Contact Mouser (USA)  (800) 346-6873     |     Feedback        
View Cart     |     Change Location  USD
United States United States

Please confirm your currency selection:

US Dollars
Home » NEWEST Products » New by Manufacturer » NXP Semiconductors » NXP BGU Low-Noise Amplifier MMICs
NEWEST Products

NXP BGU Low-Noise Amplifier MMICs

NXP's BGU Family of Low-Noise Amplifier MMICs offer the best reception of weak GPS signals by suppressing strong cellular and WLAN transmit signals, an industry first. Linearity for these LNAs improves with a 10dB better IP3 under -40 to -20dBm jamming conditions, while NF remains below 1dB. By requiring only two external components, they save up to 50% in PCB size and 10% in component cost, offering the smallest footprint in the market.

BGU7003

 

The NXP BGU7003 Wideband Silicon Germanium Low-Noise Amplifier MMIC is a wideband amplifier developed in SiGe:C technology for high speed, low-noise applications in a plastic, leadless 6-pin, extremely thin small outline SOT-891 package.
NXP BGU Low-Noise Amplifier MMICs 
Features
  • Low noise high gain microwave MMIC
  • Applicable between 40 MHz and 6 GHz
  • Integrated temperature stabilized bias for easy design
  • Bias current configurable with external resistor
  • Noise figure NF = 0.80 dB at 1.575 GHz
  • 110 GHz transit frequency - SiGe:C technology
  • Power-down mode current consumption < 1 μA
  • Optimized performance at low 5 mA supply current
  • ESD protection > 1 kV Human Body Model (HBM) on all pins
Applications
  • GPS
  • Satellite radio
  • Low-noise amplifiers for microwave communications systems
  • WLAN and CDMA applications
  • Analog / digital cordless applications
 
View Products Detail

 


BGU7004

The NXP BGU7004 Low Noise Amplifier MMIC is for GPS receiver applications in a plastic leadless 6-pin, extremely small SOT-886 package. The BGU7004 requires only one external matching inductor and one external decoupling capacitor. The BGU7004 adapts itself to the changing environment resulting from co-habitation of different radio systems in modern cellular handsets. It has been designed for low power consumption and optimal performance when jamming signals from co-existing cellular transmitters are present. At low jamming power levels it delivers 16.5 dB gain at a noise figure of 0.9 dB. During high jamming power levels, resulting for example from a cellular transmit burst, it temporarily increases its bias current to improve sensitivity.

NXP BGU Low-Noise Amplifier MMICs
Features
  • AEC-Q100 qualified
  • Covers full GNSS L1 band, from 1559 MHz to 1610 MHz
  • Noise figure = 0.9 dB
  • Gain 16.5 dB
  • High 1 dB compression point of −11 dBm
  • High out of band IP3i of 9 dBm
  • Supply voltage 1.5 V to 2.85 V, optimized for 1.8 V
  • Power down mode current consumption < 1 uA
  • Optimised performance at low supply current of 4.5 mA
  • Integrated temperature stabilized bias for easy design
  • Requires only one input matching inductor and one
    supply decoupling capacitor
  • Input and output DC decoupled
  • ESD protection on all pins (HBM > 2 kV)
  • Integrated matching for the output
  • Small 6-pin leadless package 1 mm × 1.45 mm × 0.5 mm
  • 110 GHz transit frequency - SiGe:C technology
Applications
  • LNA for GPS in automotive applications like
    Toll Collection and Emergency Call
  • LNA for GPS in smart phones, feature phones,
    tablet PCs, Personal Navigation Devices,
    Digital Still Cameras, Digital Video Cameras,
    RF Front End modules, complete GPS chipset
    modules and theft protection (laptop, ATM).

