|    Change Country Change Location USD
 
United States United States

Please confirm your currency selection:

US Dollars
Home » NEWEST Products » New by Manufacturer » EPCOS / TDK » EPCOS Design Engineering Sample Kits
NEWEST Products
 

EPCOS Design Kits

Designed to help the engineer select the perfect component for their application, EPCOS Design Kits offer a variety of components conveniently packaged and individually labeled for easy access. A short description introduces each sample kit and is accompanied by a PDF that provides an inside view of the kit. Data sheet links provide a list of the data sheet s for each of the products included in the sample kit.

Individual components in the EPCOS Design Kits are available for overnight shipment from Mouser in single piece, prototype, and small product run quantities.

Power Line Chokes

epcos b82723 ring core chokes for power lines Ring Core Chokes: B82723X1 Series
for Power Lines

  • LR from 4.5 to 56mH
 
 Kit

Kit Brochure
 Kit Components
Kit Component Products






 
D Core Chokes: Series B82731M for Power Lines
  • LR from 3.3 to 100mH
  • Nominal voltage 250VAC/250VDC
  • Creepage distances and clearances > 3 mm
  • Height: 20 +0.5mm;
    Lead spacing: 12.5 x 10 ±0.2mm
  • Higher inductance or intermediate values possible
  • Horizontal series B82731H with height 15.5mm max. available
  • Higher rated current IR available with series B82732R/W (IR up to 2.2A) and B82734R/W (IR up to 4.6A)
  Kit

Kit Brochure


Kit Components
Kit Component Products



E Core Chokes: Series B82731-T for Power Lines
  • LR from 3.3 to 100mH
  • Nominal voltage: 250VAC/ 250VDC
  • Creepage distances and clearances: > 3mm
  • Height: 21.1mm max;
    Lead spacing: 10 x 10 ±0.2mm
  • Higher inductance or intermediate values possible
  • Approx. 2% stray inductance for symmetrical interference suppression
 Kit

Kit Brochure


Kit Components
Kit Component Products


 
Frame Core Chokes: Series B82732F*B001 for Power Lines
  • LR from 10 to 100mH
  • Rated voltage: 250VAC
  • Clearance and creepage distances: > 3mm
  • Lead spacing: 18.75 x 10.0 ±0.2mm
  • Climatic category 40/125/56 (to IEC 60068-1)
  • Excellent differential-mode suppression
Kit

Kit Brochure


Kit Components
Kit Component Products



Frame Core Chokes: Series B82733F*B001 for Power Lines
  • LR from 10 to 100mH
  • Rated voltage: 250VAC
  • Clearance and creepage distances: > 3mm
  • Lead spacing: 22.5 x 20.0 ±0.2mm
  • Climatic category 40/125/56 (to IEC 60068-1)
  • Excellent differential-mode suppression
Kit

Kit Brochure


Kit Components
Kit Component Products


 
Ring Core Chokes: Series B82721 for Power Lines
  • LR from 0.2 to 39mH
  • Rated voltage: 250VAC (50/60Hz)
  • Higher inductance or intermediate values possible upon request
  • Approx. 1% stray inductance for symmetrical interference suppression
  • Higher rated current IR available with series B82722 … B82726
  • Vertical version with lead spacing 5 x 10mm available (B82721J*)
Kit

Kit Brochure


Kit Components
Kit Component Products


Ring Core Chokes: Series B82722 for Power Lines
  • LR from 1.2 to 47mH
  • Rated voltage: 250VAC (50/60Hz)
  • Higher inductance or intermediate values possible upon request
  • Approx. 1% stray inductance for symmetrical interference suppression
  • Higher rated current IR available with series B82723 … B82726
   Kit

