Contact Mouser (USA)  (800) 346-6873     |     Feedback        
View Cart     |     Change Location  USD
United States United States

Please confirm your currency selection:

US Dollars
Home » NEWEST Products » New by Manufacturer » Analog Devices Inc. » ADN469xE M-LVDS Transceivers - Analog Devices
NEWEST Products
Analog Devices ADN469xE M-LVDS Transceivers
Analog Devices ADN469xE M-LVDS Transceivers

View Product List

Additional Resources

Analog Devices ADN469xE M-LVDS Transceivers

Analog Devices ADN469xE M-LVDS Transceivers feature the highest ESD protection of any multipoint LVDS transceivers. The ADI ADN469xE M-LVDS series includes eight transceivers, each of which is capable of connecting 32 data/clock nodes using a single differential cable pair at data rates of 100 Mbps or 200 Mbps. Traditional LVDS communication links, by comparison, must use 32 separate point-to-point nodes, which significantly increases power, connector size, cabling costs and total board space. ADI ADN469xE transceivers 8kV IEC ESD protection, offering up to 11 times the protection of competing M-LVDS transceivers. This higher level of protection improves the reliability of insertable/removable boards and cards used in wireless base station and networking infrastructure, data acquisition, automated test equipment, and other high-speed, highly networked backplane and cable applications.


ADN4691E/93E/96E/97E Features
  • Multipoint LVDS transceivers (low voltage differential signaling driver and receiver pairs)
  • Switching rate: 200 Mbps (100 MHz)
  • Supported bus loads: 30 Ω to 55 Ω
  • Choice of 2 receiver types
    • Type 1 (ADN4691E/ADN4693E): hysteresis of 25 mV
    • Type 2 (ADN4696E/ADN4697E): threshold offset of 100 mV for open-circuit and bus-idle fail-safe
  • Conforms to TIA/EIA-899 standard for M-LVDS
  • Glitch-free power-up/power-down on M-LVDS bus
  • Controlled transition times on driver output
  • Common-mode range: −1 V to +3.4 V, allowing communication with 2 V of ground noise
  • Driver outputs high-Z when disabled or powered off
  • Enhanced ESD protection on bus pins
    • ±15 kV HBM (human body model), air discharge
    • ±8 kV HBM (human body model), contact discharge
    • ±10 kV IEC 61000-4-2, air discharge
    • ±8 kV IEC 61000-4-2, contact discharge
  • Operating temperature range: −40°C to +85°C
ADN4690E/92E/94E/95E Features
  • Multipoint LVDS transceivers (low voltage differential signaling driver and receiver pairs)
  • Switching rate: 100 Mbps (50 MHz)
  • Supported bus loads: 30 Ω to 55 Ω
  • Choice of 2 receiver types
  • Type 1 (ADN4690E/ADN4692E): hysteresis of 25 mV
  • Type 2 (ADN4694E/ADN4695E): threshold offset of 100 mV for open-circuit and bus-idle fail-safe
  • Conforms to TIA/EIA-899 standard for M-LVDS
  • Glitch-free power-up/power-down on M-LVDS bus
  • Controlled transition times on driver output
  • Common-mode range: −1 V to +3.4 V, allowing communication with 2 V of ground noise
  • Driver outputs high-Z when disabled or powered off
  • Enhanced ESD protection on bus pins
    • ±15 kV HBM (human body model), air discharge
    • ±8 kV HBM (human body model), contact discharge
    • ±10 kV IEC 61000-4-2, air discharge
    • ±8 kV IEC 61000-4-2, contact discharge
  • Operating temperature range: −40°C to +85°C
Part Number Description Data Sheet Data Rate Supply Voltage - Max Supply Voltage - Min Package / Case Packaging Type
First Previous Next Last

Functional Block Diagram

Functional Block Diagram

Introduction to Multipoint LVDS and the ADN469xE Family

  • Analog Devices Inc.
  • Semiconductors|Integrated Circuits|IC-RF