View Products Detail


BGU7005

The NXP BGU7005 Low Noise Amplifier MMIC is for GPS receiver applications in a plastic leadless 6-pin, extremely small SOT-886 package. The BGU7005 requires only one external matching inductor and one external decoupling capacitor. The BGU7005 adapts itself to the changing environment resulting from co-habitation of different radio systems in modern cellular handsets. It has been designed for low power consumption and optimal performance when jamming signals from co-existing cellular transmitters are present. At low jamming power levels it delivers 16.5 dB gain at a noise figure of 0.85 dB. During high jamming power levels, resulting for example from a cellular transmit burst, it temporarily increases its bias current to improve sensitivity.

NXP BGU Low-Noise Amplifier MMICs
Features
  • Covers full GNSS L1 band, from 1559 MHz to 1610 MHz
  • Noise figure (NF) = 0.85 dB
  • Gain 16.5 dB
  • High input 1 dB compression point Pi(1dB) of −11 dBm
  • High out of band IP3i of 9 dBm
  • Supply voltage 1.5 V to 3.1 V
  • Power down mode current consumption < 1 uA
  • Optimised performance at low supply current of 4.5 mA
  • Integrated matching for the output
  • Requires only one input matching inductor and one supply decoupling capacitor
  • Input and output DC decoupled
  • ESD protection on all pins (HBM > 2 kV)
  • Integrated temperature stabilized bias for easy design
  • Small 6-pin leadless package 1 mm × 1.45 mm × 0.5 mm
  • 110 GHz transit frequency - SiGe:C technology
Applications
  • LNA for GPS, GLONASS, Galileo and Compass (BeiDou) in smart phones
  • Tablet PCs, Personal Navigation Devices, Digital Still Cameras
  • Digital Video Cameras, RF Front End modules
  • Complete GPS chipset modules and theft protection (laptop, ATM)

View Products Detail


BGU7007

The BGU7007 Low Noise Amplifier MMIC is for GNSS receiver applications in a plastic leadless 6-pin, extremely small SOT-886 package. The BGU7007 requires only one external matching inductor and one external decoupling capacitor. The BGU7007 adapts itself to the changing environment resulting from co-habitation of different radio systems in modern cellular handsets. It has been designed for low power consumption and optimal performance when jamming signals from co-existing cellular transmitters are present. At low jamming power levels it delivers 18.5 dB gain at a noise figure of 0.85 dB. During high jamming power levels, resulting for example from a cellular transmit burst, it temporarily increases its bias current to improve sensitivity.

NXP BGU Low-Noise Amplifier MMICs 
Features
  • Covers full GNSS L1 band, from 1559 MHz to 1610 MHz
  • Noise figure (NF) = 0.85 dB
  • Gain 18.5 dB
  • High 1 dB compression point Pi (1dB) of −12 dBm
  • High out of band IP3i of 4 dBm
  • Supply voltage 1.5 V to 3.1 V
  • Power down mode current consumption < 1 uA
  • Optimized performance at low supply current of 4.8 mA
  • Integrated temperature stabilized bias for easy design
  • Requires only one input matching inductor and one supply decoupling capacitor
  • Input and output DC decoupled
  • ESD protection on all pins (HBM > 2 kV)
  • Integrated matching for the output
  • Small 6-pin leadless package 1 mm × 1.45 mm × 0.5 mm
  • 110 GHz transit frequency - SiGe:C technology
Applications
  • LNA for GPS, GLONASS, Galileo and Compass (BeiDou) in smart phones
  • Feature phones, tablet PCs
  • Personal Navigation Devices, Digital Still Cameras, Digital Video Cameras
  • RF Front End modules
  • Complete GPS chipset modules and theft protection (laptop, ATM)

    View Products List

BGU7008

 

The NXP BGU7008 Low Noise Amplifier MMIC is an AEC-Q100 qualified Low Noise Amplifier for GNSS receiver applications in a plastic leadless 6-pin, extremely small SOT886 package. The BGU7008 requires only one external matching inductor and one external decoupling capacitor. The BGU7008 adapts itself to the changing environment resulting from co-habitation of different radio systems in modern cellular handsets. It has been designed for low power consumption and optimal performance when jamming signals from co-existing cellular transmitters are present. At low jamming power levels it delivers 18.5 dB gain at a noise figure of 0.85 dB. During high jamming power levels, resulting for example from a cellular transmit burst, it temporarily increases its bias current to improve sensitivity.

