Contact Mouser (USA)  (800) 346-6873     |     Feedback        
View Cart     |     Change Location  USD
United States United States

Please confirm your currency selection:

US Dollars
Home » NEWEST Products » New by Manufacturer » STMicroelectronics » STM Microcontroller Development Tools
NEWEST Products

STMicroelectronics Microcontroller
Development Tools & Starter Kits

STMicroelectronics' microcontrollers are supported by a complete range of high-end and low-cost evaluation tools. They implement the full range of device peripherals and features of each product line. The evaluation tools also come complete with third-party solutions that use an integrated development environment and in-circuit debugger/programmer featuring the JTAG application interface. Developers who are new to these microcontroller cores and families can also benefit from the range of starter kits that are specially designed to help developers evaluate device features and start their own applications.

STM3210E-EVAL Evaluation Board

The STMicroelectronics STM3210E-EVAL evaluation board is a complete development platform for STMicroelectronic's ARM Cortex-M3 core-based STM32F103ZET6 or STM32F103ZGT6 microcontroller. The range of hardware features on the board help you to evaluate all peripherals (LCD, SPI Flash, USART, IrDA, USB, audio, CAN bus, smartcard, MicroSD Card, NOR Flash, NAND Flash, SRAM, temperature sensor, audio DAC and motor control) and develop your own applications.

Additional Resources

STM3210E-EVAL Product Info
STMicroelectronics STM3210E-EVAL Evaluation Board View Product Detail
  • Three 5 V power supply options:
    • Power Jack
    • USB Connector
    • Daughterboard
  • Boot from user Flash, system memory or SRAM
  • I2S audio DAC, stereo audio jack
  • 128 Mbyte MicroSD Card™ or bigger
  • Both A and B type smartcard support
  • 64 or 128 Mbit serial Flash, 512 Kx16 SRAM, 512 Mbit or 1 Gbit
    NAND Flash and 128 Mbit NOR Flash
  • I2C/SMBus compatible serial interface temperature sensor
  • Two RS-232 channels with RTS/CTS handshake support
    on one channel
  • IrDA transceiver
  • USB 2.0 full speed connection
  • CAN 2.0A/B compliant connection
  • Inductor motor control connector
  • JTAG and trace debug support
  • 240x320 TFT color LCD
  • Joystick with 4-direction control and selector
  • Reset, wakeup, tamper and user buttons
  • 4 color LEDs
  • RTC with backup battery

STMicroelectronics STM3210GPRIMER Development Tool

View Product List

STM3210GPRIMER Development Tool

The STMicroelectronics STM3210GPRIMER is a Raisonance's Primers that are uniquely fun, easy, low-risk solution for exploring, evaluating and developing applications for the STM32 and STM8 microcontrollers. They include everything that users need to better understand the STM32/STM8's peripheral implementation and operation. The EvoPrimer range is an enhancement of the original Primer1 and Primer2 devices. It offers even more flexibility to evaluate a range of STM32 microcontrollers and STM8L ultralow power line microcontrollers, using the same EvoPrimer base with interchangeable target boards (to test different microcontrollers) or extension boards.

Additional Resources

STM32-PRIMER Product Info
  • The versatile EvoPrimer range includes:
    • In-circuit debugging/programming via dedicated USB connection to the host PC
    • Evaluation features including USB connector and MEMs sensor
    • Comprehensive development software
    • Ergonomic design
    • MEMs-based controlsTouchscreen TFT display, color LCD
    • Joystick

    • Audio circuit/Jack
    • MEMS accelerometer
    • Li-Ion battery with charge management circuit
    • Micro SD Card™ connector
    • Add-on connector for extension boards with USART, SPI, I2C and analog/digital I/Os
  • STM32F performance line EvoPrimer features:
    • STM32F103VG MCU with 1 MB Flash
    • Mini-USB connector

STM3210E-SK/IAR Starter Kit

The STMicroelectronics IAR KickStart Kit™ is a complete, cost-effective solution for starting application development and evaluating the STMicroelectronics STM32F101/102/103 ARM core-based microcontrollers. The STM3210E-SK/IAR is a KickStart kit providing all the hardware and software you need to start developing applications including the KickStart development board with target microcontroller, the IAR J-Link in-circuit debugger/programmer (USB/JTAG) and IAR Embedded WorkBench for ARM (EWARM) integrated development environment with the KickStart edition of the IAR C/C++ compiler (output code up to 32 Kbytes), built-in Flash loader and sample projects for all device peripherals.

