Molex, established in 1938, is one of the world's largest global manufacturers of interconnect products. Molex creates innovative product solutions for wire-to-wire, wire-to-board, and board-to-board connectors, including header, backplane, terminal, telecom, ethernet, and cable, as well as application tooling. Molex's efforts to minimize the environmental impacts of business activities, products, and services are reflected in their commitment to their environment management system, ECOCARE.
For more Molex products, visit Temp-Flex Cable, manufacturer of specialty wire & cable typically used in markets with extreme conditions and harsh environments.
For more Molex products, visit FCT Electronics, manufacturer of electrical connectors and associated products for the electronics industry.
Molex Ultra-Fit™ Power Connectors alleviates same-circuit-size cross mating and reduces terminal backout occurrences. The space saving, low mating force, high power Ultra-Fit power connector has a 11A current rating, 3.5mm pitch and is available with color keying options. A streamlined design up to 20% smaller over similar power connectors provides space savings and an ultra-low mating force reduces operator fatigue when mating numerous high-circuit connectors.
Molex Vertical SMT Modular Jacks with Kapton Tape for vacuum pick-and-place functionality can streamline high-volume PCB production and lower manufacturing costs. Automatic vacuum pick-and-place is the most common high-speed manufacturing process for precision placement of surface mount components on PCBs in mass production. The addition of Kapton tape to the surface of Molex Vertical SMT Modular Jacks facilitates automatic vacuum pick-and-place of the connector alongside other SMT components. This streamlines high-volume production and lowers manufacturing costs for customers. These Molex modular jacks are ideal for use in a variety of networking, commercial, consumer office, medical, and industrial applications.
Molex iPass+™ zHD Vertical Connectors operate at SAS-3 and Projected SAS-4 high-speed bandwidths. These low-profile Molex connectors drive next generation data rates and port densities, improving system airflow and signal integrity by eliminating mid-plane connections. Molex iPass+ zHD Connectors are 0.75mm pitch vertical connectors feature a robust and secure connection and are scalable up to 96Gbps data rates (24Gbps over four lanes). The vertical press-fit iPass+ zHD connector nearly doubles the number of ports on the PCB compared to conventional iPass connectors. One-step placement reduces cost and time associated with the wave solder process. These iPass+ zHD connectors mate to all current miniSAS HD (Molex iPass+ HD) passive copper, active copper, and optical cable assemblies. A positive locking latch ensures secure mating retention to cable assemblies. Available in multiple configurations (1-by-1, 1-by-2, 1-by-4), these versatile press-fit iPass+ zHD connectors accommodate a range of high density data and networking applications.
Molex IllumiMate™ 1.25mm Pitch Wire-to-Board Connector System is designed to meet the low-power needs of thin-screen LED TVs. Molex 1.25mm connectors offer more mating styles, voltage ratings, circuit sizes, and locking types than any similar connector system. These IllumiMate wire-to-board connectors offer straight and right-angle headers with friction and positive locks in various circuit sizes. The inner locks save space, protect wires from tangling, and latches from breaking. Fully shrouded headers with guiding features protect pins from damage and facilitate mating. Positive locks provide secure latching when needed, while friction locks on some versions provide additional mating stability. These 1.25mm connectors feature a dual-beam terminal design for secure electrical contact, front solder tabs for strong PCB retention, and polarizing ribs between circuits in the header that facilitate mating and protect contacts. Both vertical and right-angle headers accommodate vacuum pick-and-place equipment in RoHS-compliant and low halogen material to meet global environmental requirements.
Molex IllumiMate™ 1.00mm Pitch Wire-to-Board Connector System saves about 50% of space compared to IllumiMate 1.25 Connectors to meet the demands of thinner screen designs. Molex IllumiMate 1.00mm Connectors also offer lower voltage options than the IllumiMate 1.25 range to help achieve lower power consumption. IllumiMate 1.00mm Connectors feature positive and friction locks for secure latching, guide ribs to facilitate mating and prevent housing movement, front solder tabs for strong PCB retention, and a dual-contact terminal design for electrical contact assurance. The combination of small size and various circuit size and voltage options provide unique advantages and a single footprint design for any application that may include various models with different functionalities. These Molex wire-to-board connectors are ideal for use in a variety of markets and applications, including consumer electronics (LED TVs and mobile games), personal computers (desktop LED monitors, notebooks, and tablets), and medical (diagnostic and radiology equipment).
