Contact Mouser (USA)  (800) 346-6873     |     Feedback        
View Cart     |     Change Location  USD
United States United States

Please confirm your currency selection:

US Dollars
Home » NEWEST Products » New by Manufacturer » TE Connectivity / CII » TE Connectivity High Performance Relays
NEWEST Products

TE Connectivity Logo
TE Connectivity / CII
High Performance Relays
Meets stringent aerospace and defense specs

TE Connectivity / CII High Performance Relays are designed for demanding, high-performance applications. TE's relays and contactors meet stringent aerospace and defense specs in the most extreme environments. TE's High Performance Relays can switch currents from dry circuits to more than 1000 amps, voltages up to 70kV and frequencies up to 6 GHz.

TE Connectivity 150 Grid-Space Micro-miniature Relays

The TE Connectivity 150 Grid-Space Micro-Miniature Relays , 3SBC and 3SBH , are only 0.32 inches high to save space in electronic packaging. The pin spacing allows relay insertion with no intermediate pin spreaders. The relays meet military specifications.

Tyco Electronics 150 Grid-Space Micro-miniature Relays

View Products List

Datasheet

Key Features
  • Low profile - only 0.32 inches high
  • Internal diode for coil transient suppression and transistor driven models available
  • MIL-R-39016/13
  • RF designs available
Performance Specifications
  • Contact Ratings :
    • DC resistive - 2 amps at 28 volts (50,000 operations), 1 amp at 28 volts (100,000) operations
    • DC inductive - 0.5 amps at 28 volts, 200 mH
    • AC resistive - 0.5 amps at 115 volts
    • Low level - 50 µA at 50 mV peak AC or DC
    • AC - 0.125 amps at 115 volts (case grounded)
  • Contact Resistance : 0.050 ohms max., 150 ohms after life test
  • Life : 100,000 operations at rated loads listed, 1,000,000 operations at low-level loads
  • Operate Time : 4 ms max.
  • Release Time : 4 ms max.
  • Bounce : 1.5 millisecond
  • Dielectric Strength :
    • 500 volts rms at sea level
    • 350 volts rms at 70,000 feet and above
  • Insulation Resistance : 1000 megohms min. over temperature range
  • Vibration : 30 G to 3000 Hz
  • Shock : 100 G at 11 ms
  • Temperature : -65°C to +125°C

TE Connectivity 07 Two-Pole 10 Amp Relays

TE Connectivity ' 07 Two-Pole 10 Amp Relays are high-performance and qualified to MIL-R-5757/23 and MS 27245 and MS27247. The 07 Series is hermetically sealed and offers up to 10 Amps switching and DC, AC, and diode-suppressed coils. Shock and vibration ratings are available with optional terminals and mounting styles.

Tyco Electronics 07 Two-Pole 10 Amp relay

View Products List

Datasheet

Key Features
  • Hermetically sealed
  • Up to 10 amps switching
  • High shock & vibration ratings
  • Optional terminals & mounting styles
  • DC, AC & diode-suppressed coils
Electrical Characteristics
  • Contact Arrangement : 2 Form C (DPDT)
  • Contact Material :
    • Stationary: Silver cadmium oxide
    • Moveable: Silver cadmium oxide
  • Contact Resistance :
    • Before Life: 10 milliohms max.
    • After life: 20 milliohms max. (Measured at 10 A @ 28 Vdc)
  • Mechanical Life Expectancy : 1 million operations
  • Coil Voltage : 6 to 120 Vdc, 115 Vac
  • Coil Power : 4.3 watts max. @ 25°C
  • Duty Cycle : Continuous
  • Pick-up Voltage : Approximately 50% of nominal coil voltage
  • Pick-up Sensitivity : 565 mW

Contact Ratings*
Contact Load
Type Min.
Operations
10 A @ 28 Vdc Resistive 100000
3 A @ 115 V, 60 Hz Resistive 50000
5 A @ 115 V, 400 Hz Resistive 50000
6 A @ 28 Vdc Inductive 50000
2 A @ 115 V, 60 Hz Inductive 50000
2.5 A @115 V, 400 Hz Inductive 50000
1 A @ 28 Vdc Lamp 50000
0.5 A @ 115 V, 60 Hz Lamp 50000
0.8 A @ 115 V, 400 Hz Lamp 50000
3 A @ 28 Vdc Motor 50000
1.5 A @ 115 V, 60 Hz Motor 50000
3 A @ 115 V, 400 Hz Motor 50000
*All Ratings grounded case
Operating Characteristics
  • Timing :
    • Operate time:
      • Std: 10 ms max.
      • QPL: 15 ms max.
      • AC Coil: 15 ms max.
    • Release Time:
      • Std: 10 ms max.
      • QPL: 15 ms max.
      • AC Coil: 20 ms max.
  • Contact Bounce:
    • Std: 5 ms max. (N.O. and N.C.)
    • QPL: 2 ms max. (N.O.)
    • QPL: 5 ms max. (N.C.)
  • Dielectric Withstanding Voltage:
    • Between Open Contacts:
      500 Vrms 60 Hz
    • Between Adjacent Contacts:
      1000 Vrms 60 Hz
    • Between Contacts and Coil:
      1000 Vrms 60 Hz
  • Insulation Resistance : 1,000 megohms min. @ 500 Vdc
Environmental Characteristics
  • Temperature Range : -65°C TO +125°C
  • Weight : 1.3 oz (37 gms) max.
  • Vibration Resistance :
    • Standard: 30 G's, 10 to 2,000 Hz
    • QPL: 20 G's, 10 to 2,000 Hz
  • Shock Resistance : 100 G's, 6 ±1 ms
  • QPL Approval :
    • MIL-R-5757/23
    • MS 27245
    • MS 27247