Additional Resources

STM3210E-SK/IAR Product Info
STMicroelectronics STM3210E-SK/IAR Starter Kit

View Product List
  • The IAR Embedded WorkBench® for ARM (EWARM) software package with:
    • KickStart™ C/C++ compiler for output of code up to 32 Kbytes
    • VisualSTATE® code generator, 20-state version
    • C-SPY®high-level language debugger
    • Editor, linker and librarian tools
  • Embedded J-Link in-circuit debugger/ programmer with USB interface to host PC and 20-pin JTAG application interface
  • Full-featured KickStart development board with target microcontroller

STMicroelectronics STM3210E-SK/HIT Hitex Starter Kit

View Product Detail

STM3210E-SK/HIT Hitex Starter Kit

The STMicroelectronics Hitex starter kits are complete, full-featured solutions for starting application development and evaluating the features of the STMicroelectronics ARM®core-based microcontrollers. They come with all the hardware and software that developers need to start developing applications for STM32, STR9 and STR7 devices, including full-featured evaluation board, target microcontroller, in-circuit debugger/programmer (USB/JTAG) and the HiTOP development software with C/C++toolset.

Additional Resources

STM3210E-SK/HIT Product Info
  • Hitex Development Tools©software toolset for ARM®devices, with:
    • HiTOP integrated development environment (IDE) for application programming and debugging
    • Tasking VX C/C++ compiler (STM32 kits), or GNU C/C++ compiler (STR9 and STR7 kits)
  • In-circuit debugger/programmer with USB interface to host PC and industry-standard JTAG interface to the target device
  • Full-featured Hitex evaluation board with target microcontroller

STM3210E-SK/KEIL Starter Kit

The STMicroelectronics Keil starter kit is a complete, cost-effective solution for starting application development and evaluating the STMicroelectronics STM32F101/102/103 ARM Cortex™-M3 processor-based microcontrollers. The STM3210E-SK/KEIL starter kit provides all the hardware and software you need to start developing applications for the STM32 ARM core-based families of microcontrollers. It comes complete with a full-featured evaluation board (including USB device, CAN, USARTs, Audio, MicroSD Card interface and QVGA LCD), Keil's MDK-ARM Lite Edition (32 KB) development tools, and the ULINK-ME™ (USB/JTAG) adapter.

Additional Resources

STM3210E-SK/KEI Product Info
STMicroelectronics STM3210E-SK/KEIL Starter Kit

View Product List
  • The Keil MDK-Lite development tools:
    • µVision®4 IDE/Debugger for application programming and debugging
    • ARM C/C++ compiler
    • RTX real-time kernel, a multi-tasking operating system for embedded applications
    • MDK-Lite supports applications with up to 32 KB code-size
  • ULINK-ME in-circuit debugger/programmer with USB interface to host PC and 20-pin JTAG or 10-pin CoreSight debug interface
  • Full-featured Keil evaluation board with a 72 MHz STM32F103ZE MCU

STMicroelectronics ST-LINK/V2 In-Circ uit Debugger/Programmer

View Product List

Additional Resources
ST-LINK/V2 Product Info

ST-LINK/V2 In-Circuit Debugger/Programmer

The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board. STM8 applications use the USB full speed interface to communicate with STMicroelectronic's ST Visual Develop (STVD) or ST Visual Program (STVP) software. STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.

  • 5 V power supplied by a USB connector
  • USB 2.0 full speed compatible interface
  • USB standard A to mini B cable
  • SWIM specific features
    • 1.65 V to 5.5 V application voltage supported on SWIM interface
    • SWIM low-speed and high-speed modes supported
    • SWIM programming speed rate: 9.7 Kbytes/s in low speed
      and 12.8 Kbytes/s in high speed
    • SWIM cable for connection to the application via an ERNI standard vertical connector (ref: 284697 or 214017) or horizontal connector (ref: 214012)
    • SWIM cable for connection to the application via a pin
      header or a 2.54 mm pitch connector

  • JTAG/serial wire debugging (SWD) specific features
    • 1.65 V to 3.6 V application voltage supported on the JTAG/SWD interface and 5 V tolerant inputs
    • JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector
      JTAG supported
    • SWD and serial wire viewer (SWV) communication supported
  • Direct firmware update feature supported (DFU)
  • Status LED which blinks during communication with the PC
  • Operating temperature 0 to 50 °C

STX-RLINK In-Circuit Debugger/Programmer

The STMicroelectronics RLink (STX-RLINK) is Raisonance's versatile, low-cost, in-circuit debugger and programmer for a complete range of STMicroelectronics microcontrollers (STM8, ST7, µPSD, STM32, STR7 and STR9). It connects to application or evaluation boards for in-circuit programming and debugging via an industry standard JTAG connection for ARM® core-based and µPSD microcontrollers, via STMicroelectronics' SWIM connection for STM8, or via an in-circuit communication (ICC) connection for ST7 microcontrollers. The RLink, driven by Raisonance's Ride7 integrated development environment provides both unlimited in-circuit debugging and programming of applications for STM8, ST7 and µPSD. It provides in-circuit debugging of up to 32 Kbytes of code for STM32, STR7 and STR9, and unlimited in-circuit programming of applications for these devices.

Additional Resources

STX-RLINK Product Info
STMicroelectronics STX-RLINK In-Circuit Debugger/Programmer

View Product List 
  • In-circuit debugging and programming
  • Connection to application board via JTAG standard, or ST SWIM or ICC connection
  • USB interface to host PC
  • Powered from USB
  • STMicroelectronics
  • Development Tools|Semiconductors|IC-MCU/MPU