Amphenol is a leading supplier of advanced interconnect systems for automotive safety devices and expanding onboard electronics in automobiles. These applications include entertainment, communication, navigation, and telematics modules, as well as engine control, sensors, actuators, and auxiliary motors. In addition, Amphenol has developed leading solutions for hybrid-electric vehicles and drive systems and is working with leading global customers to proliferate these advanced interconnect products into next-generation automobiles.
Amphenol Sine's A Series Automotive Connectors are designed as a high-performance solution for Heavy Equipment, Agricultural, Automotive, Military, Alternative Energy and other demanding interconnect architectures.
The AT Series™ connectors contain superior environmental seals, seal retention capabilities and feature Amphenol Sine Systems RockSolid™ Contact technology. In addition, all of our AT Series™ connectors have been developed to be completely compatible with all other existing standard products industry-wide. The connector design incorporates an integral latching system that ensures a definitive electrical and mechanical connection. Connector housings are manufactured with a thermoplastic material that is not only durable, but has excellent UV resistance, dielectric/mechanical properties and environmentally RoHS compliant. The sealing system is comprised of a front and rear silicone, multi-sealing, perimeter against environmental ingress. Contacts are derived from quality copper alloy to ensure an electrically-reliable connection. For applications demanding higher levels of performance, you can rely on our RockSolid™ contact technology.
Amphenol Sine Systems AHD Series™ Connectors were developed in response to the overwhelming need for an economic alternative to today's existing diagnostic product options. Designed specifically as a cost-conscious, reliable alternative, intermateable to industry standard 6 and 9 pin connectors, the AHD Series™ is ideal for any situation where either controlled and/or uncontrolled environmental conditions exist.
Amphenol Sine Systems AHD Series™ Connectors offer both a smooth, non-sealing option for controlled applications, as well as an environmentally-sealed, threaded option for more demanding applications. The same applies for DiagnosticGrade™ Cable Assemblies that provide both options for designers.
Amphenol Industrial's ePower line is designed for a variety of
applications including, but not limited to, power converters, hybrid
electric vehicles, heavy equipment electrification, two-and three-phase
motors and starter generators. Using innovative RADSOK® technology the
ePower series has a 40% smaller footprint, higher amperage, lower
T-rise, and less resistance when mating. One ePower 400A connector can
replace three conventional connectors, saving space and cost.
Amphenol Industrial's AT® Series Circular Connectors feature AT Contact Technology. These automotive connectors are designed to withstand the demanding conditions in which construction and farm equipment as well as trucks operate. The AT series molded thermoplastic receptacles have a positive reverse bayonet retention system and are sealed by redundant grommet wire sealing. The square flange design ensures a drop-in replacement to existing panel design and the jam nut design makes for easy installation. The 9 pin black receptacles are in accordance to the interface of the diagnostic connector of J1939/13.
- Jam nut and square flange mounting styles solution.
- Quick mating and unmating - reverse bayonet coupling
- Environmentally sealed - sealed against moisture and contaminants
- Contact retention system decreases installation costs and increases reliability
- RoHs compliant product
- Heavy-duty industrial connector, economical connector selection.
Operating Temperature Range: -55°C to +125°C
Durability (Mating Cycle): No electrical or mechanical defects after 100 cycles of engagement or disengagement
Corrosion Resistance: Connectors show no evidence of corrosion after exposure to 48 hours of salt spray per MIL STD 1344 method 1001
- Moisture Resistance: Water does not penetrate seals when submerged in 3 feet of water
- Fluid Resistance: Connectors show no damage when exposed to most fluids used in industrial applications
- Thermal Shock -40°/+125°C, 100 cycles, 1 hour per cycle
- Crimp Tensile Strength: 25 lbs
Electrical Specifications based on AT Machined
Dielectric Withstanding Voltage (Test Voltage): Current leakage less than 2 milliamps at 1500 VAC
- Current Rating at 125 degree C: 13 A
- Contact Millivolt Drop: 60 (AWG 16 Wire, 13 A)
- Insulation Resistance 1000 megaohms min. at 25°C
Receptacle Square Flange: Thermoplastic
- Grommet Seal: Neoprene Rubber for 3 and 5 pin; Silicone Rubber for 9 pin
- Contact (AT Series): Copper Alloy (Nickel and Gold plating available)