|    Change Country Change Location USD
 
United States United States

Please confirm your currency selection:

US Dollars
Home » NEWEST Products » New by Manufacturer » Texas Instruments » CC3100 & CC3200 SimpleLink Wi-Fi Processors & Dev Tools - TI
NEWEST Products
Texas Instruments CC3100 & CC3200 SimpleLink Wi-Fi Processors

Texas Instruments CC3100 & CC3200 SimpleLink™ Wi-Fi Processors,
Modules & Development Tools

Texas Instruments CC3100 and CC3200 SimpleLink™ Wi-Fi Processors move nearly all functions required for Wi-Fi and networking off of the host processor. The CC3100 & CC3200 contains an on-chip WLAN and TCP/IP stack, as well as the SimpleLink™ connection manager, Embedded Crypto Engine with 256-bit encryption, and WPA security. The CC3100 & CC3200 SimpleLink™ Wi-Fi Processors are ideal for home automation, smart energy, multimedia devices, security and safety devices, and industrial M2M applications.

Texas Instruments CC3100BOOST SimpleLink™ Wi-Fi BoosterPack

Texas Instruments CC3100BOOST SimpleLink Wi-Fi CC3100 solution allows customers the flexibility to add Wi-Fi to any microcontroller (MCU). Internet on a chip contains all you need to easily create IoT solutions - security, quick connection, cloud support and more. The CC3100 Boosterpack can be used in three main ways: to connect to TI MCU Launchpad (software examples provided for MSP-EXP430F5529LP); with CC31XXEMUBOOST connect to a PC for MCU Emulation using SimpleLink Studio; and this kit can also be connected up to other platforms through pins (use the Programming Guide for instructions on porting driver and sample code).

Features
  • 2x20 pin stackable connectors
  • On-board chip antenna with option for U.FL based conducted testing
  • Power from on-board LDO using USB OR 3.3V from MCU Launchpad
  • Push buttons (2x)
  • LEDs (4x)
  • Jumper with 0.1Ohm resistor for current measurement

  • 0.8 Mbit serial flash
  • 40 MHz crystal , 32KHz crystal and oscillator
  • U.FL & chip Antenna
  • USB
  • 4 Layer PCB with 6mil spacing and track width
  • Boosterpack headers

Texas Instruments CC31XXEMUBOOST SimpleLink Wi-Fi BoosterPack

CC31xxEMUBOOST & CC3100BOOST
Buy CC31xxEMUBOOST & CC3100BOOST Solution

CC31xxEMUBOOST & CC3100BOOST & MSP-EXP430F5529LP
CC31xxEMUBOOST & CC3100BOOST & MSP-EXP430FR5969 Solution

Texas Instruments CC31XXEMUBOOST Advanced Emulation Boosterpack

Texas Instruments CC31XXEMUBOOST Advanced Emulation BoosterPack is a required accessory for the SimpleLink Wi-Fi® CC3100 BoosterPack

This Advanced Emulation BoosterPack is for:


Texas Instruments SimpleLink™ Wi-Fi® CC3200MOD LaunchPad

Texas Instruments SimpleLink™ Wi-Fi® CC3200MOD LaunchPad is an evaluation development platform for the CC3200 wireless microcontroller (MCU), the industry's first single-chip programmable MCU with built-in Wi-Fi connectivity. The board features on-board emulation using FTDI and includes sensors for a full out-of-the-box experience. This board can be directly connected to a PC for use with development tools such as CCS and IAR.

Features
  • CC3200MOD Wi-Fi wireless microcontroller (MCU) module
  • CC3200 modules are Wi-Fi CERTIFIED® and FCC/IC/CE certified, which can be transferred to end products
  • CC3200MOD, SimpleLink Wi-Fi, internet-on-a-chip™ module solution with integrated MCU
  • 40-pin LaunchPad standard that leverages the BoosterPack ecosystem
  • FTDI-based JTAG emulation with serial port for Flash programming

  • Two buttons and three LEDs for user interaction
  • Backchannel universal asynchronous receiver/transmitter (UART) through USB to PC
  • On-board chip antenna with U.FL for conducted testing
  • On-board accelerometer and temperature sensor for out-of-box demo
  • Micro USB connector for power and debug connections

Texas Instruments CC3200 Simplelink™ Wi-Fi Launchpad Kit

Texas Instruments CC3200 Launchpad Kit is a development platform for the CC3200 wireless microcontroller, the industry's first single-chip programmable MCU with built-in Wi-Fi connectivity. The board features on-board emulation using FTDI device and includes sensors for a full out-of-the-box experience. This board can be directly connected to a PC using software development platforms including CCS and IAR.

This LaunchPad comes with driver support and a software development kit (SDK) with 40+ applications for Wi-Fi protocols, internet applications, and MCU peripheral examples.

