Contact Mouser (USA)  (800) 346-6873     |     Feedback        
View Cart     |     Change Location  USD
United States United States

Please confirm your currency selection:

US Dollars
Home » NEWEST Products » New by Manufacturer » Lantronix » xPico Embedded Device Servers - Lantronix
NEWEST Products
Lantronix xPico™ Embedded Device Servers

Lantronix xPico™

Lantronix xPico™ Embedded Device Servers

Lantronix xPico™ Embedded Device Servers are designed for quick integration with minimal engineering effort, and provide simplicity and flexibility, making them the easiest and fastest networking-enabling modules on the market. The chip-sized xPico is an extremely compact networking solution that enables Ethernet connectivity on virtually any device with a serial interface. The included Lantronix device server application and full IP stack allow seamless remote access to device data simplifying design integration while providing robust connectivity. As the smallest embedded device server in the world, xPico can be utilized in designs typically intended for chip solutions. A key difference with the xPico is that there is virtually no need to write a single line of code, translating to a much lower development cost and faster time-to-market.

Part Number Datasheet Description
XPC100100S-01 Datasheet
xPico Device Server Module - sample
XPC100100B-01 xPico Device Server Module - bulk
XPC10010MB-01 xPico Device Server Module - Modbus
XPC100100K-02 Datasheet xPico Development Kit w/ module
  • Chip-sized footprint: 24mm x 16.5mm
  • Complete device server application with full IP stack and web server
  • Serial data rate of up to 921Kbps
  • Security: 256-bit AES Encryption
  • Extended temperature range: -40º to +85ºC

  • Serial interface
    • CMOS (Asynchronous) 3.3V-level signals (5V tolerant)
    • Data rates: 300 to 921,600bps (software selectable)
    • Data bits: 7 or 8
    • Stop bits: 1 or 2
    • Parity: Odd, Even, None
    • Control signals: DTR/DCD, RTS/CTS
    • Flow control: XON/XOFF (software), CTS/RTS (hardware), None
    • Programmable I/O: 8 PIO pins (software selectable)
  • Network interface
    • Ethernet 10Base-T or 100Base-TX (Auto-sensing)
    • Protocols: TCP/IP, UDP/IP, ARP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP, AutoIP, and HTTP
  • Management: SNMP, Telnet, serial, Internal Web Server, and Microsoft Windows-based utility for web configuration
  • Internal storage capacity: 384KB for web pages
  • Architecture
    • CPU: Based on the DSTni-EX enhanced 16-bit x86 architecture
    • Memory: 256KB SRAM, 512KB Flash
    • Firmware upgradeable via TFTP, serial port
  • Power - input voltage: 3.3VDC
  • Physical interface: 40-pin SMT connector
  • Included Software
    • MS Windows-based Device Installer
    • MS Windows-based Com Port Redirector

xPico Comparison: Smaller than a standard SD card
xPico Comparison: Smaller than a standard SD card

xPico in Alarm Control Panel Application
xPico in Alarm Control Panel Application

Lantronix xPico Wi-Fi Shields

Lantronix xPico is now available as expansion boards for Raspberry Pi and Arduino. Developers can now easily add the robust and feature rich xPico Wi-fi solution to their existing development boards to enable quick and easy prototyping of designs.

Part Number Description
XPCW1001000AR-K Arduino xPico Wi-Fi Shield
XPCW1001000RP-K Raspberry Pi xPico Wi-Fi Pi Plate Comments CommentsMouser welcomes lively and courteous interaction on our website. In order to host a cooperative discussion, please keep comments relevant to the topics on this page. All comments are reviewed prior to being posted to ensure appropriate language and content is used.

  • Lantronix
  • Embedded Solutions