|    Change Country Change Location USD
United States United States

Please confirm your currency selection:

US Dollars
Home » NEWEST Products » New by Manufacturer » Texas Instruments » CC1200 RF Transceiver and Tools - TI
NEWEST Products
Texas Instruments CC1200 RF Transceiver and Tools

Texas Instruments CC1200 RF Transceiver and Tools

Texas Instruments CC1200 RF Transceiver and Tools

Order Texas Instruments CC1200 RF Transceiver and Tools View Product List

Additional Resources

Texas Instruments CC1200 sub-1GHz is a fully integrated single-chip radio transceiver designed for high performance at very low power and low voltage operation in cost effective wireless systems. All filters are integrated, removing the need for costly external SAW and IF filters. This TI device is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 164-190MHz, 410-475MHz, and 820-950MHz. Evaluation module kits and a development kit are available for easy assessment of this TI RF transceiver.

  • High performance single chip transceiver
    • Excellent receiver sensitivity:
      • 123dBm at 1.2 kbps
      • 110dBm at 50 kbps
    • Blocking performance: 86dB at 10MHz
    • Adjacent channel selectivity: up to 60dB at 12.5kHz offset
    • Very low phase noise: –114dBc/Hz at 10kHz offset (169MHz)
  • Programmable output power up to +16dBm with 0.4dB step size
  • Automatic output power ramping
  • Supported modulation formats: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, MSK, OOK
  • Supports up to 1.25 Mbps data rate in transmit and receive
  • Low current consumption:
    • Enhanced Wake-On-Radio functionality for automatic low-power receive polling
    • Power down: 0.3µA (0.5µA with sleep timer active)
      • RX: 2mA in RX Sniff Mode
      • RX: 19mA peak current in low power mode
      • RX: 23mA peak current in high performance mode
      • TX: 46mA at +14dBm
  • Low power, high performance, wireless systems with up to 1250kbit/s data rate
  • 169/433/868/915/920 MHz ISM/SRD bands
  • Possible support for additional frequency bands: 137–158.3, 205–237.5, and 274–316.6MHz
  • Smart Metering (AMR/AMI)
  • Home and building automation
  • Wireless alarm and security systems
  • Industrial monitoring and control
  • Wireless healthcare applications
  • Wireless sensor networks and Active RFID
  • IEEE 802.15.4g applications
  • Wireless M-Bus, all modes

Block Diagram

Block Diagram
Texas Instruments CC1200 Development Kit

Order Texas Instruments CC1200 Development Kit View Product Details

Additional Resources

TI CC1200 development kit provides a complete platform for hardware performance testing and software development for TI's sub-1 GHz CC1200 device. The development kit comes pre-programmed with a packet error rate test for easy out-of-the-box evaluation of the RF performance of the device. RF range and robustness can be tested with different RF settings, and power consumption can be measured easily. This kit supports the frequency range from 868 to 930 MHz. Additional plug-in boards (EMK) can be purchased separately to support other frequencies. The kit includes the SmartRF Transceiver Evaluation Board (TrxEB), which has a number of useful features for development of prototype software, as well as USB connectivity making it possible to connect the board to a PC and control the radio from SmartRF Studio.

  • 2 x SmartRF Transceiver EB (TrxEB)
  • 2 x CC1200EM 868-930 MHz
  • 2 x Pulse Antennas
  • 1 x MSP-FET430UIF (MSP430 debugger)
  • Documentation

TrxEB Overview
TrxEB Overview
Range and Coexistence Demo in a sub-1GHz Environment
TI Video video platformvideo managementvideo solutionsvideo player

The Importance of Range and Coexistence
TI Video video platformvideo managementvideo solutionsvideo player
eNews sign-up
  • Texas Instruments