Features
  • CC3200 Wi-Fi application processor
  • USB interface to PC for CCS/IAR using FTDI USB drivers
  • Flash update over the USB using SimpleLink Programmer
  • 2 20-pin connectors enables compatibility with other TI LaunchPads with added functions
  • Standalone development platform featuring sensors, LEDs and push-buttons
  • Power from USB for the LaunchPad as well as external BoosterPack
  • Operates from 2 AA alkaline batteries
  • On-board antenna and U.FL connector selectable using a capacitor re-work
  • Supports 4 wire JTAG and 2 Wire SWD
  • GNU Debugger (GDB) support over Open On chip debugger (OpenOCD)
  • BoosterPack headers

. Texas Instruments CC3100 SimpleLink™ Wi-Fi Processor

Order Texas Instruments CC3100 SimpleLink™ Wi-Fi Processor View Product Details

Additional Resources

Texas Instruments CC3100 SimpleLink™ Wi-Fi Processor

Texas Instruments CC3100 next generation SimpleLink Wi-Fi device dramatically simplifies the implementation of Internet connectivity. It is an ideal solution for embedded applications using low-cost and low-power microcontrollers with reduced board space and faster development times. CC3100 minimizes host MCU software requirements and is the ideal solution for embedded applications using any low-cost/low-power MCU, including MSP430™ and more. It is a complete platform solution including software drivers, sample applications, API guide, and user documentation.

Features
  • 802.11 b/g/n Station with fully integrated radio, baseband, and MAC
  • Auto-calibrated radio with a single-ended 50Ω interface enables easy connection to the antenna without requiring expertise in radio circuit design
  • Advanced Wi-Fi connection manager with no host processor involvement


. Texas Instruments CC3100 Wireless Network Processor Module

Order Texas Instruments CC3100 Wireless Network Processor Module View Product Details

Additional Resources

Texas Instruments CC3100 Wireless Network Processor Module

Texas Instruments CC3100 Wireless Network Processor Module allows an engineer to add Wi-Fi to low-cost, low-power microcontroller (MCU) for Internet of Things (IoT) applications. The CC3100MOD is FCC, IC, CE, and Wi-Fi CERTIFIED module that is part of the new SimpleLink Wi-Fi family that dramatically simplifies the implementation of Internet connectivity. The CC3100MOD integrates all protocols for Wi-Fi and Internet, which greatly minimizes host MCU software requirements. With built-in security protocols, the CC3100MOD solution provides a robust and simple security experience. Additionally, the CC3100MOD is a complete platform solution including various tools and software, sample applications, user and programming guides, reference designs and the TI E2E support community. The CC3100MOD is available an LGA package that is easy to lay out with all required components including serial flash, RF filter, crystal, passive components fully integrated.

The Wi-Fi network processor subsystem features a Wi-Fi Internet-on-a-Chip and contains an additional dedicated ARM MCU that completely off-loads the host MCU. This subsystem includes an 802.11 b/g/n radio, baseband, and MAC with a powerful crypto engine for fast, secure Internet connections with 256-bit encryption. The CC3100MOD module supports Station, Access Point, and Wi-Fi Direct modes. The module also supports WPA2 personal and enterprise security and WPS 2.0. This subsystem includes embedded TCP/IP and TLS/SSL stacks, HTTP server, and multiple Internet protocols. The power-management subsystem includes an integrated DC-DC converter with support for a wide range of supply voltages. This subsystem enables low-power consumption modes such as hibernate with RTC mode, which requires approximately 7μA of current. The CC3100MOD module can connect to any 8-, 16-, or 32-bit MCU over the SPI or UART Interface. The device driver minimizes the host memory footprint requirements of less than 7KB of code memory and 700B of RAM memory for a TCP client application.

Features
  • The CC3100MOD is a Wi-Fi Module that Consists of the CC3100R11MRGC Wi-Fi Network Processor and Power-Management Subsystems. This Fully Integrated Module Includes all Required Clocks, SPI Flash, and Passives.
  • Modular FCC, IC, and CE Certifications Save Customer Effort, Time, and Money
  • Wi-Fi CERTIFIED Modules, With Ability to Request Certificate Transfer for Wi-Fi Alliance Members
  • Wi-Fi Network Processor Subsystem
    • Featuring Wi-Fi Internet-On-a-Chip
    • Dedicated ARM MCU
    • Completely Offloads Wi-Fi and Internet Protocols from the External Microcontroller
    • Wi-Fi Driver and Multiple Internet Protocols in ROM
    • 802.11 b/g/n Radio, Baseband, and Medium Access Control (MAC), Wi-Fi Driver, and Supplicant
    • TCP/IP Stack
      • Industry-Standard BSD Socket Application Programming Interfaces (APIs)
      • 8 Simultaneous TCP or UDP Sockets
      • 2 Simultaneous TLS and SSL Sockets
    • Powerful Crypto Engine for Fast, Secure Wi-Fi and Internet Connections With 256-Bit AES Encryption for TLS and SSL Connections
    • Station, AP, and Wi-Fi Direct Modes
    • WPA2 Personal and Enterprise Security
    • SimpleLink Connection Manager for Autonomous and Fast Wi-Fi Connections
    • SmartConfig Technology, AP Mode, and WPS2 for Easy and Flexible Wi-Fi Provisioning
    • TX Power
      • 17 dBm at 1 DSSS
      • 17.25 dBm at 11 CCK
      • 13.5 dBm at 54 OFDM
    • RX Sensitivity
      • -94.7 dBm at 1 DSSS
      • -87 dBm at 11 CCK
      • -73 dBm at 54 OFDM