Kit Brochure


Kit Components
Kit Component Products

Protection Devices

  Ceramic Transient Voltage Suppressors (CeraDiodes®) Kit
  • EPCOS CTVS® (ceramic transient voltage suppressors) and CeraDiodes® are ceramic multilayer components for reliable protection against such electrical transients
  • CeraDiodes provide cost-efficient but reliable ESD protection up to 30kV
  • CTVS can replace semiconductor diodes in many applications
 Kit

Kit Brochure

 
 Kit Components
Kit Component Products

  Inrush Current Limiter Engineering Kit
  • Useable in series connections up to 265 VRMS
  • Coated thermistor disk
  • Kinked leads of tinned copper wire
 Kit

Kit Brochure

 
 Kit Components
Kit Component Products

 MLV for ESD and High Energy Transient Protection in Automotive Applications
  • Bidirectional protection for ESD and high energy transients
  • Low capacitance types for bus systems
  • Use of parasitic capacitance for RFI suppression and RF filtering(replacement of additional MLCC)
 Kit

Kit Brochure
 Kit Components
Kit Component Products



Inrush Current Limiters Self-Protecting PTC Resistors
  • Self-protecting charging resistors based on PTC ceramic are suitable for smoothing capacitors in power supplies
  • To replace high-power fixed resistors for capacitor charging
  • For high pulse currents and a high number of operating cycles.
   Kit

Kit Brochure


Kit Components
Kit Component Products



SMD PTC Thermistors for Overcurrent Protection
  • Qualification based on AEC-Q200, Rev. C for EIA case sizes 3225 and 4032
  • Suitable for reflow (all types) and wave soldering (EIA case sizes 3225 and 4032 only)
  • Lead-free tinned terminations
  • RoHS-compatible
Kit 

Kit Brochure


Kit Components
Kit Component Products



PTC Thermistors Heating Elements for 12V Applications
  • Self regulating ceramic heating elements for 12V applications
  • The electric power consumption is automatically adapted to the ambient thermal conditions
  • RoHS-compatible
  • Designed for pressure contacts
Kit 

Kit Brochure


Kit Components
Kit Component Products


 
PTC Thermistors Heating Elements for 230V Applications
  • Self regulating ceramic heating elements for 230V applications
  • The electric power consumption is automatically adapted to the ambient thermal conditions
  • RoHS-compatible
  • Designed for pressure contacts
Kit 

Kit Brochure


Kit Components
Kit Component Products



Leaded Transient Voltage/RFI Suppressors (SHCVs) for Combined Overvoltage and RFI Suppression in Electric Motors
  • Leaded transient voltage / RFI suppressors (also called SHCV varistors) are leaded devices in a single component for combined overvoltage protection and RFI noise suppression on DC lines of small electric motors in industrial and automotive applications.
  • SHCV varistors are a combination of high capacitance multilayer capacitor with X7R characteristic for RF filtering and a multilayer varistor for transient protection.
Kit 

Kit Brochure
Kit Components
Kit Component Products


 
Multilayer Varistors (MLVs) for ESD and High Energy Transient Protection in Automotive Applications
  • MLVs are multilayer semiconductor ceramic components for ESD protection of safety-relevant data lines and bus systems and for high-energy transient protection (e.g. load dump and jump start) in automotive electronic devices.
  • MLVs can replace semiconductor diodes.
Kit 

Kit Brochure


Kit Components
Kit Component Products



SMD Disk Varistors (CU Varistors) for Surge Current Protection
  • SMD disk varistors (also called CU varistors) are ceramic semiconductor components for surge current protection in consumer, telecom, industrial and automotive applications.
  • SMD disk varistors are encapsulated disk varistors for SMD mounting and they are electrical equivalents to leaded disk varistors SIOV-S05 (disk diameter 5mm) in case size 3225 and SIOV-S07 (disk diameter 7mm) in case size 4032.
Kit 

Kit Brochure


Kit Components
Kit Component Products
 

CTVS Multilayer Varistors and CeraDiodes for General Use Kit 

CTVS Multilayer Varistors and CeraDiodes for General Use Kit
  • Bidirectional protection for ESD and high energy transients
  • High energy handling capability, high current handling
  • High reliability, stable protection level, excellent long-term stability
  • Multi-strike capability
  • Low leakage current, low parasitic inductance
Kit 