TE Connectivity FCA Series Mid-Range

The TE Connectivity FCA Series Mid-Range Relay is a polarized single-side stable design, where the flux from a permanent magnet provides the armature holding force in the deactivated state, and its flux path is switched and combined with the coil flux in the operated state. This results in appreciably increased contact pressure in both states over that of a spring return nonpolar design.

Key Features
  • Hermetically sealed
  • All welded construction
  • Balanced force
  • Permanent magnet drive
  • QPL approved
  • Contacts: silver cadmium oxide
    with gold plating
  • Coils for DC and AC 50-400 Hz
    or 400 Hz


Contact Ratings
Ratings are continuous duty

FCA-210 10 Amps, DPDT

Type of
Load



Life (Min.) Cycles
x 10 3



28
VDC




400Hz 60Hz*
Resistive 100 10 10 10 2.5
Inductive 20
8 8 8 2.5
Motor 100
4 4 4 2.0
Lamp 100
2 2 2 1

FCA-410
10 Amps, 4PDT
Type of
Load

Life (Min.) Cycles
x 10 3

28
VDC

120VAC
400Hz
120/200VAC
400Hz-3Ø

120/200VAC
60Hz-3Ø*
Resistive 100 10 10 10 2.5
Inductive 20 8 8 8 2.5
Motor 100 4 4 4 2.0
Lamp 100 2 2 2 1.0

*
60 Hz loads rated for 10,000 operations



View Products List
Datasheet


Contact Ratings

Ratings are continuous duty

FCA-125 25 Amps, SPDT
Type of
Load

Life (Min.) Cycles
x 10 3

28
VDC

115VAC
400Hz
115VAC
60Hz
*
Resistive 50 25 25 10
Inductive 10 12 - 10
Inductive 20 - 15 -
Motor 50 10 10 8
Lamp 50 5 5 -

FCA-325 25 Amps, 3PDT
Type of Load Life (Min.) Cycles
x 10 3
28
VDC
115VAC
400Hz
115VAC
400Hz - 3Ø
115VAC
60Hz-3 Ø *
Resistive
50
25
25
25
2.5
Inductive 10
12
-
-
2.5
Inductive 20 -
15
15
-
Motor 50 10
10
10 2.0
Lamp 50 5
5
5 1.0

*
60 Hz loads rated for 10,000 operations


TE Connectivity FCB-205 5 AMP Relays

The TE Connectivity FCB-205 Series Relay is a polarized single-side stable design, where the flux from a permanent magnet provides the armature holding force in the deactivated state, and its flux path is switched and combined with the coil flux in the operated state. This results in appreciably increased contact pressure in both states over that of a spring return nonpolar design.

Tyco Electronics FCB-205 5 AMP Relay

View Products List

Datasheet

Key Features
  • QPL Approved to MIL-R-83536
  • Hermetically sealed
  • DPDT
  • All Welded Construction
  • Balanced Force
  • Permanent Magnet Drive
  • Contacts rated low level
  • To 5 AMPS 28 VDC and 115/200 VAC 400Hz, 3 phase
  • Weight .54 ounces Max (15.4 grams)
General Specifications
  • Temperature Rating : -70ºC to +125ºC
  • Altitude : 300,000 feet
  • Shock :*
    • Z, Y, & X Enclosures: 200g for 6mS
    • W & M Enclosures (Stud Mtg.): 100g for 6mS
    • T Enclosure (socket mounted in track): 50g for 11 mS
  • Vibration , Sinusoidal :*
    • Z, Y & X Enclosures: 0.12 DA 10 TO 70 Hz, 30 g 70-3000Hz
    • W & M Enclosures: 0.12 DA 10 TO 57 Hz, 20 g 57-3000Hz
    • T Enclosure in track: 0.06DA 10 TO 57 Hz, 10 g 57 TO 500 Hz, 20 g 500 TO 3000 Hz
  • Vibration , Random :*
    • Z, Y, & X Enclosures: 0.4g 2 /Hz 50-2000Hz
    • T, W & M Enclosures: 0.2g 2 /Hz 50-2000Hz
  • Dielectric Strength at Sea Level (all circuits to ground):
    • Circuit to Circuit: 1000 V rms
    • Coil to Ground: 1000 V rms
  • Dielectric Strength at 80,000 feet : 250 V rms
  • Insulation Resistance :
    • Initial (500VDC): 100MΩ Minimum
    • After Life or Environmental Tests: 50MΩ Minimum
  • Operate Time at Nominal Voltage : 4 ms or less
  • Release Time at Nominal Voltage : 4 ms or less
*Max. contact opening under vibration or shock 10 microseconds

