Contact Mouser (USA)  (800) 346-6873     |     Feedback        
View Cart     |     Change Location  USD
United States United States

Please confirm your currency selection:

US Dollars
Home » NEWEST Products » New by Manufacturer » Hammond Manufacturing » HJ H Type 4, 12 Mild Steel Junction Boxes - Hammond
NEWEST Products
Hammond HJ H Type 4, 12 Mild Steel Junction Boxes

Hammond HJ H Type 4, 12 Mild Steel Junction Boxes

Hammond HJ H Type 4, 12 Mild Steel Junction Boxes provide protection in equipment that may be hosed down or otherwise become very wet and in outdoor applications requiring full-weather protection. These Hammond Type 4, 12 Mild Steel Junction Boxes are designed for use as instrument enclosures, electrical junction boxes, terminal wiring enclosures, or electric, hydraulic, or pneumatic control housings. HJ H series boxes feature a body formed from 16 or 14 gauge steel. Covers are formed from 14 gauge steel. They offer smooth, continuously welded seams without knockouts, cutouts, or holes. Welded brackets provide for enclosure mounting. A continuous hinged cover is secured with stainless steel clamps and screws. These Hammond products meet UL 508 Type 3R, 4, 12, and 13 and CSA Type 3R, 4, 12, and 13 standards and comply with NEMA Type 3R, 4, 12, and 13, JIC EGP-1-1967, and IEC 60529, IP66.

Construction
  • Body formed from 16 or 14 gauge steel. Covers are formed from 14 gauge steel
  • Smooth, continuously welded seams without knockouts, cutouts or holes
  • Welded brackets provide for enclosure mounting
  • Continuous hinged cover is secured with stainless steel clamps and screws
  • Stainless steel continuous hinge on door may be removed by pulling the stainless steel hinge pin
  • Seamless poured-in place gasket
  • Internal threaded weld studs are provided for mounting inner panels
  • A bonding stud is provided on the door and a grounding stud is provided in the enclosure
Finish
  • Cover and enclosure are phos­phatized, finished in recoatable smooth ANSI 61 gray powder coating
Standards
  • UL 508 Type 3R, 4, 12 and 13
  • CSA Type 3R, 4, 12 and 13
  • Complies with:
    • NEMA Type 3R, 4, 12 and 13
    • JIC EGP-1-1967 unless marked
    • IEC 60529, IP66
Applications
  • Instrument enclosures
  • Electric, hydraulic, or pneumatic control housings
  • Electrical junction boxes
  • Terminal wiring enclosures

Part Number Outside Depth Outside Height Outside Width Panel Width Panel Height
First Previous Next Last

Views
Views of Boxes

Clamp Locations
Clamp Locations
  • Hammond Manufacturing