Contact Mouser (USA)  (800) 346-6873     |     Feedback        
View Cart     |     Change Location  USD
United States United States

Please confirm your currency selection:

US Dollars
Home » NEWEST Products » New by Manufacturer » Switchcraft » Switchcraft DC Power Jacks and Plugs
NEWEST Products
Switchcraft DC Power Jacks and Plugs

Switchcraft DC Power Jacks and Plugs

Switchcraft DC Power Jacks and Plugs offer a wide variety of options, including straight and right angle PC mounts, plastic or metal housings, red or black plugs, locking options, sealed options, and a variety of center pin sizes. Switchcraft DC Power Jacks and Plug pins come in diameters of 0.1"(2.5mm), 0.084(2.1mm), 0.08"(2mm), 0.05"(1.3mm), 0.04"(1mm), and 0.025"(0.65mm). High Amperage models are available with up to 11A current rating (carry) and available in locking and non locking, and sealed and non-sealed versions.

Switchcraft Sealed Power Jacks and Plugs

View Product List

Additional Resources

Switchcraft Sealed Power Jacks and Plugs

Sealed power plugs and jacks provide a great waterproof alternative to the standard power plug and jack. With an IP 68/ NEMA 250 (6P) rating this series of product is perfect for any type of environment. Pins are available in 0.1"(2.5mm) and 0.08"(2.0mm) sizes. Insulator color on jack tips are available in black or white.

Features:
  • IP66, IP67, IP68 / NEMA 250 (6P) when mated
  • Automatic switch over from AC to DC permitted by sleeve shunt spring
  • Split center pin shaped to hold mating plug firmly
  • Right Angle versions offer “kinked” PC terminals for board retention
Materials Specification
  • Housing: Rigid thermoplastic
  • Bushing: Plated copper alloy, with assembled & lubricated o-ring
  • Terminals: Plated copper alloy
  • Insulators: Rigid Thermoplastic
  • Hardware: Supplied with one nickel plated copper alloy hex nut (P1489), one nickel plated steel flat washer (P3031) and one o-ring for sealing jack to panel
Electrical Specification
  • Current Rating (carry): 5A, up to 30V DC at 65°C
  • Contact Resistance: 0.01 Ohms max (initial), 0.02
  • Ohms (after humidity, durability exposure), 0.10
  • Ohms max. (after salt spray)
  • Insulation Resistance: 10,000 Mohms min. (initial),
  • 1,000 Mohms (after humidity, durability exposure)
  • Dielectric Withstanding Voltage: 500VAC max.

Switchcraft Straight DC Power Jacks

Switchcraft Straight DC power jacks featuring threaded bushings to allow use of both standard and locking power plugs. The L versions of the power jacks have a longer bushing (0.319”)to accommodate thicker panel mount applications. Available in pin diameters of 0.100”(2.5mm), 0.080”(2.0mm), and 0.050”(1.3mm).

Material Specifications:
  • Housing: Thermoplastic
  • Bushing: Plated copper alloy
  • Terminals: Plated copper alloy
  • Insulators: Rigid Plastic
  • Hardware: Supplied with one P2439 nickel plated copper alloy hex nut, and one P2441 nickel plated steel flat washer
Electrical Specifications:
  • Current Rating: 5A, 12V DC resistive
  • Contact Resistance: 0.01 Ohms max. (initial),
  • 0.02 Ohms max. (after humidity, durability exposure),
  • 0.10 Ohms max. (after salt spray)
  • Insulation Resistance: 10,000 Mohms min. (initial),
  • 1,000 Mohms min. (after humidity, durability exposure)
  • Dielectric Withstanding Voltage: 500 VAC max.
Mechanical Specifications:
  • Lifecycles: 10,000 cycles min.
Switchcraft Right Angle DC Power Jacks

View Product List

Additional Resources

Switchcraft Right Angle DC Power Jacks

Switchcraft right angle DC locking power jacks allow right angle mounting to the PC board and offer threaded bushings to allow use of both standard and locking power plugs. The L versions of the new power jacks have a longer bushing (0.319”)to accommodate thicker panel mount applications. Available in pin diameters 0.100”(2.5mm), and 0.080”(2.0mm). Perfect for applications where the customer needs a locking feature, but cannot use a standard vertical PC mount jack.

