Contact Mouser (USA)  (800) 346-6873     |     Feedback        
View Cart     |     Change Location  USD
United States United States

Please confirm your currency selection:

US Dollars
Home » NEWEST Products » New by Manufacturer » NXP Semiconductors » LPC11C22 / LPC11C24 Cortex-M0 MCUs from NXP
NEWEST Products
NXP Semiconductors LPC11C22 / LPC11C24 Cortex-M0 Microcontrollers

View Product List

Additional Resources

NXP Semiconductors LPC11C22 / LPC11C24
Cortex-M0 Microcontrollers

NXP Semiconductors LPC11C22 and LPC11C24 Cortex-M0 Microcontrollers are designed for 8-/16-bit microcontroller applications, offering high performance, low power, simple instruction set, and memory addressing together with reduced code size compared to existing 8-/16-bit architectures. These NXP Cortex-M0 MCUs include 16kB (LPC11C22) or 32kB (LPC11C24) of Flash memory, 8kB of data memory, one C_CAN controller, one Fast-mode Plus I²C-bus interface, one RS-485/EIA-485 UART, two SPI interfaces with SSP features, four general purpose counter/timers, a 10-bit ADC, and 36 general purpose I/O pins. On-chip C_CAN drivers and Flash In-System Programming tools via C_CAN are included. The LPC11C22 and LPC11C24 also feature an integrated on-chip, high-speed CAN transceiver. NXP LPC11C22 and LPC11C24 MCUs are ideal for use in a variety of applications, including eMetering, elevator systems, industrial and sensor-based networks, and white goods.

Features
  • ARM Cortex-M0 processor, running at frequencies of up to 50MHz
  • ARM Cortex-M0 built-in Nested Vectored Interrupt Controller (NVIC)
  • Serial Wire Debug
  • System tick timer
  • On-chip, high-speed CAN transceiver
  • 16kB on-chip flash program memory (LPC11C22) / 32kB on-chip flash program memory (LPC11C24)
  • 8kB SRAM data memory
  • 36 General Purpose I/O (GPIO) pins with configurable pull-up/-down resistors
  • High-current output driver (20 mA) on one pin
  • High-current sink drivers (20 mA) on two I²C-bus pins in Fast-mode Plus
  • Four general purpose counter/timers with 4 capture inputs and 12 match outputs
  • Programmable WatchDog Timer (WDT)
  • 10-bit ADC with input multiplexing among 8 pins
  • UART with fractional baud rate generation
  • Two SPI controllers with SSP features
  • I²C-bus interface
  • C_CAN controller and on-chip C_CAN drivers
  • Integrated PMU (Power Management Unit) to minimize power consumption
  • Single 3.3V power supply (1.8V to 3.6V)
Applications
  • eMetering
  • Elevator systems
  • Industrial and sensor based networks
  • White goods
Block Diagram
Block Diagram
  • NXP Semiconductors
  • Industrial
  • Semiconductors|Embedded Processors|IC-MCU/MPU