Contact Mouser (USA)  (800) 346-6873     |     Feedback        
View Cart     |     Change Location  USD
United States United States

Please confirm your currency selection:

US Dollars
Home » NEWEST Products » New by Manufacturer » IXYS » MOSFET & IGBT Gate Drivers - IXYS
NEWEST Products
IXYS MOSFET & IGBT Gate Drivers

IXYS MOSFET & IGBT Gate Drivers

IXYS offers a variety of low-side, high-side, high-side & low-side, and optically isolated MOSFET and IGBT Gate Drivers for a number of applications. The low-side gate drivers are ultra-fast, high current MOSFET and IGBT gate drivers that are optimized for high efficiency performance in motor drive and power conversion applications. The high-side gate drivers use a proprietary common-mode design techniques provide stable operation in high dV/dt noise environments. The high-side & low-side gate drivers are configured with independent high-side and low-side referenced output channels, both of which can source and sink up to 2A. The optically isolated gate drivers couple infrared light emitting diodes with proprietary photovoltaic integrated circuits to provide voltage for turn-on of discrete MOSFETs, and feature a gate-clamping circuit to provide fast turn-off.

IXYS Low-Side Gate Drivers are ultra-fast, high current MOSFET and IGBT gate drivers that are optimized for high efficiency performance in motor drive and power conversion applications. With output current ratings of 1.5A to 30A, they are designed to switch the largest MOSFETs and IGBTs with minimum switching times and at frequencies up to 10MHz. Depending on the output current rating, these gate drivers are offered in DFN (56), SOIC (54), Power SOIC (53), DIP (20), TO-220 (57), and TO-263 (58) packages. “F” versions include one inverting driver and one non-inverting driver, “I” versions are inverters, “N” versions are non-inverters, and “D” versions are non-inverters that include an enable function.

Features
  • 1.5A to 30A Peak Source / Sink Drive Current
  • Wide Operating Voltage Range: 4.5V to 35V
  • -40C to +125C Extended Operating Temperature Range
  • Logic Input Withstands Negative Swing of up to -5V
  • Matched Rise and Fall Times
  • Low Propagation Delay Times
  • Low 10uA Supply Current
  • Low Output Impedance
Applications
  • Efficient Power MOSFET and IGBT Switching
  • Switch Mode Power Supplies
  • Motor Controls
  • DC to DC Converters
  • Class-D Switching Amplifiers
  • Pulse Transformer Driver
Part Number Package / Case Supply Voltage - Min Supply Voltage - Max Supply Current Rise Time Fall Time Data Sheet








Loading First Previous Next Last

IXYS IX2127 High-Side MOSFET & IGBT Gate Driver whose high voltage level-shift technique enables it to operate at up to 600V. Proprietary common-mode design techniques provide stable operation in high dV/dt noise environments. The IX2127 detects an over-current condition in the driven MOSFET or IGBT device, and shuts down drive to that device. An open-drain output, FAULT, indicates that an over-current shutdown has occurred. The gate driver output typically can source 250mA and sink 500mA, which is suitable for fluorescent lamp ballast, motor control, SMPS, and other converter drive topologies. Available in 8-pin DIP and 8-pin SOIC packages.


IXYS High-Side MOSFET & IGBT Gate Drivers
Order IXYS IX2127 High-Side MOSFET & IGBT Gate Driver View Product Detail
Features
  • Floating Channel Designed for Bootstrap Operation up to 600V
  • Tolerant to Negative Transient Voltages; dV/dt Immune
  • Undervoltage Lockout
  • 3.3V, 5V, and 12V Input Logic Compatible
  • Open-Drain FAULT Indicator Pin Shows Over-Current Shutdown
  • Output in Phase with the Input
Applications
  • High Speed Gate Driver
  • Motor Drive Inverter

Additional Resources

Datasheet Datasheet

IXYS IX2113/IX21844 High-Side & Low-Side MOSFET and IGBT Gate Driver ICs are a high voltage integrated circuit that can drive high speed MOSFETs and IGBTs that operate at up to +600V. They are configured with independent high-side and low-side referenced output channels, both of which can source and sink up to 2A. The floating high-side channel can drive an N-channel power MOSFET or IGBT 600V from the common reference. Manufactured on IXYS Integrated Circuits Division's proprietary high-voltage BCDMOS on SOI (silicon on insulator) process, these drivers are extremely robust, and are virtually immune to negative transients. The UVLO circuit prevents the turn-on of the MOSFET or IGBT until there is sufficient VBS or VCC supply voltage. Propagation delays are matched for use in high frequency applications.

IXYS IX2113/IX21844 High-Side & Low-Side MOSFET and IGBT Gate Driver ICs
Order IXYS IX2113/IX21844 High-Side & Low-Side MOSFET and IGBT Gate Driver ICs View Product List
Features
  • Floating Channel for Bootstrap Operation up to 600V with an Absolute Maximum Rating of 700V
  • Outputs Capable of Sourcing and Sinking up to 2A
  • Gate Drive Supply Range From 10V to 20V
  • Tolerant to Negative Voltage Transients: dV/dt Immune
  • 3.3V and 5V Logic Compatible
  • Undervoltage Lockout for Both High-Side and Low-Side Outputs
  • Matched Propagation Delays
Applications
  • Switch Mode Power Supply
  • Motor Driver Inverter
  • DC/DC Converter
  • Uninterruptible Power Supplies (UPS)
Part Number Package / Case Supply Voltage - Min Supply Voltage - Max Supply Current Rise Time Fall Time Data Sheet








Loading First Previous Next Last

IXYS Optically Isolated MOSFET Gate Drivers couple infrared light emitting diodes with proprietary photovoltaic integrated circuits. In addition to providing voltage for turn-on of discrete MOSFETs, these patented IC feature a gate-clamping circuit to provide fast turn-off. These devices offer a significant reduction in drive circuit complexity, board space, and cost over alternate techniques for isolated switching of MOSFETs. Used in conjunction with discrete MOSFETs, these devices are ideal for use in programmable controls, process control, instrumentation and telecommunications, replacing TRIAC/driver, mechanical relays, and bipolar components.

IXYS Optically Isolated MOSFET Gate Drivers
Order IXYS MOSFET & IGBT Gate Drivers View Product List
Features
  • Optically-Isolated Input to Output
  • May be Configured for AC and DC Switching
  • 5mA Control Current
  • No EMI/RFI Generation
  • Machine Insertable, Wave Solderable
  • Surface Mount Tape and Reel Versions Available
  • Replacement of Discrete Components
  • Solid State Reliability
  • VDE Compatible
Applications
  • MOSFET Driver
  • Programmable Control
  • Process Control
  • Instrumentation
  • Telecommunications
Sign-Up for New Product Announcements from Mouser
  • IXYS