Contact Mouser (USA)  (800) 346-6873     |     Feedback        
View Cart     |     Change Location  USD
United States United States

Please confirm your currency selection:

US Dollars
Home » NEWEST Products » New by Manufacturer » Microchip Technology » USB553xB 2/3/4/7-Port USB Hub Controller - Microchip
NEWEST Products
Microchip USB5532B 2/3/4/7-Port SuperSpeed/Hi-Speed USB Hub Controller

Microchip USB553xB 2/3/4/7-Port
SuperSpeed/Hi-Speed USB Hub Controller

Microchip's USB553xB Hi-Speed USB Hub Controllers are 2/3/4/7-port, SuperSpeed (SS) / Hi-Speed (HS), low-power, configurable and fully-compliant with the USB 3.0 Specification. The USB553xB also supports Full Speed (FS) and Low Speed (LS) USB signaling, offering complete coverage of all defined USB operating speeds. The new SuperSpeed hub controller (available on 4 of the 7 ports for the USB5537B) operates in parallel with the USB 2.0 controller, so the 5Gbps SuperSpeed data transfers are not affected by the slower USB 2.0 traffic.

Features
  • USB 3.0 compliant 5Gbps, 480Mbps, 12Mbps and 1.5Mbps operation, USB pins are 5V tolerant
    • Integrated termination and pull-up/pull-down resistors
  • Two downstream USB 3.0 ports
  • Supports battery charging of most popular battery powered devices
    • USB-IF Battery Charging rev. 1.2 support (DCP & CDP)
    • Apple Portable product charger emulation
    • Blackberry charger emulation
    • Chinese YD/T 1591-2006 charger emulation
    • Chinese YD/T 1591-2009 charger emulation
    • Supports additional portable devices
  • Emulates portable/handheld native wall chargers
    • Charging profiles emulate a handheld device's wall charger to enable fast charging (minutes vs. hours)
  • Enables charging from a mobile platform that is off
  • Support tablets' high current requirements
  • Optimized for low-power operation and low thermal dissipation
  • Vendor Specific Messaging (VSM) support for firmware upload over USB
  • Configuration via OTP ROM, SPI ROM, or SMBus
  • On-chip 8051 μC manages VBUS, and other hub signals
  • 8K RAM, 32K ROM

  • One Time programmable (OTP) ROM: 8kbit
    • Includes on-chip charge pump
  • Single 25MHz XTAL or clock input for all on-chip PLL and clocking requirements
  • Supports JTAG boundary scan
  • PHYBoost (USB 2.0)
    • Selectable drive strength for improved signal integrity
  • VariSense (USB 2.0)
    • Controls the receiver sensitivity enabling four programmable levels of USB signal receive sensitivity
  • IETF RFC 4122 compliant 128-bit UUID
  • Compatible with Microsoft Windows 7, Vista, XP, Mac OSX10.4+, and Linux Hub Drivers

Additional Resources

USB5532B Datasheet USB5532B Datasheet
USB5533B Datasheet USB5533B Datasheet
USB5534B Datasheet USB5534B Datasheet
USB5537B Datasheet USB5537B Datasheet
Block Diagram
Block Diagram
Sign-Up for New Product Announcements from Mouser
Mouser.com Comments

Mouser welcomes lively and courteous interaction on our website. In order to host a cooperative discussion, please keep comments relevant to the topics on this page. All comments are reviewed prior to being posted to ensure appropriate language and content is used.

  • Microchip Technology