Amprobe SOLAR-500 Solar Analyzer
 The Amprobe Professional SOLAR-500 Solar Analyzer is ideal for testing, maintenance, troubleshooting, and efficiency of solar panels. The SOLAR-500 analyzer is used in the installation of solar panels to determine the proper inverter size, optimum power output position of panels and identifies broken or worn-out cells.
 View Product Detail
Features
- I-V Curve test for solar cell
- Maximum Solar Power (Pmax) search by auto-scan (60V, 6A)
- Maximum Voltage (Vmaxp) at Pmax
- Maximum Current (Imaxp) at Pmax
- Voltage at open circuit (Vopen)
- Current at short circuit (Ishort)
- I-V curve with cursor
- Calculation of panel efficiency (%)
- Manual single point test
Specifications
- DC Voltage
- Range: 0~6V / 6~10V / 10~60V
- Resolution: 0.001V / 0.001V / 0.01V
- Accuracy: ±1% ± (1% of Vopen ± 9 mV) / ±1% ± (1% of Vopen ± 0.09 V) / ±1% ± (1% of Vopen ± 0.09 V)
- DC Current
- Range: 0~0.6A / 0.6~1A / 1~6A
- Resolution: 0.1mA / 0.1mA / 1mA
- Accuracy: ±1% ± (1% of Ishort ± 0.9 mA) / ±1% ± (1% of Ishort ±9 mA) / ±1% ± (1% of Ishort ±9 mA)
- General Specifications
- Battery Type: 1.2V AA rechargeable battery x 8 (2500mAh)
- AC Adaptor: AC 110V or 220V input, DC 12V/3A output
- Dimension: 257(L) x 155(W) x 57(H) mm (10.1 x 6.1 x 2.2 in)
- Weight: 1160 g (2.6 lb) (Batteries included)
- Operation Environment: 0°C to 50°C (32°F to 122°F), 85% RH
- Temperature Coefficient: 0.1% of full scale / °C (< 18°C or > 28°C)
- Storage Environment: -20°C to 60°C (-4°F to 140°F), 75% RH
- Accessories Users manual x 1, Software Manual x 1, 1.2V AA rechargeable batteries x 8 , AC adaptor x 1,
RS232C (to USB Bridge) cable x 1, Software CD x 1, Kelvin Clips (6A max) x 1 set
|
Amprobe SOLAR-100 Meter
 The Amprobe SOLAR-100 measures solar output that is used to calculate overall energy, efficiency, and placement of solar systems.
View Product Detail
Features
- Measures the solar power and transmission up to 2000 W/m2, 634BTU / (ft2xh)
- Power Mode - measurement of the power per unit area of incident solar radiation
- Transmission Mode - calculates the solar power transmission percentage of the material for example how much solar power in % will be transmitted through the window
- Convenient to read display with remote sensor technology
- Selectable measurement units either W/m2 or BTU / ( ft2 x h)
- Data Hold
- MAX/MIN functions to indentify locations with maximum or minimum power
Applications
- Windows performance - calculation and verification of the heating or heat reduction caused by direct sunlight
- Solar radiation measurements
- Solar power research for location of the solar panels or solar water heater
- Physics and optical laboratories
- Meteorology
- Agriculture
Specifications
- Display: 3½ digits, 2000 readings
- Range: 1999 W/m2, 634BTU / (ft2xh)
- Accuracy: Typically within +/- 10W/m2 [+/-3 BTU/ (ft2xh)] or +/- 5% whichever is greater in sunlight
Additional temperature included error +/- 0.38 W/m2 / º C [+/-0.12 BTU/ (ft2xh)] / º C] from 25 º C
- Angular Accuracy: Cosine corrected < 5% for angles < 60º
- Drift: < +/- 2% per year
- Over-input: Display "OL"
- Sampling Time: Approx 0.25 second
- Operating Temp. & Humidity: 5ºC to 40ºC (41ºF to 104ºF)below 80% RH
- Dimensions: 132(L) x 60(W) x 38(H) mm (5.2 x 2.4 x 1.5 in)
- Weight: About 150g (0.3 lb)
- Battery: 1 X 9V Alkaline Battery (NE DA 1604A, IE C 6LR61) included
|
