|    Change Country Change Location USD
 
United States United States

Please confirm your currency selection:

US Dollars
Home » NEWEST Products » New by Manufacturer » STMicroelectronics » STM32 F4 Cortex-M4 MCUs by STMicroelectronics
NEWEST Products
STMicroelectronics STM32 F4 High-Performance MCUs

STMicroelectronics STM32 F4
High-Performance MCUs

STMicroelectronics STM32 F4 32-bit Cortex™-M4 Microcontrollers (MCUs) open the door to the digital signal controller (DSC) market with a family of devices that are pin-to-pin and software compatible with the STM32 F2 series but with better performance, DSP capability, more SRAM, and peripheral improvements such as full duplex I²S, less than 1μA RTC, and 2.4MSPS ADCs. STMicroelectronics STM32 F4 MCUs include a floating point unit and core features such as built-in single-cycle multiply-accumulate (MAC) instructions, optimized SIMD arithmetic, and saturating arithmetic instructions. The adaptive real-time ART Accelerator™ combined with STMicroelectronics 90 nm technology provides linear performance up to 168MHz, unleashing the full performance of the core. These features expand the number of addressable applications in the industrial, consumer, and healthcare segments. STM32 F4 series MCUs include devices with 512KB to 1MB of on-chip Flash memory, 192KB of SRAM, and 15 communication interfaces.

Features
Features

 
STMicroelectronics STEVAL-IDI001V1 Evaluation Board

Order STEVAL-IDI001V1 Evaluation Board View Product List

Additional Resources
Datasheet


STEVAL-IDI001V1 Evaluation Board

STMicroelectronics STEVAL-IDI001V1 Evaluation Board is based on the STM32F4 Microcontroller and a wide range of ST sensors. The STEVAL-IDI001V1 has a small form factor (4x4cm) and represents an integration of sensors and CPU for a "sensor hub like" application. The hardware is compatible with STM32Nucleo and X-NUCLEO expansion boards. The included adapter board is an expansion board that allows the interoperability between STEVAL-IDI001V1, STM32Nucleo and various X-NUCLEO expansions. Expansion boards can be connected either via Arduino or morpho connectors. The evaluation board comes with built-in data logging firmware. It allows streaming and storing of the selected sensor measurements via USB or via bluetooth low energy if an X-NUCLEO-IDB04A1 (or X-NUCLEO-IDB05A1) is plugged through the adapter board. The acquired data can be used to implement new advanced algorithms.


 

STM32 F4 Evaluation Modules

A complete development tool offering for the STMicroelectronics STM32 F4 series is available. The STM32F4DISCOVERY helps you to discover the STM32F4 high-performance features and to develop your applications easily. It includes everything required for beginners and experienced users to get started quickly. Based on the STM32F407VGT6, it includes an ST-LINK/V2 embedded debug tool, two ST MEMS, digital accelerometer and digital microphone, one audio DAC with integrated class D speaker driver, LEDs and push buttons and an USB OTG micro-AB connector. The STM3240G-EVAL evaluation board is a complete demonstration and development platform for the STM32 F4 series and includes an STM32F407IGH6 high-performance ARM® Cortex™-M4F 32-bit microcontroller.


STM3240G-SK/KEI Starter Kit for STM32 F4

The STMicroelectronics STM3240G-SK/KEI is a complete, cost-effective solution for starting application development and evaluating the STMicroelectronics STM32F4 series of ARM Cortex™-M4 processor-based microcontrollers. It includes all the hardware and software you need to start developing applications for the STM32 ARM core-based families of microcontrollers. It comes complete with a full-featured evaluation board (including Ethernet, USB HS, VGA camera, external memories, CAN, USUARTs, Audio, and QVGA Touchscreen LCD), Keil's MDK-ARM Lite Edition (32KB) development tools, and the ULINK-ME™ (USB/JTAG) adapter.

View Product List

Additional Resources
Datasheet
STM3240G-SK/KEI Product Info

Netduino 3 Open Source Electronic Platform

Netduino 3 features an STM32F427VI or STM32F427VG ARM Cortex-M4 MCU, 1 or 2MB of flash, and 256KB of RAM. A WiFi enabled version includes the TI CC3100 WiFi chip with 802.11b/g/n connectivity and supports built in SSL, WEP and WPA2. The Netduino 3 includes 3 GoBus 2.0 ports for plug and play components. Arduino shields are supported, including those that use the ICSP header pads.

Learn More About Netduino 3 Open Source Electronic Platform

View Product List

STM32 Nucleo-144 BoardSTM32 Nucleo-144 Board

The STM32 Nucleo-144 board provides an affordable and flexible way to try out new concepts and build prototypes with the STM32 microcontroller. Choose from the various combinations of performance, power consumption and features. The ST Zio connector, which is an extension of Arduino™ Uno, provides access to more peripherals and ST morpho headers make it easy to expand the functionality of the Nucleo open development platform with a wide choice of specialized shields.






Learn More About STM32 Nucleo Development Boards

Buy STMicroelectronics STM32 Nucleo-144 Board View Product List

Additional Resources
Data Brief Datasheet

STM32F429/439 Series MCUsSTM32F427/437 Series MCUsSTM32F407/417 Series MCUsSTM32F405/415 Series MCUsSTM32F411 Series MCUsSTM32F401 Series MCUsSTM32F439/STM32F429 SeriesSTM32F437/STM32F427 SeriesSTM32F417/STM32F407 SeriesSTM32F415/STM32F405 SeriesSTM32F411 SeriesSTM32F401 Series
  • STMicroelectronics
  • Semiconductors|Embedded Processors|IC-MCU/MPU