Contact Ratings*
Type of Load
Life (Min.) Cycles x 10 3
28 VDC
115VAC, 400Hz
115/200VAC, 400Hz, 3Ø
Resistive 100 5 5 5
Inductive 20 3
5
5
Motor 100 2
3
3
Lamp 100 1
1
1
*60Hz Loads rated for 10,000 Operations
Overload Current 20Amps DC, 30 AMPS 400Hz
Rupture Current 25 AMPS DC, 40 AMPS 400Hz
Contact Make Bounce 1.0 Millisecond Max. at nominal voltage
Max. Contact Drop at 5 Amps; Initial 0.100 Volts
End of life 0.125 volts

TE Connectivity Half Size Relays

The TE Connectivity Half Size , high performance Relays are hermetically sealed, offer high shock and vibration ratings, and excellent RF switching. Optional terminals and mounting styles available.

HFW, HFW4A, HFW5A
Standard Half Size
Up to 5 Amps Switching
Qualified to MIL-R-39016/6
HMB
Bifilar Half Size
Up to 2 Amps Switching
Qualified to MIL-R-39016/22
HMS
Sensitive Half Size
Up to 2 Amps Switching
Qualified to MIL-R-39016/44
Terminal View Tyco Electronics HFW, HFW4A, HFW5A Series High Performance Relays - Standard Half Size

Terminal View Tyco Electronics HMB Series High Performance Relays - Bifilar Half Size

Terminal View Tyco Electronics HMS Series High Performance Relays - Sensitive Half Size

View Products List

View Products List

View Products List

Specifications for All Half Size Relays
Electrical Characteristics
  • Contact Arrangement : 2 Form C (DPDT)
  • Contact Material :
    • Stationary: Hardened silver alloy
    • Moveable: Gold-plated hardened silver alloy
  • Contact Resistance :
    • Before Life: 50 milliohms max.(Measured at 10 mA @ 6 Vdc)
    • After life: 100 milliohms max. (Measured at 2 A @ 28 Vdc)
  • Mechanical Life Expectancy : 50 million operations
  • Coil Voltage : 5 to 48 Vdc
  • Coil Power : 1.4 watts max. @ 25°C
  • Duty Cycle : Continuous
  • Pick-up Voltage : Approximately 50% of nominal coil voltage
  • Pick-up Sensitivity @ 25ºC :
    • 145 to 260 mW (HFW)
    • 325 mW (HMB)
    • 100 to 125 mW (HMS)
Environmental Characteristics
  • Temperature Range : -65°C TO +125°C
  • Weight : .46 oz (13 gms) max.
  • Vibration Resistance :
    • HFW/HMB/HMS: Standard - 20G's, 10 to 2,000Hz
    • HFW/HMB: QPL - 30 G's, 10 to 3,000Hz
    • HMS: QPL - 20 G's, 10 to 2,500Hz
  • Shock Resistance :
    • 100 G's, 6 ±1 ms
    • 50 G's, 11 ±1 ms (HMS)
  • QPL Approval :
    • MIL-R-39016/6 (HFW)
    • MIL-R-39016/22 (HMB)
    • MIL-R-39016/44 (HMS)
Operating Characteristics
  • Timing :
    • Operate time:
      • HFW: 4.0 ms max.
      • HMB: 5.0 ms max.
      • HMS: 6.0 ms max.
    • Release Time:
      • HFW: 4.0 ms max.
      • HMB/HMS: 5.0 ms max.
      • AC Coil: 20 ms max.
  • Contact Bounce : 2.0 mx max
  • Dielectric Withstanding Voltage:
    • Between Open Contacts:
      500 Vrms 60 Hz
    • Between Adjacent Contacts:
      1000 Vrms 60 Hz
    • Between Contacts and Coil:
      1000 Vrms 60 Hz
  • Insulation Resistance : 10,000 megohms min. @ 500 Vdc












  • TE Connectivity / CII
  • Electromechanical|Relays & I/O Modules