|    Change Country Change Location USD
United States United States

Please confirm your currency selection:

US Dollars
Home » NEWEST Products » New by Manufacturer » Texas Instruments » SN75LVCP601 Two-Channel SATA 6Gb/s Redriver - TI
NEWEST Products
Texas Instruments SN75LVCP601 Two-Channel SATA 6Gb/s Redriver

TI SN75LVCP601 Two-Channel SATA 6Gb/s Redriver

Texas Instruments SN75LVCP601 Two-Channel SATA 6Gb/s Redriver and Signal Conditioner supports data rates up to 6Gbps. This TI device complies with SATA physical link 2m and 3i specifications. SN75LVCP601 dual-channel SATA redriver operates from a single 3.3V supply and has 100Ω line termination with a self-biasing feature, making the device suitable for AC coupling. The inputs incorporate an out-of-band (OOB) detector that automatically squelches the output while maintaining a stable common-mode voltage compliant to the SATA link. SN75LVCP601 is also designed to handle spread-spectrum clocking (SSC) transmission per the SATA specification. SN75LVCP601 handles interconnect losses at both its input and output. The input stage of each channel offers selectable equalization settings that can be programmed to match the loss in the channel. The differential outputs provide selectable de-emphasis to compensate for the distortion that the SATA signal is expected to experience. The level of equalization and de-emphasis settings depends on the length of interconnect and its characteristics.

  • 1.5/3/6Gbps Two-Channel Redriver
  • Integrated Output Squelch
  • Programmable Rx/Tx Equalization and De-Emphasis Width Control
  • Power-Save Feature Lowers Power by >80% in Auto Low-Power Mode
  • Low Power
    • <220mW Typ.
    • <50mW (in Auto Low-Power Mode)
    • <5mW (in Standby Mode)
  • Excellent Jitter and Loss Compensation Capability to
  • Over 24-Inch (61-cm) FR4 Trace
  • 20-Pin 4mm × 4mm QFN Package
  • High Protection Against ESD Transient
    • HBM: 10,000V
    • CDM: 1,500V
    • MM: 200V
  • Pin-Compatible to LVCP412A/MAX4951
  • Notebooks
  • Desktops
  • Docking Stations
  • Servers
  • Workstations

SN75LVCP601EVM Evaluation Module

Texas Instruments SN75LVCP601EVM Evaluation Module is designed to facilitate easy evaluation of the LVCP601 using internal SATA connectors. Physical switches allow for simple configuration of the equalization, de-emphasis, and operation mode settings of the LVCP601. The EVM board has two internal SATA connectors. One is for the host side and one is for the device side of the redriver. This module also runs on a 3V supply voltage that is derived from the standard SATA power connection.

  • Plug and Play design
  • No external power required
  • All device configuration pins accessible
Additional Resources
User's Guide User's Guide

Data Flow Block Diagram
Data Flow Block Diagram
Typical Application
Typical Application
  • Texas Instruments