|    Change Country Change Location USD
United States United States

Please confirm your currency selection:

US Dollars
Home » NEWEST Products » New by Manufacturer » Swissbit » Industrial mSATA SSD Modules - Swissbit
NEWEST Products
Swissbit Industrial mSATA & SlimSATA SSD Modules

Swissbit x200m Industrial mSATA SSD Modules

Swissbit's x-200m Industrial mSATA Solid State Drives (SSD) are small form factor 50.8mm x 29.85 mm x 3.3mm) non-volatile memory drives which provide high capacity data storage. The SSDs are designed after the JEDEC MO-300 full size standard. They have a standard combined connector with SATA and power/control part. The connector is mechanical identical with eeePC card connector, but has different pinout. The card works at a supply voltage of 3.3V. The drive with the SATA interface operates in Mode 2.0 (1.5 or 3.0 Gb/s burst). The drive has an internal intelligent controller which manages interface protocols, data storage and retrieval as well as hardware BCH-code Error Correction Code (ECC), defect handling, diagnostics and clock control. The wear leveling mechanism assures an equal usage of the Flash memory cells to extend the life time. The hardware BCH-code ECC allows to detect and correct 8 random bits per 528 Bytes. The drive has a voltage detector and a powerful power-loss management feature to prevent data corruption after power-down.

  • Form factor:
    • Full-sized mSATA form factor
    • JEDEC MO-300 full size Solid State Drive (SSD)
    • 50.8mm x 29.85mm x 3.3mm
    • 52 pin PCI Express (PCIe) mini-connector (SATA II)
  • Interface:
    • SATA Rev 2.6 - 3Gbit/s (1.5Gbit/s compatible)
    • Mechanical identical to mini-PCIe and eeePC card connector, but different pinout
  • Highly-integrated memory controller
    • Max. UDMA6 supported
    • Max. PIO mode 4, MDMA2 supported
    • SLC NAND Flash
    • Hardware BCH-code ECC (8 Bit correction per sector for SLC)
    • Fix drive configuration
  • Low-power CMOS technology
  • 3.3V ± 5% power supply
  • Optional activity LED and write protect switch on request
  • No mechanical noise

  • Wear Leveling: active wear leveling of static and dynamic data, assures that dynamic data as well as static data is balanced evenly across the memory; maximum write endurance of the device is guaranteed
  • High reliability
    • MTBF > 2,500,000 hours
    • Data reliability: < 1 non-recoverable error per 1014 bits read
  • High performance
    • Up to 300MB/s burst transfer rate in SATA II - 3.0Gb/sec
    • Sustained Write performance: up to 95MB/s
    • Sustained Read Performance: up to 120MB/s
  • Available densities
    • 2GByte up to 64GByte (SLC NAND Flash)
  • S.M.A.R.T. support
  • 2 Temperature ranges
    • Commercial Temperature range 0 … +70°C
    • Industrial Temperature range -40 … +85°C
  • Life Cycle Management
  • Controlled BOM
  • RoHS compatible

Additional Resources

X-200m Product Brief
Security and Monitoring Features

Part Number

Active Mode
Supply Voltage
SFSA8192U1BR4TO-I-DT-226-STD Datasheet Datasheet 8GB 280mA, 400mA 110MB/s 87MB/s 3.135V to 3.465V
SFSA16GBU1BR4TO-I-QT-226-STD 16GB 280mA, 400mA 110MB/s 87MB/s 3.135V to 3.465V
SFSA32GBU1BR4TO-I-NC-226-STD 32GB 280mA, 400mA 93MB/s 76MB/s 3.135V to 3.465V

  • Swissbit