Contact Mouser (USA)  (800) 346-6873     |     Feedback        
View Cart     |     Change Location  USD
United States United States

Please confirm your currency selection:

US Dollars
Home » NEWEST Products » New by Manufacturer » mikroElektronika » mikroBUS Adapter Click Boards - mikroElektronika
NEWEST Products
mikroElektronika mikroBUS™ Adapter Click Boards

mikroElektronika mikroBUS™ Adapter Click Boards

mikroElektronika mikroBUS™ Adapter Click Boards are designed to revolutionize the way users add new functionality to development boards. The user can push a Click board into the innovative new mikroBUS™ standard socket and use it with zero hardware configuration. Categories of mikroElektronika mikroBUS™ Adapter Click Boards include Wireless Communication Modules, Wired Communication Modules, Sensor Modules, and Miscellaneous Modules & Accessories. The mikroElektronika mikroBUS™ has an Adapter Click Board (932-MIKROE-1363) to expand functionality for the TI LaunchPad Series.

mikroBUS™ Adapter Click Boards - Wireless Communication Modules


Part Number Description
Power Supply Settings
Image
 BLE P Click
MIKROE-1597

Datasheet

 BLE P click carries a nRF8001 IC for adding a Bluetooth 4.0 (Bluetooth Low Energy) peripheral device to your design.  3.3V

CC3000 Click
MIKROE-1527

Datasheet

Add Wifi communication with the CC3000MOD Wifi 802.11b/g network processor. 3.3V only

WiFi Plus click
MIKROE-1135

Datasheet

Adds WiFi communication to device; features
MRF24WB0MA - 2.4GHz, IEEE std. 802.11 compliant
module, MCW1001 companion controller w/ on-board
TCP/IP stack & 802.11 connection manager,
UART interface, & low power consumption option
3.3V only

Bluetooth click
MIKROE-958

Datasheet

Class 1 high power radio features RN-41
fully qualified Bluetooth 2.1/2.0/1.2/1.1 module
w/ UART interface; can operate up to 100m distance
3.3V only

Bluetooth2 click
MIKROE-1389

Datasheet

Featuring BLUEGIGA WT41 Bluetooth® 2.1 w/ EDR module; communicates w/ target board MCU via mikroBUS™ UART (Tx, Rx), SPI (MOSI, MISO, SCK, CS), SDA, SCL, RST, AN, INT, & PWM lines 3.3V only Bluetooth2 click

BEE click
MIKROE-987

Datasheet

Featuring 2.4GHz IEEE 802.15.4 radio transceiver
module MRF24J40MA & includes integrated
PCB antenna & matching circuitry connected to the microcontroller via SPI interface
3.3V only

GPS click
MIKROE-1032

Datasheet

Featuring LEA-6S high performance u-blox 6
positioning engine & connector compatible
w/ active & passive antennas
3.3V only

GPS click L10
MIKROE-1133

Datasheet

Featuring Quectel® L10, high performance MTK positioning engine, compatible with active and passive antennas.  3.3V only

GPS2 click
MIKROE-1374

Datasheet

Featuring Quectel L30 GPS module & SMA antenna connector; communicates w/ target board MCU
via mikroBUS™ UART (Tx, Rx), I²C (SCL, SDA),
SPI (MISO, MOSI, SCK, CS), PWM, INT, AN, & RST lines
3.3V or 5V
power supply

GSM click
MIKROE-1298

Datasheet

Adds GSM/GPRS mobile phones standard; featuring GL865-QUAD GSM/GPRS module, TXB0106 6-bit bidirectional voltage-level translator, & SIM CARD socket; communicates w/ target board MCU via 7 mikroBUS™ lines (RX, TX, INT, PWM, CS, RST, AN) 3.3V or 5V
power supply

GSM2 click
MIKROE-1375

Datasheet

Featuring Quectel M95 GSM module, audio connector,
SIM card socket, & SMA antenna connector;
communicates w/ target board MCU via mikroBUS™
UART (Tx, Rx), PWM, INT, AN, RST, & CS lines
3.3V or 5V
I/O level

nRF C click
MIKROE-1304

Datasheet

Featuring nRF24L01P 2.4GHz transceiver module
w/ embedded baseband protocol engine & 2.4GHz SMD chip antenna; communicates w/ target board MCU via mikroBUS™ SPI (SDI, SDO, SCK, CS#), CE, & INT lines
3.3V only

nRF T click
MIKROE-1305

Datasheet

Featuring nRF24L01P 2.4GHz transceiver module
w/ embedded baseband protocol engine & 2.4GHz PCB trace antenna; communicates w/ target board MCU via mikroBUS™ SPI (SDI, SDO, SCK, CS#), CE, & INT lines
3.3V only

ccRF click
MIKROE-1435

Datasheet

Featuring CC2500 Low-Power 2.4 GHz RF transceiver as well as PCB trace antenna. ccRF click communicates with the target board microcontroller via mikroBUS SPI, RST and PWM lines.
3.3V only

