Contact Mouser (USA)  (800) 346-6873     |     Feedback        
View Cart     |     Change Location  USD
United States United States

Please confirm your currency selection:

US Dollars
Home » NEWEST Products » New by Manufacturer » Lantronix » xPICO WiFi Embedded Wireless Device Servers - Lantronix
NEWEST Products
Lantronix xPICO WiFi Embedded Wireless Device Servers

Lantronix xPICO WiFi Embedded
Wireless Device Servers

Lantronix's xPico® Wi-Fi® Embedded Wireless Device Servers are the most flexible, mobile-ready, Wi-Fi solution for M2M and IOT applications. These devices reduce your development costs, shorten your time to market, and leverage mobile solutions with xPico Wi-Fi, one of the world's smallest and most flexible Wi-Fi device servers. xPico Wi-Fi is a pin and form factor compatible state-of-the-art member of the xPico family, providing low power, Soft AP and simultaneous client mode, full IP and WLAN stacks. The xPico Wi-Fi is a complete device server suitable for mobile M2M applications and includes industry best 5-year warranty.

  • Chip-sized footprint: 24mm x 16.5mm
  • Low Power (6μA Standby)
  • Can be operated off batteries
  • IEEE 802.11 b/g/n (2.4GHz)
  • Simultaneous Soft AP and Client mode
  • Complete Device Server Application with full IP Stack and Web Server
  • Dual Serial Port with Data Rate of up to 921 kbps
  • SPI with clock rate of 20MHz
  • USB 2.0 full rate device mode
  • 256-bit AES Encryption
  • Industrial Temperature Range : -40° to +85°C
  • 5-Year Limited Warranty
  • Wireless LAN Interface
    • IEEE 802.11 b/g and IEEE 802.11n (single stream) WLAN interface (2.4 GHz only)
    • IEEE 802.11 d/h/i/j/k/w/r
    • WPS 2.0 support
    • u.FL connector for external antenna
  • Serial Interface
    • Two Serial CMOS Ports (3.3V, 5V tolerant)
    • 300 to 921.6 Kbps
    • Flow control XON/XOFF, RTS/CTS (SPort 1 only)
    • Lantronix tunneling application (SPort 1 only)
  • Host Interface
    • Dual Serial Port, SPI, USB 2.0 (device)
    • 8 GPIO
  • Network Protocols

    • Networking Capabilities
      • Soft Access Point with DHCP Server
      • Lantronix SmartRoam™ Technology continually tracks Wi-Fi signal strength within range, along with preauthentication and caching resulting in smooth and automatic transition to access points without delay.
      • QuickConnect: Dynamic Profiles facilitate easy and rapid connections to access points
    • Management and Control
      • Web Server - Landing Page
      • CLI (Serial Monitor Port)
      • XML import and Export (XCR)
      • Field upgradable firmware (OTA)
    • Security
      • IEEE 802.11i Support - WPA-Personal, WPA2-Personal
    • Architecture
      • ARM Cortex M3 class processor with on-chip Flash and SRAM
      • 1MB Flash and 128KB SRAM
      • 1MB SPI Flash storage
    • Power
      • Input Voltage: 3.3VDC
      • Low power consumption of approximately 6μA standby
    • Physical Interface
      • 40-pin Board-to-Board SMT Connector
    • Certifications
      • FCC Class B, UL and EN EMC, Japan
    • Lantronix