  • Application Throughput
    • UDP: 16 Mbps
    • TCP: 13 Mbps
  • Host Interface
    • Wide Range of Power Supply (2.3 to 3.6 V)
    • Interfaces With 8-, 16-, and 32-Bit MCU or ASICs Over a Serial Peripheral Interface (SPI) With up to 20MHz Clock
    • Low Footprint Host Driver: Less than 6KB
    • Supports RTOS and No-OS Applications
  • Power-Management Subsystem
    • Integrated DC-DC Converter With a Wide-Supply Voltage
      • Direct Battery Mode: 2.3 to 3.6V
    • Low-Power Consumption at 3.6V
      • Hibernate With Real-Time Clock (RTC): 7μA
      • Standby: 140μA
      • RX Traffic: 54mA at 54 OFDM
      • TX Traffic: 223mA at 54 OFDM
      • Integrated Components on Module
        • 40.0MHz Crystal With Internal Oscillator
        • 32.768kHz Crystal (RTC)
        • 8Mbit SPI Serial Flash RF Filter and Passive Components
  • Package and Operating Conditions
    • 1.27mm Pitch, 63-Pin, 20.5mm × 17.5mm LGA Package for Easy Assembly and Low-Cost PCB Design
    • Operating Temperature Range: -20°C to 70°C
Functional Block Diagram
Functional Block Diagram


Texas Instruments CC3200 SimpleLink™ Wi-Fi Processor

Order Texas Instruments CC3200 SimpleLink™ Wi-Fi Processor View Product List

Additional Resources

Texas Instruments CC3200 SimpleLink™ Wi-Fi Processor

Texas Instruments CC3200 is a wireless MCU that integrates a high-performance ARM® Cortex™-M4 MCU, running at 80MHz. It includes peripherals allowing customers to develop an entire application with a single IC. The peripheral set includes SPI, UART, I2C, I2S, SDMMC, 4 Channel ADC, 4 PWMs and built in power management. Powerful crypto engines such as AES, 3DES, SHA and CRC enable your application to safely connect to cloud based applications. The SimpleLink CC3200 solution provides a robust, easy, and secure way to develop for the Internet of Things.

Features
  • On-chip ARM® Cortex™ M4 80MHz processor allows custom APIs to be done on-chip
  • 802.11 b/g/n Station with fully integrated auto-calibrated radio, baseband, and MAC
  • Advanced Wi-Fi connection manager with no host processor involvement
  • 2xUART, 2xSPI, camera, audio, I2C, 4-ch 12-bit ADC, 4 timers, 16-bit PWM, 27 GPIOs


Texas Instruments CC3200MOD Internet-on-a-Chip Wireless MCU Module

Order Texas Instruments CC3200MOD Internet-on-a-Chip Wireless MCU Module View Product Detail

Additional Resources

Texas Instruments CC3200MOD Internet-on-a-Chip Wireless MCU Module

Texas Instruments CC3200MOD Internet-on-a-Chip Wireless MCU Module is the industry's first programmable FCC, IC, CE, and Wi-Fi Certified Wireless microcontroller (MCU) module with built-in Wi-Fi connectivity. Created for the Internet of Things (IoT), the SimpleLink CC3200MOD is a wireless MCU module that integrates an ARM Cortex-M4 MCU, allowing customers to develop an entire application with a single device. With on-chip Wi-Fi, Internet, and robust security protocols, no prior Wi-Fi experience is required for faster development. The CC3200MOD integrates all required system-level hardware components including clocks, SPI flash, RF switch, and passives into an LGA package for easy assembly and low-cost PCB design. The CC3200MOD is provided as a complete platform solution including software, sample applications, tools, user and programming guides, reference designs, and the TI E2E support community.