Molex MX150 CE™ Sealed Wire-to-Wire Interconnects are the most robust, rugged wire-sealed connector system. Designed for superior value, MX150 CE Sealed Connectors are ideal for light-vehicle applications not requiring USCAR specifications. Molex MX150 CE connectors are designed to operate reliably under harsh environmental and geological conditions where vast travel distances, rugged terrain, poor road conditions, and extreme weather temperatures are expected. The series is highly compact, featuring a 43.95mm mated interconnect length. These interconnects also feature individual wire seals, ensuring IP6K9K-level protection of the entire wired assembly from end-to-end. The series supports up to 12.0A current per blade, making it suitable for high- and low-current applications.
Molex EXTreme Ten60Power™ High-Current Connectors are hybrid power and signal devices that achieve up to 260.0A per linear inch and faster response times. EXTreme Ten60Power High-Current Connectors are designed for applications that require high current density and low power loss. Designed as a higher-current and lower profile power interconnect than existing connectors, Molex EXTreme Ten60Power provides maximum current-to-length ratio packaged in a low-profile, 10.00mm height housing that enhances system airflow within the power system. Both the plug and receptacle utilize reliable, proven Molex power and signal contact designs.
Molex SL™ (Stackable Linear) Modular Connectors lead the consumer electronics and automotive industries with the largest number of variations and cabling configurations. The SL series includes new surface mount headers for low-power and signal wire-to-board and wire-to-wire applications. The comprehensive SL Modular Connector System includes: press-fit compliant-pin, low-profile, latching vertical and right-angle headers; five stackable, low-profile housings for male or female crimp terminals; pre-assembled, single-piece pin and receptacle connector assemblies for IDT termination of discrete wire or ribbon cable and piercing crimp termination of FFC/FPC; single- and dual-row latching interim clips for stacking of sub-assemblies to form larger connectors; and panel mounts for modular wire-to-wire remote interconnections. SL products are capable of mating with select C-Grid® and KK® products. This product family is suitable for low-power signal applications such as computers, medical instruments, and automotive controls.
Molex 89762 Flexible Microwave Cable Assemblies deliver high performance with proven cable technology and connector termination expertise. These Molex high-performance, flexible microwave cable assemblies replace stiff and difficult-to-install semi-rigid assemblies.The flexible microwave cables are constructed from Temp-Flex® coaxial cables and Molex RF connectors and offer excellent electrical properties while minimizing Voltage Standing Wave Ration (VSWR) and insertion loss for the ideal cable and connector combination. Connector options include SMA, 2.92, SMP, SMPM, and others.
Molex Nano-SIM Card Sockets feature superior reliability for smartphones and tablet devices and are designed to mate seamlessly with standard Nano-SIM and specially-fitted micro-SIM cards. Molex Nano-SIM Card Sockets have a card socket shell with a 1.30mm profile height to enable use of the standard height (0.67mm) Nano-SIM cards as well as the thicker (0.76mm) specially-fitted micro-SIM cards. This card socket series is used with a 0.30mm block-style SIM connector (series 78545) to provide a high contact normal force (0.30N) that ensures card-to-socket contact integrity and electrical reliability. The 3-piece socket design with its separate block-style SIM connector and the ejector tray lowers the risk of SMT warpage, especially during high IR-processing temperatures. This compact set of components includes card polarization and detection as well as tray-locking features.
Molex MXP120™ Sealed Connector System is a high-performance 1.20mm terminal in-line connection system for automotive and commercial vehicles. The use of 1.20mm terminals minimizes the connector interface and connector package size compared with 1.50mm pitch connectors. These MXP120 series connectors are USCAR compliant and meet T3-V2-S2 performance levels for in-vehicle safety system applications. The contacts are rated at 13A and the housings are sealed to withstand high-pressure spray environments.
Molex Imperium™ High Voltage/High Current (HVHC) Connector System safely operates in extreme shock and vibration conditions found in the hybrid-electric and electrification commercial vehicle markets. Imperium HVHC Connector system is IP69 rated and delivers superior shielding and current density. It is available in 8.00 and 11.00mm diameter and is capable of handling an industry-leading 1000V and 250.0A per contact. An integrated MX150™ High-Voltage Interlock Loop crimp terminal (HVIL) eliminates high-voltage arcing during disconnects, ensuring the safety of operators and eliminating the need for an additional connector. This Molex connector system is fully sealed to IP69 while mated, ensuring safe operation from fluids in harsh environments.