Kit Brochure


Kit Components
Kit Component Products

SAW Filters

  SAW Filters and Resonators for Automotive RKE and TPMS, Center Frequency 315MHz up to 868MHz

Wideband filters

  • Usable bandwidth: 1 … 30MHz
  • Chip substrate: lithium tantalate
  • Input/Output: 50Ohm
  • Low insertion attenuation

Narrowband filters

    • Usable bandwidth: 0.1 … 1.1MHz
    • Chip substrate: quartz
    • Input/Output: 50Ohm with matching
    • Excellent selectivity
    • Low insertion attenuation

    Resonators

    • Center freq. tol.: ±2 kHz; ±50kHz
    • Chip: quartz substrate
    • Insertion loss: < 1.5dB (typ.)
    • Resonators with frequency offset available upon request for TPMS Tx (e.g. 315.04MHz)
Kit 

Kit Brochure



Kit Components
Kit Component Products
 

  SAW Filters for Wireless AMI Metering, Center Frequency 315MHz up to 2.4GHz

Wideband Filters

  • Usable bandwidth (over temp.): 1 to 30MHz
  • Chip: Lithium tantalate substrate
  • Input/output: 50Ohm
  • Low insertion attenuation

Narrowband Filters

  • Usable bandwidth (over temp.): 0.1 to 0.6MHz
  • Chip: Quartz substrate
  • Input/output: 50Ohm with matching
  • Excellent selectivity
Kit

Kit Brochure







Kit Components
Kit Component Products
 

  SAW Filters and Resonators for Wireless Comfort Systems

Wideband Filters

  • Usable bandwidth (over temp.): 1 to 97MHz
  • AEC-Q200 Qualified Component Family
  • Input/output: 50Ohm
  • Low insertion attenuation

Narrowband Filters

  • Usable bandwidth (over temp.): 0.3 to 0.36MHz
  • AEC-Q200 Qualified Component Family
  • Input/output: 50Ohm with matching
  • Excellent selectivity

Resonators

  • Center freq. tol.: ±50kHz; ±150kHz
  • AEC-Q200 Qualified Component Family
  • Insertion loss: < 2.9dB (typ.)
  • Resonators with frequency offset available upon request for TPMS Tx (e.g. 315.04MHz)
Kit

Kit Brochure


 
Kit Components
Kit Component Products
 

Sensors



SMD PTC Thermistors for Limit Temperature Sensing Superior Series
  • Qualification based on AEC-Q200 rev. C
  • Suitable for reflow and wave soldering (up to 280°C)
  • Fast and reliable response
  • RoHS-compatible
  • UL approval to UL1434 pending
  • Lead-free tinned terminations
Kit

Kit Brochure


Kit Components
 Kit Component Products
 


 
SMD NTC Thermistors for Temperature Measurement and Compensation in Automotive Applications
  • As defined by IEC 60539, NTC (Negative Temperature Coefficient) thermistors are thermally sensitive semiconductor resistors which show a decrease in resistance as temperature increases
  • SMD NTCs are designed for temperature measurement and compensation
  • Qualification based on AEC-Q200, Rev. D
  • Operating temperature range: -40... +150°C
  • Available case sizes 0402, 0603 and 080
  •  Resistance values 4.7 up to 100kΩ
  • Different B values
  • Excellent long-term aging stability in high-temperature and high humidity environment
  • Nickel barrier termination and lead-free solderability
Kit

Kit Brochure


 

