Contact Mouser (USA)  (800) 346-6873     |     Feedback        
View Cart     |     Change Location  USD
United States United States

Please confirm your currency selection:

US Dollars
Home » NEWEST Products » New by Manufacturer » NXP Semiconductors » LPC11E6x 32-bit ARM Cortex-M0+ MCUs - NXP
NEWEST Products
NXP LPC11E6x 32-bit ARM Cortex-M0+ Microcontrollers

NXP LPC11E6x 32-bit ARM Cortex-M0+ Microcontrollers

NXP's LPC11E6x 32-bit ARM Cortex-M0+ Microcontrollers gives engineers a wider choice when selecting entry-level microcontrollers designed for the harsh operating conditions common in many industrial, lighting, and industrial automation applications. The LPC11E6x is available in three memory and package variations and offers exceptional power efficiency, achieved through an ARM®Cortex-M0+™ core and power profiles that allow various power saving options depending on the application demands. Memory options include up to 256kB Flash, 36kB RAM and 4kB EEPROM. High-precision analog features include a best-in-class 2Msps, 12-channel, 12-bit ADC, and ample connectivity is provided through I2C and SPI interfaces, USARTs, and up to 80 GPIOs. The LPC11E6x takes advantage of an on-chip SCTimer/PWM to provide advanced timing features. This unique block can operate like most traditional timers, and includes a state machine to give programmers a higher degree of timing control. It can be configured as multiple PWMs, a PWM with dead-time control, a PWM with reset capability, and many other functions that cannot be duplicated with traditional timers. Also available, the SCTimer/PWM Cookbook provides a collection of examples and usage notes to help programmers quickly implement timing functions for LPC11E6x applications.

Features
  • System
    • ARM Cortex-M0+ processor (version r0p1), running at frequencies of up to 50MHz with single-cycle multiplier and fast single-cycle I/O port
    • ARM Cortex-M0+ built-in Nested Vectored Interrupt Controller (NVIC)
    • AHB Multilayer matrix
    • System tick timer
    • Serial Wire Debug (SWD) and JTAG boundary scan modes supported
    • Micro Trace Buffer (MTB) supported
  • Memory
    • Up to 128kB on-chip flash programming memory with page erase
    • Up to 20kB main SRAM
    • Up to two additional SRAM blocks of 2kB each
    • Up to 4kB EEPROM
  • ROM API support
    • Boot loader
    • USART drivers
    • I2C drivers
    • DMA drivers
    • Power profiles
    • Flash In-Application Programming (IAP) and In-System Programming (ISP)
    • 32-bit integer division routines
  • Digital peripherals
    • Simple DMA engine with 16 channels and programmable input triggers
    • High-speed GPIO interface connected to the ARM Cortex-M0+ IO bus with up to 36 General-Purpose I/O (GPIO) pins with configurable pull-up/pull-down resistors, programmable open-drain mode, input inverter, and programmable glitch filter and digital filter
    • Pin interrupt and pattern match engine using eight selectable GPIO pins
    • Two GPIO group interrupt generators
    • CRC engine
  • Configurable PWM/timer subsystem (two 16-bit and two 32-bit standard counter/timers, two State-Configurable Timers (SCTimer/PWM)) that provides
    • Up to four 32-bit and two 16-bit counter/timers or two 32-bit and six 16-bit counter/timers
    • Up to 21 match outputs and 16 capture inputs
    • Up to 19 PWM outputs with 6 independent time bases
  • Windowed Watchdog Timer (WWDT)
  • Real-time Clock (RTC) in the always-on power domain with separate battery supply pin and 32kHz oscillator
  • Analog peripherals
    • One 12-bit ADC with up to 8 input channels with multiple internal and external trigger inputs and with sample rates of up to 2M samples/s, and the ADC supports two independent conversion sequences
    • Temperature sensor

  • Serial interfaces
    • Up to four USART interfaces, all with DMA, synchronous mode, and RS-485 mode support
    • Four USARTs use a shared fractional baud generator
    • Two SSP controllers with DMA support
    • Two I2C-bus interfaces with one I2C-bus interface with specialized open-drain pins that supports I2C Fast-mode plus
  • Clock generation
    • 12MHz internal RC oscillator trimmed to 1% accuracy for -25°C ≤ Tamb ≤ +85°C that can optionally be used as a system clock
    • On-chip 32kHz oscillator for RTC
    • Crystal oscillator with an operating range of 1MHz to 25MHz and oscillator pins are shared with the GPIO pins
    • Programmable watchdog oscillator with a frequency range of 9.4kHz to 2.3MHz
    • PLL allows CPU operation up to the maximum CPU rate without the need for a high-frequency crystal
    • Clock output function with divider that can reflect the crystal oscillator, the main clock, the IRC, or the watchdog oscillator
  • Power control
    • Integrated PMU (Power Management Unit) to minimize power consumption
    • Reduced power modes: Sleep mode, Deep-sleep mode, Power-down mode, and Deep power-down mode
    • Wake-up from Deep-sleep and Power-down modes on external pin inputs and USART activity
    • Power-On Reset (POR)
    • Brownout detect
  • Unique device serial number for identification
  • Single power supply (2.4V to 3.6V)
  • Separate VBAT supply for RTC
  • Operating temperature range -40°C to 105°C
  • Available as LQFP48 package

  • Applications
    • Three-phase e-meter
    • GPS tracker
    • Gaming accessories
    • Car radio
    • Medical monitor
    • PC peripherals
Block Diagram
Block Diagram
eNews
  • NXP Semiconductors