Contact Mouser (USA)  (800) 346-6873     |     Feedback        
View Cart     |     Change Location  USD
United States United States

Please confirm your currency selection:

US Dollars
Home » NEWEST Products » New by Manufacturer » Greenliant » Greenliant GLS85L Commercial/Industrial Grade SATA/PATA NANDrive™
NEWEST Products
Greenliant GLS85L Commercial/Industrial Grade SATA/PATA NANDrive™

Greenliant GLS85L Commercial/Industrial Grade SATA/PATA NANDrive™

Greenliant GLS85L Commercial/Industrial Grade SATA/PATA NANDrive™ devices are high-performance, fully integrated solid state drives. They combine an integrated SATA NAND flash memory controller or ATA controller and 512MB, 2, 4, 8, 16, or 32GB of NAND flash memory in a multi-chip package. Greenliant GLS85L Commercial/Industrial Grade SATA/PATA NANDrive™ devices are ideal for solid-state mass storage in embedded and portable applications that require smaller form-factor and more reliable data storage.

Shared Features
  • Power management: Immediate disabling of unused circuitry without Host intervention
  • Expanded data protection: Added data security through user-selectable protection zones
  • 20-Byte unique ID for enhanced security
    • Factory pre-programmed 10-Byte unique ID
    • User-programmable 10-Byte ID
  • Integrated voltage detector detects supply voltage fluctuations and generates reset during power-up and powerdown to prevent inadvertent writes
  • Robust built-in ECC
  • All devices are RoHS compliant
Commercial Grade SATA NANDrive Features
  • Industry Standard Serial ATA (SATA) Host Interface
    • SATA 1.5Gb/s or SATA 3.0Gb/s
    • ATA/ATAPI-8 compliant
    • Supports 48-bit address feature set
  • Performance
    • Sustained sequential data read: Up to 70MB/sec*
    • Sustained sequential data write: Up to 30MB/sec*
      * measured using 128kB block size
  • Power management
    • 3.3V and 1.2Vpower supply
    • Host SATA interface power management
  • Power specifications
    • Active mode:
      945mW typical (GLS85LS1032A)
      650mW typical (GLS85LS1016A)
      490mW typical (GLS85LS1008A)
      400mW typical (GLS85LS1004A)
    • Idle mode: 210mW typical
    • Standby mode: 100mW typical
  • Supports SMART Commands
  • Commercial temperature range: 0°C to 70°C
  • FBGA package: 14.0mm x 24.0mm x 1.95mm, 145-ball, 1.0mm ball pitch, FZJE
Industrial Grade PATA NANDrive Features
  • Industry Standard ATA / IDE Bus Interface
    • Host Interface: 16-bit access
    • Supports up to PIO Mode-6
    • Supports up to Multi-Word DMA Mode-4
    • Supports up to Ultra DMA Mode-4
  • Performance
    • Sustained sequential data read: Up to 50MB/sec
    • Sustained sequential data write: Up to 39MB/sec
  • Power management
    • 3.3V power supply
    • Zero wake-up latency
  • Power specification
    • Active mode
      110mA typical (GLS85LP1008P)
      60mA typical (GLS85LP1002P)
      60mA typical (GLS85LP0512P)
    • Sleep mode
      500 A typical (GLS85LP1008P)
      450 A typical (GLS85LP1002P)
      450 A typical (GLS85LP0512P)
  • Expanded data protection
    • WP#/PD# pin configurable by firmware for prevention of data overwrites
    • Security Erase feature
  • Pre-programmed embedded firmware
    • Executes industry standard ATA/IDE commands
    • Implements advanced wear-leveling algorithms to substantially increase the longevity of flash media
    • Embedded Flash File System
  • Industrial temperature range: -40°C to 85°C
  • 91-ball BGA and LBGA packages
    • 14mm x 24mm x 1.90mm (GLSLP1002P / 1008P)
    • 12mm x 24mm x 1.40mm (GLSLP0512P)
SATA NANDrive Block Diagram

SATA NANDrive Block Diagram

PATA NANDrive Block Diagram

PATA NANDrive Block Diagram

  • Greenliant
  • Semiconductors|Embedded Processors|IC-Memory