IR click
MIKROE-1377

Datasheet

Featuring TSOP38338 IR receiver module & QEE113
IR emitting diode; communicates w/ target board MCU
via mikroBUS™ UART (Tx, Rx), AN, & PWM lines
3.3V or 5V
power supply

FM click
MIKROE-1431

Datasheet

Featuring Si4703 broadcast FM radio tuner, 2 LM4864 audio amplifiers, & stereo audio connector;
communicates w/ target board MCU via mikroBUS™ I²C (SDA, SCL), INT, RST, CS, & AN lines
3.3V only FM click

RFid click
MIKROE-1434

Datasheet

Features CR95HF 13.56 MHz contactless transceiver as well as trace antenna. RFid click communicates with the target board microcontroller via mikroBUS UART, SPI INT, RST, PWM, and AN lines. 3.3V only

mikroBUS™ Adapter Click Boards - Wired Communication Modules


Part Number Description
Power Supply Settings
Image
 PS/2 Click
MIKROE-1527

Datasheet

 PS/2 click™ is a cost-effective solution for adding keyboard and mouse connectivity to your design.5V
RS232 Click
MIKROE-1582
​ 

Datasheet

 RS232 click is a simple solution for adding RS232 connectivity to your design.3.3V - 5V
 
 Arduino Uno Click
 MIKROE-1581

Datasheet

 Arduino Uno click shield is an extension for Arduino Uno and any other Arduino-compatible board. It's a simple shield with two mikroBUS™ host sockets that allow you to connect more than 75 different types of click boards to the Arduino.N/A

Pi Click
MIKROE-1512
MIKROE-1513

Datasheet

Equip your Raspberry Pi with Click board compatibility. N/A Pi Click

IrDA2 click
MIKROE-1195

Datasheet

Features TFDU4101 IR transceiver module,
MCP2120 IR encoder/decoder connected
w/ 7.3728 MHz external crystal,
plus a UART interface & green LED power indicator
3.3V default;
solder to 5V
position for 5V systems

ADC Click
MIKROE-922

Datasheet

12-bit Analog-to-Digital Converter MCP3204
features 50k samples/second, 4 input channels,
& low-power consumption
(500nA typical standby, 2μA max)
3.3V default;
solder to 5V
position for 5V systems

DAC Click
MIKROE-950

Datasheet

12-bit Digital-to-Analog Converter MCP4921 features
SPI interface & optional double-buffered output;
provides high accuracy & low noise performance
for industrial apps requiring calibration
or compensation of signals
3.3V default;
solder to 5V
position for 5V systems

ETH Click
MIKROE-971

Datasheet

Features ENC28J60, a 28-pin, 10BASE-T stand alone
Ethernet controller with an on-board MAC & PHY,
8Kb of Buffer RAM, and SPI serial interface
3.3V only

CAN SPI click 3.3V
MIKROE-986

Datasheet

Features SN65HVD230 CAN transceiver circuit for
CAN serial communication physical layer according to
ISO 11898 standard; designed for operation
in especially harsh environments
3.3V only

CAN SPI click 5V
MIKROE-988

Datasheet

Features MCP2551 CAN transceiver circuit for CAN
serial communication physical layer according to
ISO 11898 standard; designed for operation in
especially harsh environments
5V only

RS485 Click 3.3V
MIKROE-989

Datasheet

Includes on-board SN65HVD12 differential line
transceiver for high speed bidirectional data communication on multi-point bus transmission lines
3.3V only

RS485 Click 5V
MIKROE-925

Datasheet

Includes on-board ADM485 differential line transceiver
for high speed bidirectional data communication
on multi-point bus transmission lines
5V only

4-20mA T click
MIKROE-1296

Datasheet

Features ADuM1411 Quad-chanel digital isolator, MCP4921 12-bit DAC, & XTR116 4-20mA current loop transmitter; communicates w/ target board MCU via 3 mikroBUS™ SPI lines (SDI, SCK, CS) 3.3V or 5V
power supply

