Contact Mouser (USA)  (800) 346-6873     |     Feedback        
View Cart     |     Change Location  USD
United States United States

Please confirm your currency selection:

US Dollars
Home » NEWEST Products » New by Manufacturer » Swissbit » Industrial slimSATA Solid State Drives (SSD) - Swissbit
NEWEST Products
Swissbit x-200s Industrial slimSATA Solid State Drives (SSD)

Swissbit x-200s Industrial slimSATA
Solid State Drives (SSD)

Swissbit's x-200s Industrial slimSATA Solid State Drives (SSD) are small form factor 54mm x 39mm x 4mm non-volatile memory drives which provide high capacity data storage. They have a standard combined connector with SATA and power/control part. The connector is in the plane of the connector as specified in the JEDEC MO-297 specification. The card works at a supply voltage of 5V with an optional 3.3V available. The drive with the SATA interface operates in Mode 2.0 (1.5 or 3.0 Gb/s burst). The drive has an internal intelligent controller which manages interface protocols, data storage and retrieval as well as hardware BCH-code Error Correction Code (ECC), defect handling, diagnostics and clock control. The wear leveling mechanism assures an equal usage of the Flash memory cells to extend the life time. The hardware BCH-code ECC allows to detect and correct 8 random bits per 528 Bytes. The drive has a voltage detector and a powerful power-loss management feature to prevent data corruption after power-down.

Features
  • Form factor:
    • Full-sized mSATA form factor
    • JEDEC MO-297 sized Solid State Drive (SSD)
    • 54mm x 39mm x 4mm
    • 7+15 pin (SATA+power) SATA connector
    • Replacement of a standard SATA-compliant HDD
  • Interface:
    • SATA Rev 2.6 - 3Gbit/s (1.5Gbit/s compatible)
  • Highly-integrated memory controller
    • Max. UDMA6 supported
    • Max. PIO mode 4, MDMA2 supported
    • SLC NAND Flash
    • Hardware BCH-code ECC (8 Bit correction per sector for SLC)
    • Fix drive configuration
  • Low-power CMOS technology, less than 500mA (1.5W) max
  • 2 Voltage types available
    • 5.0V ± 10% power supply for standard types
    • 3.3V ± 5% power supply for types with “-3V3” part number ending
  • Optional activity LED, write protect and Quick erase switch on request
  • No mechanical noise

  • Wear Leveling: active wear leveling of static and dynamic data, assures that dynamic data as well as static data is balanced evenly across the memory; maximum write endurance of the device is guaranteed
  • High reliability
    • MTBF > 2,500,000 hours
    • Data reliability: < 1 non-recoverable error per 1014 bits read
    • Number of connector insertions/removals: >1,000
  • High performance
    • Up to 300MB/s burst transfer rate in SATA II - 3.0Gb/sec
    • Sustained Write performance: up to 95MB/s
    • Sustained Read Performance: up to 120MB/s
  • Available densities
    • 2GByte up to 64GByte (SLC NAND Flash)
  • S.M.A.R.T., HPA, Security and 48bit feature set
  • 2 Temperature ranges
    • Commercial Temperature range 0 … +70°C
    • Industrial Temperature range -40 … +85°C
  • Life Cycle Management
  • Controlled BOM
  • RoHS compatible
  • Swissbit