NXP BGU Low-Noise Amplifier MMICs 
Features
  • AEC-Q100 qualified
  • Covers full GNSS L1 band, from 1559 MHz to 1610 MHz
  • Noise figure = 0.85 dB
  • Gain 18.5 dB
  • High 1 dB compression point of −12 dBm
  • High out of band IP3i of 4 dBm
  • Supply voltage 1.5 V to 2.85 V
  • Power down mode current consumption < 1 uA
  • Optimized performance at low supply current of 4.8 mA
  • Integrated temperature stabilized bias for easy design
  • Requires only one input matching inductor and one supply decoupling capacitor
  • Input and output DC decoupled
  • ESD protection on all pins (HBM > 2 kV)
  • Integrated matching for the output
  • Small 6-pin leadless package 1 mm × 1.45 mm × 0.5 mm
  • 110 GHz transit frequency - SiGe:C technology
Applications
  • LNA for GPS, GLONASS and Galileo in automotive applications like Toll Collection
  • LNA for GPS in smart phones, feature phones, tablet PCs
  • Complete GPS chipset modules and theft protection (laptop, ATM)
  • Personal Navigation Devices, Digital Still Cameras, Digital Video Cameras
  • RF Front End modules

View Products Detail


BGU8007

 

The NXP BGU8007 Low Noise Amplifier MMIC for GNSS receiver applications in a plastic leadless 6-pin, extremely small SOT-886 package. The BGU8007 requires only one external matching inductor and one external decoupling capacitor. The BGU8007 adapts itself to the changing environment resulting from co-habitation of different radio systems in modern cellular handsets. It has been designed for low power consumption and optimal performance when jamming signals from co-existing cellular transmitters are present. At low jamming power levels it delivers 19 dB gain at a noise figure of 0.75 dB. During high jamming power levels, resulting for example from a cellular transmit burst, it temporarily increases its bias current to improve sensitivity.

NXP BGU Low-Noise Amplifier MMICs 
Features
  • Covers full GNSS L1 band, from 1559 MHz to 1610 MHz
  • Noise figure (NF) = 0.75 dB
  • Excellent low NF < 1 dB in the presence of strong jamming signals
  • Gain 19 dB
  • High input 1 dB compression point Pi(1dB) of −11 dBm
  • High out of band IP3i of 4 dBm
  • Supply voltage 1.5 V to 2.5 V
  • Power down mode current consumption < 1 uA
  • Optimized performance at low supply current of 4.6 mA
  • Integrated temperature stabilized bias for easy design
  • Requires only one input matching inductor and one supply decoupling capacitor
  • Input and output DC decoupled
  • ESD protection on all pins (HBM > 2 kV)
  • Integrated matching for the output
  • Small 6-pin leadless package 1 mm × 1.45 mm × 0.5 mm
  • 110 GHz transit frequency - SiGe:C technology
Applications
  • LNA for GPS, GLONASS, Galileo and Compass (BeiDou) in smart phones
  • Feature phones, Tablet PCs, Personal Navigation Devices
  • Digital Still Cameras, Digital Video Cameras, RF Front End modules
  • Complete GPS chipset modules and theft protection (laptop, ATM)
 
View Products Detail


Mouser.com Comments

Mouser welcomes lively and courteous interaction on our website. In order to host a cooperative discussion, please keep comments relevant to the topics on this page. All comments are reviewed prior to being posted to ensure appropriate language and content is used.

  • NXP Semiconductors
  • Semiconductors|Integrated Circuits|IC-RF