Contact Mouser (USA)  (800) 346-6873     |     Feedback        
View Cart     |     Change Location  USD
United States United States

Please confirm your currency selection:

US Dollars
Home » NEWEST Products » New by Manufacturer » Swissbit » Industrial CompactFlash Cards - Swissbit
NEWEST Products
Swissbit Industrial CompactFlash™ Cards

Swissbit Industrial CompactFlash™ Cards

Swissbit's Industrial CompactFlash™ Cards are small form factor, non-volatile memory cards which provide high capacity data storage. They are designed to capture, retain, and transport data, audio, and images, facilitating the transfer of all types of digital information between a large variety of digital systems. These cards operate in three basic modes: PC card ATA I/O mode, PC card ATA memory mode, and True IDE mode. The CompactFlash also supports Advanced Timing modes.  Advanced Timing modes are ATA I/O modes that are 100ns or faster, and ATA Memory modes that are 100ns or 80ns.  These CompactFlash cards conform to the PCMCIA Card Specification 2.1 when operating in the ATA I/O mode, and in the ATA Memory mode (Personal Computer Memory Card International Association standard, JEIDA in Japan), and to the ATA specification when operating in True IDE Mode. CompactFlash Cards can be used with passive adapters in a PC-Card Type II or Type III socket.

Swissbit C300L CompactFlash™ Cards

Order Swissbit C300L CompactFlash™ Cards View Product List

Additional Resources

Swissbit C300L CompactFlash™ Cards

Swissbit's C-300L Industrial CompactFlash™ Cards are designed with longevity in mind. It uses special components with a long term commitment of up to 10 years. They allow for an optimized TCO model for critical applications or high qualification investments. The C-300L features life time monitoring, to enable users to access the devices detailed life time status and predict failure, in order to avoid unexpected data loss. It is also read-only optimized to guarantee highest possible data retention and less read disturb. The wear leveling mechanism assures an equal usage of the Flash memory cells to extend the life time. Once configured by the host, these cards behave as a standard ATA (IDE) disk drive. The cards also have a voltage detector and a powerful power-loss management feature to prevent data corruption after power-down.

Features
  • Highly-integrated memory controller
    • Fully compliant with CompactFlashTM specification 3.0, compatible with specification 4.1
    • Fully compatible with PCMCIA specification
    • PC Card ATA Interface supported
    • True IDE mode compatible
    • Up to PIO mode 6 supported
    • Up to MDMA4 supported
    • Up to UDMA4 supported
    • Hardware RS-code ECC(4Bytes/528 Bytes correction)
    • Fix drive (IDE mode) & removable drive (PCMCIA mode) as default in the same card
  • Small form factor: CFC Type I (36.4x 42.8 x 3.3mm)
  • Low-power CMOS technology
  • 3.3V or 5.0V power supply
  • Power saving mode (with automatic wake-up)
  • S.M.A.R.T. support by *-SMA product type
  • Wear Leveling: Equal wear leveling of static and dynamic data. The wear leveling assures that dynamic data as well as static data is balanced evenly across the memory. With that the maximum write endurance of the device is guaranteed.
  • Data Retention: 10 year (JESD47)
  • Patented power-off reliability
    • No data loss of older sectors
    • Max. 16 sectors data loss (old data kept) for 2k Page flash respectively
    • All data written to the flash if card status is ready after write command

  • High reliability
    • Best available SLC NAND Flash technology
    • Designed for embedded market
    • MTBF: >3,000,000 hours
    • Data reliability: <1 non-recoverable error per 1014 bits read
    • Number of insertions: >10,000
  • Hot swappable in PCMCIA modes
  • High random performance
    • Up to 66MB/s burst transfer rate in UDMA4
    • Optimized for random access >150kB/s
    • Sustained Read/Write performance: up to 38/20MB/s (UDMA4)
  • Available densities: 128MB to 8 GBytes (SLC NAND Flash)
  • Operating System support: Standard Software Drivers operation CompactFlashTM
  • 2 Temperature ranges
    • Commercial Temperature range: 0 ... +70°C
    • Industrial Temperature range: -40 ... +85°C
  • Controlled BOM
  • RoHS compliant
  • Long term support

Swissbit's C-300/320 Industrial CompactFlash™ Cards have an internal intelligent controller which manages interface protocols, data storage and retrieval as well as hardware RS-code Error Correction Code (ECC), defect handling, diagnostics and clock control. The wear leveling mechanism assures an equal usage of the Flash memory cells to extend the life time. Once configured by the host, these cards behave as a standard ATA (IDE) disk drive. The hardware RS-code ECC allows to detect and correct 4 symbols per 528 Bytes. The cards also have a voltage detector and a powerful power-loss management feature to prevent data corruption after power-down.

Features
  • Highly-integrated memory controller
    • Fully compliant with CompactFlash™ specification 3.0, compatible with specification 4.1
    • Fully compatible with PCMCIA specification
    • PC Card ATA Interface supported
    • True IDE mode compatible
    • Up to PIO mode 6 supported
    • Up to MDMA4 supported
    • Up to UDMA4 supported
    • Hardware RS-code ECC (4 Bytes/528 Bytes correction)
    • Fix drive (IDE mode) & removable drive (PCMCIA mode) as default configuration
  • Small form factor
    • CFC Type I: 36.4mm x 42.8mm x 3.3mm
  • Low-power CMOS technology
  • 3.3V or 5.0V power supply
  • Power saving mode (with automatic wake-up)
  • S.M.A.R.T. support by *-SMA product type
  • Wear Leveling: equal wear leveling of static and dynamic data, assures that dynamic data as well as static data is balanced evenly across the memory; maximum write endurance of the device is guaranteed.
  • Data Retention: 10 year (JESD47)
  • Patented power-off reliability
    • No data loss of older sectors
    • All data written to the flash if card status is ready after write command