Molex Lite-Trap connector system is similar to Molex’s Wire Trap connectors, and also to certain competitive “Poke-In” style versions. A stripped wire is inserted into the connector and pushes open a gate-style terminal that “traps” the wire. To unmate, a button-style lever on the housing top is pushed down to allow the wire to be disengaged. With a profile height of just 4.20mm, Molex’s Lite-Trap connectors offer the lowest profile available of similar wire-removable types. Other lower-profile versions are available in the market, but these are permanent one-time connection types that do not allow wire removal. Molex’s wire-removable Lite-Trap connector offers lower wire insertion force than similar types. It also offers a user-friendly latch that is easy for operators to engage and disengage, even without the use of a tool. These features combine to offer easy field assembly and removal if needed for trained or untrained operators. Other features of the Lite-Trap connector include a housing design that accepts more Molex insulation-length range than competitive designs. This provides more stable wire seating for electrical contact assurance. The dual-contact wire-trap clamp design provides further mating assurance.
Molex USB 3.0 (SuperSpeed) Type A Connectors provide reliable connectivity while meeting USB 3.0 High-Durability Class requirements of 5,000 mating cycles. These USB 3.0 connectors are halogen-free for environmental sustainability and support high, IR reflow temperatures of up to 255ºC while maintaining solder mount compatibility. These Molex connectors come in on-board style, top- or reverse-mount, upright, and vertical orientations. Dual-stacked versions are available for additional mating requirements. Also available are reverse, mid-mount style (or sink-type) receptacles with contact heights that range from 0.36 to 2.04mm for space-saving and low-profile height applications.
Molex zCD™ Interconnect System supports next-generation 400 Gbps Ethernet applications by transmitting 400 Gbps data rates (25 Gbps per-serial-lane) with excellent signal integrity (SI), electro magnetic interference (EMI) protection, and thermal cooling. Molex zCD connectors offer the densest, fastest interconnect on the market. These connectors are offered in two styles: style 1 (short body) for passive or active copper cables and style 2 (long body) for optics, such as active optical cables (AOCs) or pluggable transceivers. The zCD connectors feature a straight, back-route footprint with a 0.75mm pitch. An elastomeric gasket provides EMI containment and suppression. Designed to accept a broad range of thermal modules and heat sinks, the press-fit connector design ensures a robust and simple board termination. Molex zCD passive copper cable assemblies offer the densest 25 Gbps copper solution on the market when used with the zCD style 1 connector. The small and highly flexible assembly will use proven individual twinax and braid construction for short-reach 400 Gbps Ethernet (GbE) or legacy and proprietary applications. Molex zCD AOCs deliver 16-by-28 Gbps, or 400 Gbps of bandwidth, in a compact CDFP MSA standard interface. The zCD AOC design is based on singlemode silicon photonics technology and will transmit up to 4km for a fraction of the cost and power of long-reach optical modules. Primarily designed for 400 Gbps Ethernet applications, zCD AOCs will function with InfiniBand™ and proprietary protocol applications.
Molex zQuad Small Form-factor Pluggable Plus (zQSFP+TM)
interconnect solution is designed for high-density interconnect
applications and conforms to SFF-8665 QSFP28. Components of the system
include SMT connectors; and stacked integrated 2-by-1, 2-by-2 and 2-by-3
connectors and cages. Molex's zQSFP+TM SMT connector
supports new 100 Gbps Ethernet and 100 Gbps InfiniBand* (IB) Enhanced
Data Rate (EDR) applications. EDR applications consist of four lanes of
high-speed differential signals with individual data rates at 25 Gbps.
The preferential coupling design uses a narrow-edge coupled, blanked-
and formed-contact geometry and insert molding to optimize electrical
performance. The zQSFP+TM connector shares the same mating
interface as the QSFP+ form factor, making it backward compatible with
current connectors, cages and cable assemblies. zQSFP+TM EMI
cages are designed with an advanced heat-sink system to provide a high
level of heat dissipation for next-generation system-power levels.
Die-cast design features screw-down option to the PCB for maximum board
retention. The spring-finger design provides optimal EMI grounding and
allow for more space to route high-speed traces.
Molex DDR4 DIMM Sockets are designed for the latest generation of DDR/SDRAM in DIMM format. DDR4 products offer a 100% increase in speed, a 30% increase in density, and a 20% decrease in required voltage compared to other DDR/SDRAM offerings. These DIMM sockets support UDIMM, RDIMM, and LRDIMM memory applications over a wide range of high-speed data, computing, telecommunication, and networking servers with a data speed of 3.2 billion transfers per second. Molex DDR4 DIMM sockets have a vertical, through-hole (78726) or vertical, SMT (78730) design and feature 288 circuits, 30µm gold plating, and a reduced connector footprint of 6.50mm (max). Other hallmarks of Molex DDR4 sockets include high dimensional stability and excellent compatibility in Halogen-free and lead-free technologies.