4-20mA R click
MIKROE-1387

Datasheet

Features INA196 current shunt monitor, MCP3201
12-bit ADC, & TPS61041 DC/DC boost converter;
communicates w/ target board MCU via mikroBUS™
SPI (SDO, SCK, CS) & EN lines
3.3V or 5V
power supply

USB SPI click
MIKROE-1204

Datasheet

Adds SPI serial communication via USB cable,
featuring MCP2210 USB-to-SPI protocol converter
w/ GPIO & USB MINI B connector; communicates
w/ target board via SPI interface as master device
3.3V or 5V
power supply

USB UART click
MIKROE-1203

Datasheet

Adds serial UART communication via USB cable,
featuring FT232RL USB-to-UART interface module
& USB MINI B connector; communicates
w/ target board via UART interface
3.3V or 5V
I/O level

DALI click
MIKROE-1297

Datasheet

Adds Digital Addressable Lighting Interface (DALI); featuring 2 optocouplers, push button,
& screw terminals; communicates w/ target board MCU
via 4 mikroBUS™ lines (RST, CS, PWM, & INT)
3.3V or 5V
power supply

OSD click
MIKROE-1366

Datasheet

Adds monochrome on-screen display (OSD) generator; featuring MAX7456 single-channel monochrome OSD module w/ integrated EEPROM memory & 2 RCA sockets; communicates w/ target board MCU via mikroBUS™ SPI (SDI, SDO, SCK, CS#), RST, LOS, HSYNC, & VSYNC lines 5V only

FTDI click
MIKROE-1421

Datasheet

Adds USB to UART/SPI/I²C communication; featuring FT2232H dual high speed USB to multipurpose IC, DA converter, & EEPROM; communicates w/ target board MCU via mikroBUS™ SPI (MOSI, MISO, SCK, CS), I²C (SDA, SCL), UART (Tx, Rx), RST, PWM, AN, & INT lines 3.3V or 5V
power supply
FTDI click

Click USB Adapter
MIKROE-1433

Datasheet

 Click USB adapter board provides necessary interface for connecting Click add-on boards to your PC through high-speed USB connection.  3.3V or 5V power supply

EVE Click
MIKROE-1430
Learn More

Datasheet

Featuring FT800Q graphics controller, flat cable connector, LM4864 audio amplifier, LED diode, & screw terminals; communicates w/ target board MCU via mikroBUS™ SPI (MISO, MOSI, SCK, CS), INT, RST, & AN lines 3.3V only
EVE Click

Fiber Optic Click
MIKROE-1436

Datasheet

Features IF-D91 fiber-optic photodiode, IF-E97 fiber-optic LED diode and two operational amplifiers. Fiber Opt click communicates with the target board microcontroller via mikroBUS UART and PWM lines. 3.3V only

Fiber Optic Click
MIKROE-1470

Datasheet

Features IF-D91 fiber-optic photodiode, IF-E97 fiber-optic LED diode and two operational amplifiers. Fiber Opt click communicates with the target board microcontroller via mikroBUS UART and PWM lines. 5V only

mikroBUS™ Adapter Click Boards - Sensor Modules


Part Number Description
Power Supply Settings
Image
 MPU IMU Click
 MIKROE-1577

Datasheet

MPU IMU click carries the MPU-6000 integrated 6-axis motion tracking device that combines a 3-axis gyroscope, a 3-axis accelerometer, and a DMP (Digital Motion Processor) into a single small chip. The gyroscope has a sensitivity up to 131 LSBs and a full-scale range of ±250, ±500, ±1000, and ±2000dps.3.3V
 Hall Current Click
 MIKROE-1578

Datasheet

Hall current click™ is a high precision current sensor. It carries a galvanically isolated TLI4970-D050T4 miniature magnetic digital current sensor that utilizes the Hall effect to measure electric current.3.3V
 LDC1000 Click
 MIKROE-1583

Datasheet

LDC1000 click carries the world's first inductance-to-digital converter IC, along with a detachable sensor.3.3V - 5V
 Alcohol Click
 MIKROE-1586

Datasheet

Alcohol click carries an MQ-3 Semiconductor sensor for alcohol.5V
LPG Click
MIKROE-1587

Datasheet

LPG click carries an MQ-5 sensor for detecting liquefied petroleum gas leakage.5V
 CO Click
 MIKROE-1626

