Contact Mouser (USA)  (800) 346-6873     |     Feedback        
View Cart     |     Change Location  USD
United States United States

Please confirm your currency selection:

US Dollars
Home » NEWEST Products » New by Manufacturer » Hirose Electric » Hirose HR30 Connectors
NEWEST Products
Hirose Logo

Hirose Miniature Waterproof Plastic Connectors

HR30 Series*

Hirose Electric HR30 Miniature Waterproof Plastic Connectors are rated IP67 for complete protection against dust and water penetration when submerged one meter deep for half hour. The HR30 connectors are short in length when fully terminated and mated and feature a built-in lock/release mechanism that securely locks the mated connectors while allowing a quick disconnect by simply pulling on the plug 's release collar. The Hirose Electric HR30 Miniature Waterproof Plastic Connectors are user friendly with molded-in grooves to prevent hand slippage, permanent colored alignment indicators, and multiple polarizing keys to protect from misalignment or insertion of the wrong connector.

View all Hirose Electric LED Connectors

*Overmolding required.

* Hirose has introduced an Overmold version of the HR30 Miniature Waterproof Plastic Connectors. With the same benefits and features as the HR30, once overmolded this version provides a waterproof structure suitable for cable harness cleaning.

Hirose Electric HR30 Miniature Waterproof Plastic Connectors Overmold Version


View Products List
HR30 Features
  • Small size - Short in length when fully terminated and mated.
  • Water and dust protected - IP67 protection rating: Complete protection against dust penetration and against water penetration when submerged 1 meter deep for half hour. Mated with corresponding connector or protective cap.
  • Simple pull lock release - Built-in lock/release mechanism securely locks mated connectors while allowing quick disconnection by simply pulling on the plug ’s release collar. Molded-in grooves prevent hand slippage when pulled. The round configuration of the collar allows easy side-by-side panel mounting and will not snag on objects when the cable is pulled-out.
  • Light weight, corrosion resistant - Glass reinforced thermoplastic compounds and noncorrosive components are used in all assemblies.
  • Contact protection and self-alignment - Multiple polarizing keys protect the contacts from mis-alignment or attempted insertion of the wrong connector , while assuring correct mating between the corresponding connectors.
  • Visual alignment indicators - Permanent alignment indicators in a contrasting color on all connectors aid in correct alignment and engagement.
  • Built-in cable strain relief

HR30 Applications

Test and measuring equipment, portable devices, instrumentation, industrial devices, recreational equipment, I/O applications and other applications requiring use of lightweight, corrosion resistant quick mate/ release cable connections.

Hirose HR30 Push-pull single action

View Products List
Datasheet


Hirose HR30 Waterproof Connectors

Mated Dimensions
HR30 mated dimensions

Product Specifications
Current Rating
Voltage Rating
Operation Temperature Range
5A (3 pos.) 100V AC,140V DC (3,6 pos.)
30V AC,42V DC (10,12 pos.)
-25ºC to +85ºC
Characteristic Specification Conditions
Contact resistance
5m ohms max. (3 pos.)
15m ohms max. (Solder type: 6, 10, and 12 pos.)
30m ohms max. (Through hole type: 6 and 12 pos.)
1A DC
Insulation resistance
1000M ohms min.
100 V DC
Withstanding voltage
No flashover or insulation breakdown
300 V AC / one minute
Vibration No electrical discontinuity of 10 µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
1 cycle= 5min, 10 cycles in each of the 3 directions.
Durability (mating/un-mating) Contact resistance 10m ohms min.(3 pos.)
Contact resistance 30m ohms min. (Solder type: 6, 10, and 12 pos.)
Contact resistance 100m ohms min. (Through hole type: 6 and 12 pos.)
1000 cycles
Temperature cycle
Insulation resistance 100 M ohms min.
(-55ºC: 30 minutes --> Room temperature: 10 to 15 minutes --> +85ºC: 30 minutes --> Room temperature: 10 to 15 minutes) for 5 cycles
Humidity resistance
Insulation resistance:
10M ohms min. (when humidity high)
100M ohms min. (when dry)
96 hours at temperature of 40ohmsC and humidity of 90% to 95%
Waterproof performance
No penetration inside
While mated with corresponding or protective cap submerged at depth of 1m for half hour
Dust protection
Material
Assembly Component Material Finish Remarks
Plug


Insulator
PPS
Black
UL94V-0
PBT
Black
UL94V-0
Polyacetal
Natural
--
Gasket
Silicone rubber, chloroprene rubber
Red/Black
--
Contacts
Brass, phosphor bronze
Gold palted
--
Spring
Stainless steel
-- --
Receptacles
Insulator
PPS
Black
UL94V-0
Gasket
Chloroprene rubber
Black --
Contacts
Brass, phosphor bronze
Gold plated
--
Hexagonal nut
Zinc alloy
Chromate
--
Washer
Phosphor bronze Nickel plated
--
Crimp contact
(male/female)
Contacts
Phosphor bronze
Selective gold plated
--
Ordering Information

Accessories
Hirose HR30 Accessories
Caps for Plugs
HR30-6P-C71

HR30-7P-C71

HR30-8P-C71
Hirose HR30 Accessories
Caps for Receptacle
HR30-6R-C71

HR30-7R-C71
Hirose HR30
Hirose HR30 Backshell











  • Hirose Electric
  • Connectors|Connector-Circular