The device includes a wide variety of peripherals, including a fast parallel camera interface, I2S, SD/MMC, UART, SPI, I2C, and four-channel ADC. The CC3200 family includes flexible embedded RAM for code and data; ROM with external serial flash bootloader and peripheral drivers; and SPI flash for Wi-Fi network processor service packs, Wi-Fi certificates, and credentials. The Wi-Fi network processor subsystem features a Wi-Fi Internet-on-a-chip and contains an additional dedicated ARM MCU that completely off-loads the applications MCU. This subsystem includes an 802.11 b/g/n radio, baseband, and MAC with a powerful crypto engine for fast, secure Internet connections with 256-bit encryption. The CC3200MOD supports station, access point, and Wi-Fi Direct™ modes. The device also supports WPA2 personal and enterprise security and WPS 2.0. The Wi-Fi Internet-on-a-chip includes embedded TCP/IP and TLS/SSL stacks, HTTP server, and multiple Internet protocols. The power-management subsystem includes integrated DC-DC converters supporting a wide range of supply voltages. This subsystem enables low-power consumption modes, such as the hibernate with RTC mode requiring less than 7μA of current.

Features
  • The CC3200MOD is a Wi-Fi Module that Consists of the CC3200R1M2RGC Single-Chip Wireless MCU. This Fully Integrated Module Includes all Required Clocks, SPI Flash, and Passives.
  • Modular FCC, IC, and CE Certifications Save Customer Effort, Time, and Money
  • Wi-Fi CERTIFIED Modules, With Ability to Request Certificate Transfer for Wi-Fi Alliance Members
  • 1.27mm Pitch LGA Package for Easy Assembly and Low-Cost PCB Design
  • Applications Microcontroller Subsystem
    • ARM Cortex-M4 Core at 80MHz
    • Embedded Memory Options
      • Integrated Serial
      • RAM (up to 256KB)
      • Peripheral Drivers in ROM
    • Hardware Crypto Engine for Advanced Hardware Security Including
      • AES, DES, and 3DES
      • SHA and MD5
      • CRC and Checksum
    • 8-Bit, Fast, Parallel Camera Interface
    • 1 Multichannel Audio Serial Port (McASP) Interface With Support for I2S Format
    • 1 SD (MMC) Interface
    • 32-Channel Micro Direct Memory Access (μDMA)
    • 2 Universal Asynchronous Receivers/Transmitters (UARTs)
    • 2 Serial Peripheral Interfaces (SPIs)
    • 1 Inter-integrated Circuit (I2C)
    • 4 General-Purpose Timers (GPTs)
    • 16-Bit Pulse-Width Modulation (PWM) Mode
    • 1 Watchdog Timer Module
    • 4-Channel 12-Bit Analog-to-Digital Converters (ADCs)
    • Up to 25 Individually Programmable GPIO Pins
  • Wi-Fi Network Processor Subsystem
    • 802.11b/g/n Radio, Baseband, and Medium Access Control
    • TCP/IP Stack
      • 8 Simultaneous TCP, UDP, or RAW Sockets
      • 2 Simultaneous TLS v1.2 or SSL 3.0 Sockets

    • Powerful Crypto Engine for Fast, Secured WLAN Connections With 256-Bit Encryption
    • Station, Access Point, and Wi-Fi Direct Modes
    • WPA2 Personal and Enterprise Security
    • SimpleLink Connection Manager for Managing Wi-Fi Security States
    • TX Power
      • 17 dBm at 1 DSSS
      • 17.25 dBm at 11 CCK
      • 13.5 dBm at 54 OFDM
    • RX Sensitivity
      • -94.7 dBm at 1 DSSS
      • -87 dBm at 11 CCK
      • -73 dBm at 54 OFDM
    • Application Throughput
      • UDP: 16 Mbps
      • TCP: 13 Mbps
    • Power-Management Subsystem
      • Integrated DC-DC Converter With a Wide-Supply Voltage
        • VBAT: 2.3 to 3.6V
      • Low-Power Consumption at 3.6V
        • Hibernate With Real-Time Clock (RTC): 7μA
        • Low-Power Deep Sleep: <275μA
        • RX Traffic: 59mA at 54 OFDM
        • TX Traffic: 229mA at 54 OFDM
      • Additional Integrated Components
        • 40.0MHz Crystal
        • 32.768kHz Crystal (RTC)
        • 8Mbit SPI Serial Flash RF Filter and Passive Components
    • Package and Operating Conditions
      • 1.27mm Pitch, 63-Pin, 20.5mm × 17.5mm LGA Package for Easy Assembly and Low-Cost PCB Design
      • Operating Temperature Range: -20°C to 70°C
Functional Block Diagram
Functional Block Diagram

View CC3100 and CC3200 Product Videos








eNews
Mouser.com Comments

Mouser welcomes lively and courteous interaction on our website. In order to host a cooperative discussion, please keep comments relevant to the topics on this page. All comments are reviewed prior to being posted to ensure appropriate language and content is used.

  • Texas Instruments