Molex Optical EMI Shielding Adapters are designed to address
mechanical-design requirements limiting EMI and Radio Frequency
Interference (RFI) emissions from front panels or enclosures. The
adapters are constructed of either all die-cast housings or as a half
die-cast, half polymer housing. Housings have an EMI gasket that seals
the adapters to the panel. EMI adapters increase the shielding
effectiveness while enhancing the front panel aesthetics compared to
traditional plastic adapters. Molex’s extensive EMI shielding adapters
include LC, SC and MTP/MPO, which include Universal, Multi-Format and
Molex EdgeLine® Low-profile Connectors support up to 25 Gbps data rates and are available in multiple orientations and PCB thicknesses from 1.57mm to
3.18mm for use in high-speed transmissions and high-density signal
applications. The product line's one-piece solutions are cost effective
as they are only required when a peripheral interface or upgrade card is
populated. EdgeLine includes a customizable card-edge interface to
enable designers to specify first-mate, last-break designations as well
as shorter stubs for high-speed communications. The EdgeLine family
delivers a low-cost, flexible and scalable solution for low-to-mid range
telecom, computing and storage applications.
Molex Super Sabre™ is a high-current, power interconnect system designed for a wide range of applications requiring flexible configurations. Features include a flat blade terminal design with four points of electrical contact, fully isolated terminals on both mating sides, positive latch and TPA features (Terminal Position Assurance), silver-plated interface, and an optional UL1950 "Finger Test" certified blade. Super Sabre provides 30.0A per blade and 600V with a variety of power and power/signal options. The system's unique option of power and signal combinations enables designers to use a single connector housing to mate high-current and low current power (under 5.0A) while reducing size and cost of the total interconnect package. Super Sabre is well-suited for networking & telecommunications, appliances / white goods, automotive, power supplies for 100 to 600W units, and medical applications.
Molex Woodhead® MAX-LOC® Plus Shielded Cord-Grip Assemblies connect high-power electrical cables directly to an application via an exterior mounting enclosure, simplifying the installation process for high-volume, cost-sensitive programs. MAX-LOC® Plus Shielded Cord-Grip Assemblies bring multiple features found across numerous products into a single-product solution. This unique design results in cost and labor savings over conventional industry-standard products. The robust assemblies provide excellent EMI and RFI shielding plus sealing protection (liquids and dust).
Molex’s Impact™ Backplane Connector System provides data rates up
to and beyond 25 Gbps along with superior signal density of up to 30 pairs
per cm (80 differential pairs per inch). The broad-edge-coupled
transmission technology enables low cross talk and high signal bandwidth
while minimizing channel-performance variation across every
differential pair within the system. Impact™ 85 Ohm Plus leverages the
100 Ohm technology, density and footprint that offers an electrically
enhanced solution with the addition of a plus clip which improves common
mode performance. Impact™ Power is offered in 3- through 6-pair sizes
in conventional, coplanar and mezzanine configurations, with current
ratings from 60.0 to 120.0A per module. Designed for traditional
backplane and/or midplane architectures, the Impact™ Backplane Connector
System meets the growing demand for next-generation high-speed
Molex FAKRA II SMB connector system retains the high-performing,
cost-effective attributes as the original FAKRA connector series. The
enhanced features offered by the FAKRA II connector system demonstrate
Molex’s dedication to meet the continued mechanical and environmental
requirements of the automotive industry. The FAKRA II SMB product
offering meets both American USCAR and German FAKRA automotive
standards. Standard uses for FAKRA connectors are coaxial connections on
external antennas; such applications include SDARS, Cellular, GPS
key-less entry and satellite radio. The FAKRA connector provides a
key feature along with a visual color code to differentiate between
applications. Molex offers FAKRA connectors with a high-temperature
shroud that is fully compatible with lead-free reflow processes.
Molex's SMT FFC/FPC Connectors with Sn-Ag-Bi plating product range features miniature FFC/FPC SMT connectors designed to meet a wide variety of space and application-specific needs. The Sn-Ag-Bi plating reduces and/or prevents the production of tin whiskers to increase the reliability of the associated parts. These connectors offer compact depth, height and length measurements for applications with tight packaging requirements. The robust actuator design helps prevent damage caused by extensive
testing, cycling, or rough handling. Zero insertion force (ZIF)
and LIF options allow for repeat cycling with minimum wear. Available in a variety of fine-pitch options, Molex's Microminiature FFC/FPC lower-profile and higher-density features meet the downsizing needs of electronic equipment makers.
