1-Line Feedthrough
EPCOS 1-Line EMC Feedthrough Filters provide broadband EMI suppression up to the GHz range. These easy-to-install devices feature a modular design and Mesh Contact Technology for uniform concentric contacting of the MKP capacitor winding without the thermal stress associated with soldering. The low inductance capacitor is secured using UL 94 V-0 metal case with synthetic resin terminals and central screw fixing for high contact reliability. The compact dimensions allow the devices to perform well from low frequencies to above 300 MHz. The concentric layout of the components enables high insertion loss values to be attained in a frequency range above 1 GHz. EPCOS 1-Line EMC Feedthrough Filters offer a rated voltage of 75 to 440 V AC, 16 to 200 A current, and 0.00125 to 4.7 μF capacitance. Compliant with IEC 60384-14 and UL approved, EPCOS 1-Line EMC Feedthrough Filters are well-suited for broadband interference suppression for AC/DC supply lines in shielded rooms, power supplies, telephone exchanges, base stations, electrical machines and systems. EPCOS 1-Line EMC Feedthrough Filters are available with threaded studs or axial leads.
View Products List
2-Line
EPCOS 2-Line EMC Filter for Converters and Power Electronics
is offered as a power line filter for 1-phase systems. Designed to
comply with UL 1283, CSA C22.2 No.8, EPCOS 2-Line EMC Filter features
two-stage construction for high insertion loss and finger-safe terminal
blocks. EPCOS easy-to-install 2-Line EMC Filter offers a rated 250 V
DC/AC voltage, 8 to 25 A current, optimized leakage current, and IP 20
protection. ENEC10 approved, EPCOS 2-Line EMC Filter is especially
well-suited for frequency converters in motor drives, elevators, pumps,
conveyor systems, HVAC systems (heating, ventilation and air
conditioning), power supplies, and DC applications.
View Products List
3-Line
EPCOS 3-Line EMC Filters for Converters and Power Electronics are
designed as easy-to-install power line filters in 3-phase systems. The
lightweight design is optimized
for leakage current and operation under full load. EPCOS 3-Line EMC
Filters are available in compact, ultra-compact and low cost versions
with voltages up to 760/440 V AC and current ratings up to 2500 A. The
compact and low cost versions feature busbar terminals and the
ultra-compact versions feature finger-safe terminal blocks. EPCOS
3-Line
EMC Filters are especially well-suited for frequency converters in motor
drives, elevators, wind farms, and power supplies.
View Products List
B84142C
EPCOS B84142C Series 1500VDC 2-Line Filters are
lightweight, easy-to-install power line filters for Converters and Power
Electronics. Designed to comply with IEC 60939, UL 1283, CSA 22.2 No.8,
EPCOS 1500VDC 2-Line Filters feature a 2-line filter, metal case, and
busbar terminals on line and load side. These devices offer reduced
Y−capacitance. EPCOS 1500VDC 2-Line Filters are well-suited for frequency converters in motor
drives, photovoltaic, solar panels, wind farms, and power supplies.
View Products List
B84299D6
EPCOS B84299D6 Series Power Line Filters are current-compensated
EMC Power Line Filters. Designed with an RF-tight case, the B84299D6
Series suppress EMI interference in shielded rooms and secured areas.
The
B84299D6 Series includes power line filters with 250/277/480 voltage
ratings, current ratings from 5 to 100A, 50/60 Hz frequency, leakage
currents from 1.6 mA to 3751 mA, screw-type termination, and chassis
mounting.
View Products List