Datasheet

CO click carries an MQ-7 sensor for Carbon monoxide.5V
Methane Click
MIKROE-1628

Datasheet

Methane click carries an MQ-4 sensor for methane (CH4).5V
Hydrogen Click
MIKROE-1629

Datasheet

Hydrogen click carries an MQ-8 sensor for hydrogen (H2).
5V
 Air Quality Click
 MIKROE-1630

Datasheet

Air quality click carries an MQ-135 sensor for detecting ammonia (NH3), nitrogen oxides (NOx), benzene, smoke, CO2 and other harmful gases.5V
 Bi Hall Click
 MIKROE-1646

Datasheet

Bi Hall click is a simple solution for adding a bipolar Hall switch to your design. It carries the Melexis US2882 bipolar Hall-effect switch and a 74LVC1T45 single bit, dual supply transceiver.3.3V - 5V
 Uni Hall Click
 MIKROE-1647

Datasheet

UNI HALL click is a simple solution for adding an unipolar Hall switch to your design. It carries the Melexis US5881 unipolar Hall-effect switch and a 74LVC1T45 single bit, dual supply translating transceiver.3.3V - 5V
 LIN Hall Click
 MIKROE-1648

Datasheet

LIN HALL click carries an MLX90242 linear Hall sensor IC and an MCP3201 12-bit ADC. It outputs a signal that is proportional to the flux density of a magnetic field—a north magnetic field will increase the output value while a south magnetic field will cause it to decrease.3.3V - 5V

Capsense Click
MIKROE-1446

Datasheet

Add capacitive sensing elements to your design with the CY8C201AO capacitive controller 3.3V or 5V

Opto click
MIKROE-1196

Datasheet

Adds electrical isolation between inputs & outputs
to device; featuring 2x DIP VO2630 dual channel,
high speed optocoupler modules, 4x mikroBUS™ communication lines (INT, CS, RST, AN),
& green LED power indicator
3.3V default;
solder to 5V
position for 5V systems

THERMO click
MIKROE-1197

Datasheet

Features MAX31855K thermocouple-to-digital converter,
PCC-SMP connector for K-type thermocouple probes,
SPI interface (read-only), & green LED power indicator
3.3V only
Altitude Click
MIKROE-1489


Datasheet
Features a MEMS pressure sensor MPL3115A2, which provides accurate pressure/altitude and temperature data. The MPL3115A2 contains automatic internal data processing with data acquisition and compensation and can autonomously collect data at programmed intervals and store it up to 12 days. 3.3V only
Altitiude Click

Accel click
MIKROE-1194

Datasheet

Features ADXL345 3-axis accelerometer module
w/ ultra-low power & high resolution
13-bit measurement, I²C or SPI interface,
& green LED power indicator
3.3V only

SHT11 Click
MIKROE-949

Datasheet

Includes digital humidity & temperature sensor SHT11;
unique capacitive sensor element measures relative
humidity, band-gap sensor measures temperature
3.3V default;
solder to 5V
position for 5V systems

LightHz click
MIKROE-990

Datasheet

Features TSL230BR programmable light-to-frequency converter; output can be either pulse train or
square wave (50% duty cycle) w/ frequency
directly proportional to light intensity
3.3V default;
solder to 5V
position for 5V systems

IrThermo
click 3.3V
MIKROE-1361

Datasheet

Featuring MLX90614ESF-BAA single zone Infrared (Ir) thermometer module; communicates w/ target board
MCU via mikroBUS™ I²C lines (SCL, SDA) & PWM line
3.3V only

IrThermo click 5V
MIKROE-1362

Datasheet

Featuring MLX90614ESF-AAA single zone Infrared (Ir) thermometer module; communicates w/ target board
MCU via mikroBUS™ I²C lines (SCL, SDA) & PWM line
5V only

Relay click
MIKROE-1370

Datasheet

Featuring 2 G6D1AASI-5DC power PCB relay modules
& 2 screw terminals; communicates w/ target board
MCU via mikroBUS™ PWM (RL1) & CS (RL2) pins
5V only

Gyro click
MIKROE-1379

Datasheet

Featuring L3GD20 3-axis digital gyroscope module; communicates w/ target board MCU via mikroBUS™
SPI (MOSI, MISO, SCK, CS), I²C (SDA, SCL),
INT, & RST lines
3.3V only

Compass click
MIKROE-1386

Datasheet

Featuring LSM303DLHC ultra compact high performance e-compass module; communicates w/ target board
MCU via mikroBUS™ I²C (SDA, SCL), INT, & RST lines
3.3V only