Kit Components
Kit Component Products
 


SMD NTC Thermistors General-Use Components for Temperature Measurement and Compensation
  • As defined by IEC 60539, NTC (Negative Temperature Coefficient) thermistors are thermally sensitive semiconductor resistors which show a decrease in resistance as temperature increases.
  • SMD NTCs are designed for temperature measurement and compensation.
  • Available case sizes 0402, 0603 and 0805 (1260 upon request)
  • Resistance values 1kΩ up to 680kΩ
  • Operating temperature range: -55... +125°C
  • Wide range of different B values
  • Excellent long-term aging stability in high-temperature environment
  • Nickel barrier termination and lead-free solderability
Kit

Kit Brochure




Kit Components
Kit Component Products
 


 
SMD NTC Thermistors for LED Applications
  • Highly accurate temperature sensing with low resistance tolerance down to ±1%
  • High temperature capability up to +125°C standard and +150°C automotive
  • Excellent long-term aging stability in high-temperature environments
  • Nickel barrier termination and lead-free solderability
  • Automotive product range AEC-Q200 qualified
  • Resistance values 10kV up to 470kV
  • Small EIA case sizes 0402 and 0603
  • PSpice library available
Kit

Kit Brochure 


Kit Components
Kit Component Products


SMD Inductors

b82432x002 simid 1812-c chip inductor SMD Inductors: SIMID 1812-C Chip B82432x002
  • Inductance: 1uH to 1000uH
  • Max DC Resistance: 32 Ohms
Kit

Kit Brochure
Kit Components
Kit Component Products


SMD Inductors: SIMID 0603-C, Series B82496
  • LR from 1.5 to 220nH
  • Tolerances ±0.3nH and ±5%
 
Kit

Kit Brochure

Kit Components
 Kit Component Products


SMD Inductors: SIMID 0805-F, Series B82498
  • LR from 2.7 to 820nH
  • Tolerances ±5% and ±10%
 
Kit

Kit Brochure

Kit Components
 Kit Component Products


SMD Inductors: SIMID 1210-100, Series B82422*100
  • LR from 0.015 to 100µH
  • Tolerance ±10%
 
Kit

Kit Brochure

Kit Components
Kit Components Kit Component Products
 


SMD Inductors: SIMID 1210-T, Series B82422T
  • LR from 0.015 to 100µH
  • Tolerance ±10%
 Kit

Kit Brochure

Kit Components
 Kit Component Products


SMD Inductors: SIMID 1812-T, Series B82432T
  • LR from 1.0 to 1000µH
  • Tolerance ±10%
Kit

Kit Brochure 
Kit Components
 Kit Component Products


SMD Inductors: SIMID 2220-A/H, Series B82442A, B82442H
  • LR from 1.0 to 1000µH
  • Tolerance ±10%
  • High-current type available
 
Kit

Kit Brochure

Kit Components
 Kit Component Products



SMD Inductors: SIMID 2220-T, Series B82442T
  • LR from 1.0 to 10000µH
  • Tolerances ±10% and ±20%
Kit

Kit Brochure

Kit Components
 Kit Component Products

SIMID 1210
SMT Inductors: SIMID 1210-H, Series B82422H
  • Temperature range: Up to +150°C
  • Very high current handling capability
  • Qualified to AEC-Q200

Inductors

Series Brochure



SMD Power Inductors



High-Power Inductors: HPI 13, Series B82559*A013
  • Operating temperature: -40 to +130°C
  • Flat wire winding: extremely low-resistance coil
  • Self-leaded construction features under body termination for smallest possible footprint
Kit

Kit Brochure

Kit Components
 Kit Component Products



High-Current Chokes: ERU25, Series B82559*A025
  • Operating temperature: -40 to +130°C
  • Flat wire winding: extremely low-resistance coil
  • Core: High saturation/ low-loss ferrite
Kit

Kit Brochure 

Kit Components
 Kit Component Products



SMT Power Inductors: Series B8247*A1, B8247*G1, B8247*G2, B8247*G4, B8247*G6
  • Temperature range up to +125ºC
  • High rated current
  • Low DC resistance

Inductors

Series Brochure 





  • EPCOS / TDK