Contact Mouser (USA)  (800) 346-6873     |     Feedback        
View Cart     |     Change Location  USD
United States United States

Please confirm your currency selection:

US Dollars
Home » NEWEST Products » New by Manufacturer » FCI » FCI 1.25mm Wire-to-Board Connectors
NEWEST Products
FCI Logo

FCI 1.25mm Wire-to-Board Connectors


FCI's 1.25mm Wire-to-Board Connector Series offers terminals, crimp housings, and PCB headers in straight and right angle, surface mount and through mount configurations that conform to the EU Industry Safety Standard and operate in temperature range from -40℃ to +105℃. Featuring a single-row design, these connectors are available with 2 to 15 circuits. RoHS compliant and UL approved, FCI 1.25mm Wire-to-Board Connectors are ideally suited for POS ticketing, industry control, motor/robot control, security, and handheld device applications.

Features
  • Operating temperature: -40°C to +105°C
  • Plating options: gold flash or tin
  • Circuits: #2- #15 positions available, extension up to 20 positions
  • Current rating: 1 Amp
  • Polarized Mating Geometry: crimping housing is polarized to prevent mis-mating with PCB header
  • Friction lock: crimping housing is equipped with friction locks to secure retention force with PCB header
  • PCB header material (resin) meets halogen-free requirement
  • Housing meets EU Industry Safety Standard
  • RoHS compliance and UL approved
  • Tape and reel packaging befits pick and place of SMT production

Applications
  • POS ticketing
  • Industry control
  • Motor/robot control
  • Security
  • Handheld devices
Mechanical Specifications
  • Mating & un-mating force: conforms to EIA-364-13
  • Contact retention force: 0.5Kgf (minimum)
  • Hold down/Housing retention force: 1.0Kgf (minimum)
  • Wire retention force: 0.5Kgf (minimum)
  • Terminal/ Housing retention force: 0.5Kgf (minimum)
  • Shock: 1μs (maximum), EIA-364-27A
  • Durability: 30 cycles

Electrical Specifications
  • Contact Resistance: 20m (maximum)
  • Insulation Resistance: 100M (minimum)
  • Voltage Rating: 125 Volts AC,DC
  • Current Rating: 1 Amp (0.8 A --32 AWG)
  • Dielectric Withstand Voltage: 500 VAC/minute

Physical Specifications
  • Contact: copper alloy
    • Plating: matt tin or gold flash over nickel
    • Housing: Thermoplastic or Thermoplastic high temperature, UL94V-0
  • Metal hold down: copper alloy
    • Plating: matt tin
  • Housing connector conforms to IEC 60695-2 Industry Safety Standard (Glow Wire test)

  • FCI
  • Connectors|Connector-Rectangular