Current click
MIKROE-1396

Datasheet

Featuring INA196 current shunt monitor, MCP3201 12-bit ADC, MAX6106 voltage reference, & two screw terminals; communicates w/ target board MCU via mikroBUS™ SPI (SDO, SCK, CS), & AN lines 3.3V or 5V
power supply
Current click

Pressure click
MIKROE-1422

Datasheet

Featuring LPS331AP digital output pressure sensor; communicates w/ target board MCU via mikroBUS™ SPI (MOSI, MISO, SCK, CS), I²C (SDA, SCL), & INT lines 3.3V only
Pressure click

Light click
MIKROE-1424

Datasheet

Featuring PD15-22CTR8 PIN photodiode, MAX6106 voltage reference, & MCP3201 ADC w/ SPI interface; communicates w/ target board MCU via mikroBUS™ SPI (MISO, SCK, CS), & AN lines 3.3V or 5V
power supply
Current click

Thunder click
MIKROE-1444

Datasheet
Features AS3935 lightning sensor as well as MA5532 coil antenna. Thunder click communicates with the target board microcontroller via mikroBUS SPI and INT lines. 3.3V or 5V
power supply

Proximity click
MIKROE-1445

Datasheet
Features VNCL4010 proximity and ambient light sensor. Proximity click communicates with the target board microcontrollers via mikroBUS I²C and INT lines. 3.3V or 5V
power supply

mikroBUS™ Adapter Click Boards - Miscellaneous Modules & Accessories


Part Number Description
Power Supply Settings
Image
 Thumbstick Click
 MIKROE-1627

Datasheet

Thumbstick click is a high precision input device. It features a dual axis, spring return, pushbutton enabled joystick and a MCP3204 12-bit A/D converter.3.3V - 5V

FRAM Click
MIKROE-1486

Datasheet

FRAM click™ brings 256K (32,768 words x 8 bits) of FRAM and features the MB85RS256A module. It is able to retain data without using a back-up battery and can be used for 10 billion read/write operations. 3.3V

SpeakUp Click
MIKROE-1534

Datasheet

A speech recognition click™ board. You can set it up to recognize over 200 different voice commands and have the on-board MCU carry them out instantly. -

Stepper Motor Click
MIKROE-1528

Datasheet

Stepper motor driver board featuring the A3967SLBT microstepping motor driver with a built-in translator. 3.3V or 5V

Joystick Click
MIKROE-1506

Datasheet

A compact solution for adding joystick to your design. It features AS5013 Hall IC as well as N50P105 miniature magnetic joystick module. 3.3V

Proto Click
MIKROE-1507

Datasheet

Features a 10x11mm prototyping area as well as additional power pads -

DC Motor Click
MIKROE-1526

Datasheet

DC motor driver board with the DRV8833RTY H-bridge motor driver. 3.3V or 5V

RTC Click
MIKROE-947

Datasheet

Features PCF8583P serial real-time clock (RTC) low-power, full binary-coded decimal (BCD)
clock/calendar
3.3V default; solder to 5V position for 5V systems

RTC2 Click
MIKROE-948

Datasheet

Features DS1307 serial RTC low-power,
full BCD clock/calendar
w/ programmable square-wave output signal
5V only

MP3 Click
MIKROE-946

Datasheet

Stereo MP3 decoder chip VS1053 decodes
multiple formats & encodes 3 formats from
mic in mono or stereo format;
board also features stereo headphone
& mic audio connectors
3.3V only

microSD Click
MIKROE-924

Datasheet

Features microSD card slot for microSD cards
used as mass storage media for portable devices
3.3V only

BUZZ Click
MIKROE-945

Datasheet

Features piezo speaker for emitting audio signals;
buzzer's resonant frequency is 3.8kHz for
best performance, & on-board buzzer driver
can be connected to either digital (GPI) or PWM line
5V default;
solder to 3.3V
position for 3.3V systems

DIGIPOT Click
MIKROE-923

Datasheet

Features single-channel digital potentiometer
CP4161 w/ 8-bit resolution (256 wiper steps)
& industry-standard SPI serial interface;
resistance value of digital potentiometer
goes up to 10kΩ
3.3V default; solder to 5V position for 5V systems

