• Order Now
• View Product List
• Datasheet
• Dev Board User's Guide
• More About Microchip

Microchip PIC24FJ256DA Flash MCUs

Microchip Technology PIC24FJ256DA 16-bit Flash Microcontrollers (MCUs) integrate three graphics acceleration units and a display controller along with 96KB of RAM. These highly integrated Microchip Technology MCUs reduce system cost and make it practical to add advanced graphics displays for a wide range of embedded applications by eliminating the need for external RAM and a display controller. PIC24FJ256DA devices also feature integrated peripherals for USB and capacitive touch sensing. The Microchip Technology PIC24FJ256DA MCU family also features 24 channels of on-chip mTouch™ capacitive touch sensing, which enables a large number of buttons, sliders, and keys.

• 3x Graphics Hardware Acceleration Units
  
• Color Look-up Table (CLUT) with Maximum of 256 Entries
  
• Direct Interface to Monochrome, C-STN, TFT, OLED
  
• Resolution up to 640x480 @30Hz, 16 bpp, or 480x272 @60Hz, 16 bpp

• USB v2.0 On-The-Go (OTG) Compliant
  
• Dual Role Capable - Can act as either Host or Peripheral
  
• Low-Speed (1.5 Mbps) and Full-Speed (12 Mbps) USB Operation in Host mode
  
• Full-Speed USB Operation in Device mode

• Up to 24-channel, 10-Bit ADC at 500 ksps:
  
• 3x Analog Comparators with Programmable Input/Output Configuration
• Support for capacitive touch sensing

• On-Chip Voltage Regulator of 1.8V
  
• Switch between Clock Sources in Real Time
  
• Idle, Sleep and Doze modes with Fast Wake-up and Two-Speed Start-up
  
• Run Mode: 800 uA/MIPS, 3.3V Typical
  
• Sleep mode Current Down to 20 uA, 3.3V Typical
  
• Standby Current with 32 kHz Oscillator: 22 uA, 3.3V Typical
  

Microchip PIC24FJ256DA210 Development Board

The Microchip Technology PIC24FJ256DA210 Development Board is a low cost and efficient development board to evaluate the features and performance of the PIC24FJ256DA210. This Microchip development board is an ideal platform for developing graphical human interface applications. The development board requires a display board to complete the 2-board setup. It has a Microchip display connector V1 and allows developers to match with a Microchip 3.2" or 4.3" TFT display or graphics prototype board. The development board also provides a complete interface to MPLAB ICD-3, MPLAB REAL ICE, and MPLAB PICkit-3 Emulator and Debugger.

View Product List

View Associated Products

Microchip PIC24FJ256DA210 Development Kit

The PIC24FJ256DA210 Development Kit is a low cost and efficient development kit to evaluate the features and performance of the PIC24FJ256DA210 with integrated graphics, mTouch, and USB. This kit is an ideal platform for new graphical human interface developers. It bundles four major components and other accessories as listed below. For those who are not looking to purchase the kit with all the components, each can also be purchased separately.