Contact Mouser (USA)  (800) 346-6873     |     Feedback        
View Cart     |     Change Location  USD
United States United States

Please confirm your currency selection:

US Dollars
Home » NEWEST Products » New by Manufacturer » Ka-Ro Electronics » TX6Q Computer on Modules - Ka-Ro Electronics
NEWEST Products
Ka-Ro Electronics TX6Q Computer on Modules

Ka-Ro Electronics TX6Q Computer on Modules

Ka-Ro Electronics TX6Q is specially designed for Freescales i.MX6Quad multimedia processors. The TX6Q modules are complete computers, implemented on a board smaller than a credit card, and ready to be designed into your embedded system. TX modules includes a Freescale® i.MX6Q processor, SDRAM and Flash memory. The integrated LCD-controller enables direct connection of an LCD screen. The TX6Q is specifically targeted at embedded applications where size, high cpu-performance and cost are critical factors. High-Speed communication interfaces include onboard Ethernet PHY/on-chip USB PHY allows direct use of connectors/magnetics on the baseboard without the need for additional logic.
Learn More about Freescale i.MX6 ARM Cortex-A9

Features
  • Processor: Freescale i.MX 6Quad, 1 GHz
  • RAM: 1GB DDR3 SDRAM
  • ROM: 128MB NAND Flash
  • RTC: DS1339 Real Time Clock
  • Power Supply: Single 3.1V to 5.5V
  • Size: 31mm SO-DIMM
  • Temp-Grade: Extended Consumer -20°C to 70°C
  • 10/100Mbps Ethernet IEEE1588 support
  • Two High Speed USB 2.0 ports
  • Full HD LCD controller
  • OpenGL ES 2.0 and OpenVG 1.1 hardware accelerators
  • Multi-format HD 1080p video decoder and 720p video encoder hardware engine
  • Two Camera Interfaces

  • NEON MPE coprocessor
    • SIMD Media Processing Architecture
    • NEON register file with 32x64-bit general-purpose registers
    • NEON Integer execute pipeline (ALU, Shift, MAC)
    • NEON dual, single-precision floating point execute pipeline (FADD, FMUL)
    • NEON load/store and permute pipeline
  • Unified 1MByte L2 cache Vector Floating Point Unit
  • Several interfaces: 3x UART, 2x SDIO, 2x SSI/AC97/I2S, I2C, CSPI, Keypad, Ext. Memory I/F
  • Two CAN interfaces
  • 3.3V I/O
  • OS Support: Windows Embedded Compact 7, Linux, Android, QNX
SO-DIMM Dimensions
SO-DIMM Dimensions

TX Pinout Diagram
TX Pinout Diagram
Ka-Ro Electronics TX28 Computer on Module

Order Ka-Ro Electronics TX28 Computer on Module View Product List

Ka-Ro Electronics Starter Kit V

The Starter-Kit V is a ready to use development system for building applications based on the TX embedded processor boards.

Features
  • DIMM200 TX Sockets
  • Two SD-card sockets
  • USB 2.0 OTG and USB 2.0 Host connector
  • D-SUB 15 VGA connector
  • 40pin LCD flat cable header
  • 3.5mm headphone connector
  • JTAG interface
  • SGTL5000 audio codec
  • TSC2007 touchscreen controller
  • RS232 on 10pin flat cable and SUB-D header

  • All pins of the TX socket are connected to daughter board slot for easy application design-in
  • 10/100 Mbit/s Ethernet
  • 5VDC Power Supply by USB-OTG or power jack
  • Dimensions: 100mm x 160mm
  • Schematics of the base board are included for reference
Starter Kit V Board



Display Options

The optional display comes with an FCC cable and a small adapter PCB which can be plugged directly onto the Starter-Kit 40-pin LCD header.

    Option 1: 5.7" VGA Resistive Touch
  • 5.7" TFT display
  • 640x480 dpi
  • White LED backlight
  • Resistive Touchscreen
    Option 2: 5.7" VGA PolyTouch
  • 5.7" TFT display
  • 640x480 dpi
  • White LED display
  • Capacitive Touchscreen
  • Supports Freescale's 10.1" 1024x768 (XGA) displays with capacitive touch (not included)

Ka-Ro Electronics TX Fastener Kits

A fastener kit provides secure mounting of modules plugged into the SO-DIMM socket. An additional thread locker is recommended to hold the screws in during vibration.

Description Quanity
Self Retaining Screw Spacer for M2.0
Length: 3.0mm
Outside Diameter: 4.0mm
20
Nut: M2.0 20
Screw: M20 x 8mm 20

TX Fastener Kit mounted on board
TX Fastener Kit mounted on board

Ka-Ro Electronics TX Heatsink Kit

The TX heatsink Kit provides cooling, while also providing a secure mount for the module

Item Description Quanity
Heatsink 27mm x 68mm x 14mm 1
Spacer
Self Retaining Screw Spacer for M2.0
Length: 3.0mm
Outside Diameter:4.0mm
2
Screw Spacer fro M2.0
Length: 2.0mm
Outside Diameter: 4.0mm
2
Thermal Gap Filler Heat conductive gel foil GEL 10
57mm x 15mm
1
Screw M2.0 x 12mm 2

Heatsink Diagram
TX Heatsink Diagram
  • Ka-Ro electronics