EXPAND Click
MIKROE-951

Datasheet

Includes 16-bit I/O expander MCP23S17 w/ SPI
clock speeds up to 10MHz for higher throughput apps;
3 jumpers allow configuration of board address &
connection of up to 8 devices
3.3V default; solder to 5V position for 5V systems

7seg click
MIKROE-1201

Datasheet

Features 2x 74HC595 8-bit serial-in, parallel-out
shift register modules, 2x seven-segment displays,
SPI interface, & green LED power indicator
3.3V default; solder to 5V position for 5V systems

8x8 Y click
MIKROE-1294

Datasheet

Features MAX7219 8-digit LED display driver module
& 64 YELLOW LED diodes; communicates w/ target
board MCU via 4 mikroBUS™ SPI lines
(DIN, DOUT, CLK, & CS)
5V primary, but can be used w/ 3.3V as well

8x8 R click
MIKROE-1295

Datasheet

Features MAX7219 8-digit LED display driver module
& 64 RED LED diodes; communicates w/ target
board MCU via 4 mikroBUS™ SPI lines
(DIN, DOUT, CLK, & CS)
5V primary, but can be used w/ 3.3V as well

8x8 Green click
MIKROE-1306

Datasheet

Adds 8x8 GREEN LED matrix; featuring MAX7219 8-digit LED display driver module & 64 GREEN LED diodes; communicates w/ target board MCU via 4 mikroBUS™
SPI lines (DIN, DOUT, CLK, & CS)
5V primary, but can be used w/ 3.3V as well

8x8 B click
MIKROE-1307

Datasheet

Features MAX7219 8-digit LED display driver module
& 64 BLUE LED diodes; communicates w/ target
board MCU via 4 mikroBUS™ SPI lines
(DIN, DOUT, CLK, & CS)
5V primary, but can be used w/ 3.3V as well 8x8 B click

EEPROM click
MIKROE-1200

Datasheet

Features DIP 24C08 8kb serial EEPROM
module in DIP 8 socket, I²C interface,
& green LED power indicator
3.3V default; solder to 5V position for 5V systems

Flash click
MIKROE-1199

Datasheet

Features M25P80 - 8Mb serial Flash memory module
w/ advanced hardware write protection mechanisms,
SPI interface, & green LED power indicator
3.3V only

BarGraph click
MIKROE-1423

Datasheet

Featuring JSB-R102510Z 10-segment light bar display & two 74HC595 shift registers; communicates w/ target board MCU via mikroBUS™ SPI (MOSI, MISO, SCK, CS), RST, & PWM lines 3.3V or 5V
power supply
BarGraph click

mikroBUS Shield
for mikromedia
MIKROE-1154

Datasheet

Extension board, pin-compatible w/ all mikromedia boards, features 2x mikroBUS host sockets,
prototyping breadboard area, 2x 1x26 pin female
sockets, & 4x 1x8 female sockets
for mikroBUS host connectors
-

click Booster Pack for TI TIVA C
MIKROE-1363

Datasheet

Extension for TI TIVA C LaunchPad;
carries single mikroBUS host socket for flexibility
& seamless integration; two 2x10 & two 1x8
female headers delivered w/ board
3.3V or 5V
power supply

Adapter click
MIKROE-1432

Datasheet

Solution for adding mikroBUS to IDC10 adapter, featuring 2x5 connection pads and two jumpers for SPI/I²C selection. Adapter click communicates with the target board microcontroller via mikroBUS I²C, SPI, UART, INT, and PWM. 3.3V or 5V
power supply

 microTFT
 MIKROE-1439

Datasheet

2.8" TFT color display MI0283QT-9A with 320x240 resolution, driven by the ILI9341 display controller. The display is capable of 262K colors, and is covered with a resistive touch panel and is able to be used as an input device. 3.3V only
 
STM32F3 Discovery Shield
MIKROE-1447

Datasheet
Learn More
Discovery Shield is a docking station that can be used with the STM32F3 Discovery Boards. They can be used to quickly turn your Discovery board into a RFid lock, SMS-triggered control switch, GPS tracking device, full-blown weather station, or whatever else you have in mind.
-  
STM32F4 Discovery Shield
MIKROE-1482

Datasheet
Learn More
Discovery Shield is a docking station that can be used with the STM32F4 Discovery Boards. They can be used to quickly turn your Discovery board into a RFid lock, SMS-triggered control switch, GPS tracking device, full-blown weather station, or whatever else you have in mind.
-
 
Plugging in a Click Board

Datasheet

  • mikroElektronika
  • Development Tools|Embedded Solutions