Molex HOZOX™ EMI Absorption Sheets and Tape achieves superior EMI noise mitigation through a unique layered design of magnetic and conductive/dielectric material. With a thickness of only 100 microns, the dual-layer structure gives a device manufacturer or electronics OEM the competitive advantage of mitigating radiated EMI noise in an ultra-broad spectrum. The magnetic layer's powder composite absorbs lower frequency electromagnetic energy, while the conductive layer's powder and high-loss dielectric resin absorb higher frequency electromagnetic energy. HOZOX™ may be applied to a wide variety of electronic products, including: telecommunication equipment; RF and microwave devices; consumer electronics; mobile devices; IT and medical equipment.
Now Available - Reflow Process Compatible (RPC) headers are now available in both signal and power applications and can handle solder temperatures up to 260ºC. Signal application KK 254 connectors delivers up to 5.0A and 250V per circuit in a 2.54mm centerline pitch. Power application KK 396 connectors deliver 13.0A and 600V per circuit in a 3.96mm centerline pitch.
Molex KK® Interconnection System offers many polarization features to ensure correct mating in an application. The KK® Interconnection System has offset header entry holes, which provide 180º polarization, allowing both power and signal to carry through the same housing, and can also be loaded with optional polarization keys and pegs, to help ensure that the headers and housings only mate one way. Customizable KK headers allow for more polarization options and design configurations, such as headers with voided pins, customized pin lengths, kinked PC tails, and varying tin or gold plating options, providing application design flexibility. The Molex KK® Interconnection System of "building block" connectors can create thousands of different configurations, allowing each user to build a system precisely suited for any application on centers from 2.50 to 5.08mm with a maximum current of 13.0A per circuit while handling up to 600V.
Molex Woodhead Super-Safeway Connectors product line features heavy-duty, industrial wiring devices designed for harsh conditions
and dependable performance in applications that require the unmatched durability that only rubberized industrial devices can deliver. Super-Safeway Connectors are the only rubberized industrial devices constructed using NEoTEX® Paracril OZO rubber. NEoTEX® Paracril OZO rubber provides ultimate performance within a wide temperature range around many oils, chemicals, and abrasive conditions.
Molex Micro IDT Coaxial Connectors feature ultra-thin wires that provide superior flexibility, better shielding, easier signal routing, and greater space savings in tight packaging applications than FFC/FPC connectors. Originally designed to run signaling through the hinge area of swivel-type cell phones with rotating LCDs, Molex's 0.40mm Micro IDT Coaxial connectors maneuver through twists and turns that FPCs cannot. The series IDT termination assembly method results in a 30% space savings versus hand-soldering, A double-clamp wire grounding method provides both electrical and mechanical grounding. This method offers a more reliable termination method than hand-soldering and up to 60% less transmission (dB) loss at frequencies between 1-3MHz. Molex's 0.40mm Micro IDT Coaxial Connectors are well-suited for mobile phones, digital cameras/camcorders, test connectors for high speed applications, notebook computers, PDAs, Mini DVD players, MP3 players, any application with a rotating LCD.
Molex VITA 66.1 Ruggedized Optical MT Backplane Connector System simplifies installation and maintenance of rugged embedded VPX MIL/AERO backplane applications. The patent-pending MT ferrule-carrier design enables field servicing without the use of hand tools. The design allows the system to blind-mate backplane applications requiring optically robust interfaces with simple accessibility and streamline MT assembly installation or regular maintenance. Compliant with ANSI-ratified VITA 66.1 specification for VPX
architecture, the system's MT termini are available in 8, 12 or 24 fibers in standard multimode and singlemode or VersaBeam™ (expanded beam MT). The system supports up to two floating MT ferrules (termini) to aid in proper mating of blind-mate applications. With its robust housing with heavy-duty anodized aluminum construction, ability to withstand extreme temperature ranges, and VITA 66.1 compliant footprint, the Molex VITA 66.1 Ruggedized Optical MT Backplane Connector System is ideal for rugged military and non-automotive commercial applications.
Molex's SpeedStack™ Mezzanine Connector System offers a high-density, low-profile solution that delivers data rates up to 40 Gbps per differential pair. Featuring mated stack heights 4.00 to 10.00mm with a 0.80mm pitch, the SpeedStack Mezzanine Connector System provides design flexibility for PCB space constrained applications. The low-profile 0.80mm pitch and narrow housing design minimize airflow obstructions and promote system cooling. The system's split-pad PCB design allows for electrical tuning performance to achieve data rates up 40 Gbps per differential pair and provides edgecard compatibility. SpeedStack's robust insert-molded wafer design with protected shrouded housing support the terminal location to improve electrical balance within the signals for low profile, high-density systems. In addition, a common grounding pin improves electrical performance and minimizes cross-talk. The Molex's SpeedStack™ Mezzanine Connector System is ideal for applications with limited PCB real estate including telecommunications, networking, military, medical, and consumer applications.