Material Specifications
  • Housing: Molded plastic
  • Mounting Bushing and Hex Nut: Plated copper alloy
  • Pin, Spring and Terminals: Plated copper alloy
  • Insulators: Rigid plastic
  • Hardware: Supplied with one Number P2439 nickel-plated brass hex nut, and one Number P2441 nickel-plated steel flat washer
Electrical Specifications
  • Contact Resistance: .01 ohms maximum (initial) .02 ohms maximum (after humidity, durability exposure), .1 ohms maximum (after salt spray)
  • Insulation Resistance: 10,000 MW minimum (initial), 1,000 MW minimum (after humidity, durability exposure)
  • Dielectric Withstanding Voltage: 500V AC maximum
  • Contact Rating: 5A, 12V DC resistive.
Mechanical Specifications
  • Life: 10,000 insertion/withdrawal cycles minimum
  • Insertion/Withdrawal Forces: 3 pound maximum insertion, 4 ounce minimum withdrawal

Switchcraft Standard DC Power Plugs

Switchcraft Standard DC Power Plugs offer 2 conductor plugs in 0.1"(2.5mm) and 0.08"(2.03mm) pin sizes. Plug handles are available in black or white pin tips, black or red handles, and optional locking feature. Overall length is available as 1.42"(36.07mm) or 1.7"(43.18mm).

Features
  • 2-conductor power jacks.
  • Hollow center pin available in 3 pin diameters and 2 finger lengths (See chart below).
  • Locking option available for added security in critical applications.
  • Molded plastic handles available in black or red.
  • Sleeve terminal serves as cord clamp.
Specifications
  • Plug Sleeve and Pin: Nickel-plated copper alloy.
  • Lockring: Nickel-plated copper alloy.
  • Lockring Thread Size: 5/16 - 32 UNEF 2B.
  • Finger Insulator: Molded plastic.
  • Insulating Washers: Rigid plastic.
  • Sleeve Terminal: Copper alloy, electro-tinned.
  • Handle: Molded plastic.
  • Thread Size: 5/16 - 24 UNF 2B.
  • Electrical: Current (Carry): 5 amps.
Switchcraft Miniature DC Power Plugs

View Product List

Additional Resources

Switchcraft Miniature DC Power Plugs

Switchcraft miniature DC power plugs are available in the industry standard 0.084"(2.1mm) configuration. Plugs are offered in 1.42" and 1.7" overall length in either red or black handles, with a locking option available.

Features:
  • Part of Switchcraft’s 2-Conductor Power Plug Family
  • Industry standard 2.1mm configuration
  • For added security in critical applications, an optional locking ring is available
  • Molded plastic handles available in either black or red (other colors available)
  • Sleeve terminal serves as cord clamp
  • Fully compatible with Switchcraft mating power jacks (see chart on next page)
  • Ideal for attaching extra-low voltage devices, such as consumer electronicsequipment, to external power
Specifications
  • Plug Sleeve and Pin: Nickel-Plated Copper Alloy
  • Lock-Ring: Nickel-Plated Copper Alloy
  • Lock-Ring Thread Size: 5/16 - 32 UNEF 2B
  • Finger Insulator: Molded Plastic
  • Insulating Washers: Rigid Plastic
  • Sleeve Terminal: Electro-Tinned Copper Alloy
  • Handle: Molded Plastic
  • Handle Thread Size: 5/16 - 24 UNF 2B
  • Electrical: Carry Current - 5 Amps
Applications:
  • Consumer Electronics
  • Digital Cameras
  • Power Supplies
  • Digital Video Recorders
  • Personal Audio Equipment
  • GPS Automotive Navigation Systems

Switchcraft Right Angle PC Mount DC Power Jacks

Right angle DC power jacks for mounting on PC boards with a variety of center pin size options. Pin sizes include 0.10"(2.5mm), 0.08"(2mm), or 0.05"(1.3mm).

Materials Specifications
  • Housing: Thermoplastic
Electrical Specifications
  • Current Rating:
  • 3A: RAPC732OF, RAPC742, RAPC742OF, RASM742TR,
  • 5A: RAPC712, RASH712, RASM712, RAPC722, RASH722, RASM722, RAPC732, RASH732, RASM732
  • Contact Resistance: <50 mohms
  • Insulation Resistance: 100 mohms min.
  • Dielectric Withstanding Voltage: 250 VAC @ 1 minute
  • Switchcraft
  • Connectors|Connector-DC Power