a single device.

Extremely small, high reliability connectors designed to comply with physical, electrical and environmental requirements of Micro-USB standard (USB 2.0).

Extensive device library with over 70,000 devices.

Actively switches the battery power source off if it drops to a set threshold.

Provide easy way of interfacing 4DGL-platform OLED & LCD display modules to Arduino compatible boards.

Optimized for low power consumption, w/ alarm & timer functions & backup battery switch-over circuit.

Including multiplexer switches for DisplayPort Gen1/2/3, PCI Express Gen2/3, or DDR2/DDR3 memory bus systems.

Single-channel, w/ data rates up to 5Mbit/s & enhanced UART functions w/ FIFOs & IrDA support.

Small surface mount case size of 3.2 mm. x 2.5 mm.