  • High reliability
    • MTBF: > 3,000,000 hours
    • Data reliability: < 1 non-recoverable error per 1014 bits read
    • Number of insertions/removals: > 10,000
  • Hot swappable in PCMCIA modes
  • High performance
    • Up to 66MB/s burst transfer rate in UDMA4
    • Sustained Write performance: up to 35MB/s (UDMA4)
    • Sustained Read Performance: up to 45MB/s (UDMA4)
  • Available densities
    • Up to 32GBytes
  • Operating System support
    • Standard Software Drivers operation CompactFlash™
  • Controlled BOM

Part Number

Datasheet
Memory
Size
Active Mode
Current
Sustained
Read

Sustained Write
SFCF0128H1BK1TO-I-MS-553-SMA Datasheet Datasheet 128MB 70mA, 80mA 19MB/s 11MB/s to 13MB/s
SFCF0256H1BK1TO-I-MS-553-SMA 256MB 70mA, 80mA 19MB/s 11MB/s to 13MB/s
SFCF0512H1BK2TO-I-MS-553-SMA 512MB 80mA, 110mA 35MB/s 18MB/s
SFCF1024H1BK2TO-I-MS-553-SMA 1GB 80mA, 110mA 35MB/s 18MB/s
SFCF2048H1BO2TO-I-M0-543-SMA Datasheet Datasheet 2GB 90mA, 90mA 37MB/s 32MB/s
SFCF4096H1BO2TO-I-D1-543-SMA 4GB 90mA, 90mA 37MB/s 32MB/s
SFCF8192H1BO2TO-I-Q1-543-SMA 8GB 90mA, 90mA 37MB/s 32MB/s
Block Diagram
Block Diagram

Swissbit's C-440 Industrial CompactFlash™ Cards have an internal intelligent controller which manages interface protocols, data storage and retrieval as well as hardware BCH-code Error Correction Code (ECC), defect handling, diagnostics and clock control. The wear leveling mechanism assures an equal usage of the Flash memory cells to extend the life time. Once the Card has been configured by the host, it behaves as a standard ATA (IDE) disk drive. The hardware BCH-code ECC allows to detect and correct 6 bit per sector or 24 bit per double sector, depending on the flash. The Card has a voltage detector and a powerful power-loss management feature to prevent data corruption after power-down.

Features
  • Highly-integrated memory controller
    • CompactFlashTM specification 4.1, compatible with specification 5.0
    • PCMCIA specification 2.1 (chapter CF-ATA Registers) & PC Card ATA Interface Specification 8, 7, 6, and 5
    • True IDE mode compatible, up to UDMA6 / MDMA4 / PIO6 supported
    • Fix drive (IDE mode) & removable drive (PC card mode) as default in the same card
    • Hot swappable in PC card modes
    • Signal termination resistors to improve signal quality
    • LBA48 address support (LBA28 limitation on request)
    • Fix drive (IDE mode) & removable drive (PC card mode) as default configuration
  • Small form factor
    • CFC Type I: 36.4mm x 42.8mm x 3.3mm
  • Low-power CMOS technology
  • 3.3V or 5.0V power supply, card drives bus with 3.3V, inputs 5V compatible
  • Power saving mode (with automatic wake-up)
  • S.M.A.R.T. support and extended vendor information
  • Wear Leveling: equal wear leveling of static and dynamic data, assures that dynamic data as well as static data is balanced evenly across the memory; maximum write endurance of the device is guaranteed
  • Data Retention: 10 year (JESD47)
  • Patented power-off reliability
  • No data loss of older sectors
  • Max. 32 sectors data loss (old data kept)
  • High reliability
    • MTBF >3,000,000 hours
    • Data reliability: < 1 non-recoverable error per 1014 bits read
    • Number of connector insertions/removals: >10,000
    • 24bit per double sector ECC capability
    • Near Miss ECC handling at read (refresh and correct data, if multiple correctable errors detected)
    • Read Disturb Management (RDM, refresh and correct data after a certain number of read commands per block)
     

  • High performance
    • Up to 133MB/s burst transfer rate in UDMA6
    • Sustained Write performance: up to 40MB/s (UDMA6 untrimmed)
    • Sustained Read Performance: up to 65MB/s (UDMA6)
    • Trim command supported to increase random write performance
    • Up to 300 IOPS with Trim Support (4k random write) and up to 32 IOPS untrimmed
  • Available densities
    • Up to 64GBytes (SLC NAND Flash)
  • Operating System support
    • Standard Software Drivers operation CompactFlashTM
  • 2 Temperature ranges
    • Commercial Temperature range 0 … +70°C
    • Industrial Temperature range -40 … +85°C
  • Life Cycle Management
  • Controlled BOM
  • RoHS compatible

Part Number

Datasheet
Memory
Size
Active Mode
Current
Sustained
Read

Sustained Write
SFCF2048H2BU2TO-I-MS-527-STD


Datasheet Datasheet
2GB 110mA, 90mA 59MB/s 31MB/s
SFCF4096H2BU4TO-I-MS-527-STD 4GB 110mA, 90mA 59MB/s 31MB/s
SFCF8192H2BU2TO-I-QT-527-STD 8GB 110mA, 90mA 59MB/s 31MB/s
SFCF16GBH2BU4TO-I-QT-527-STD 16GB 110mA, 90mA 59MB/s 31MB/s
SFCF32GBH2BU4TO-I-QT-527-STD 32GB 110mA, 90mA 58MB/s 31MB/s
SFCF64GBH2BU4TO-I-NU-527-STD 64GB 110mA, 90mA 58MB/s 31MB/s
Block Diagram
Block Diagram
 

  • Swissbit