Contact Mouser (USA)  (800) 346-6873     |     Feedback        
View Cart     |     Change Location  USD
United States United States

Please confirm your currency selection:

US Dollars
NEDA Authorized LEDiL Distributor
LEDiL
   
View all LEDiL Products View LEDiL NEWESTPRODUCTS

LEDiL precision-engineered lenses and reflectors allow for rapid deployment of all types of light fixtures, including street lights, wall-wash, high-bay, sconces, emergency beacons, parking garage/low-bay, MR and AR downlights, and dock lights. With nearly 1000 standard products, LEDiL is a leading global specialist of optical components for semiconductors.

 
LEDiL Newest Products

LEDiL Product Line

LEDiL New Products

Added 02/2014 Ledil Angela and Angelina Reflectors Learn More
Added 12/2013 Ledil Strada-Module Series Lenses for Lumileds Learn More
Added 12/2013 Ledil Strada-SQ Series Lenses for Lumileds Learn More
Added 11/2012 Ledil Lisa2, Rita, & Lenina Series Reflectors for Cree Learn More
Added 11/2012 Ledil Leila Series Lenses for Cree Learn More
Added 10/2012 Ledil Mira Series Lenses for Cree Learn More
Added 10/2012 Ledil Lenses & Reflectors for OSRAM Oslon LEDs Learn More
Added 06/2012 Ledil Tina3-XM & Tina2 Series Lenses for Cree Learn More
Added 03/2012 Ledil Tina2-Jade Secondary Lenses for Avago Jade LEDs Learn More
Added 03/2012 Ledil Tyra & Tyra2 Series Reflectors for Cree MP-L LEDs Learn More
Added 03/2012 Ledil Minnie Series Reflectors for Cree MT-G Learn More
Added 03/2012 Ledil Strada & Julia Lenses for Luxeon Rebel-ES Learn More
Added 03/2012 Ledil Strada Series Lenses for Cree Learn More
Added 05/2011 Ledil Lenses for OSRAM OSLON SSL LEDs Learn More
Added 04/2011 Ledil Reflectors for Luminus SST50 and SST90 LEDs Learn More

LEDiL Featured Products

LEDiL Angela and Angelina Reflectors

LEDiL Angela and Angelina are two new families of reflectors for Zhaga-compliant solderless connectors. Optimized for performance, Angela and Angelina provide comprehensive support for the widest range of COB’s from more than ten manufacturers including Bridgelux, Citizen, Cree, Nichia, Osram, Philips Lumileds and Sharp. Common mechanical interface streamline R&D and manufacturing considerations. When developing 120 mm diameter ANGELA, specific attention was given to performance. This can be noted in the spot version which is optimized to provide a well defined beam pattern and centre beam candela power (CBCP). Smaller 85 mm diameter ANGELINA displays beam characteristics typical for downlights and general lighting.

Ledil Strada-Module Series Lenses for Lumileds

Ledil Strada-Module series lenses are designed for use with Lumileds LUXEON Q, R, and Rebel ES high power LEDs. The Strada-Module series lenses are 50 + 50mm(D) and 8.15mm(H) and can be easily fastened using screws, pins, and glue. The STRADA-2X2-T3 is an IESNA type III street light optic. The STRADA-2X2-ME is designed for European ME road lighting classes and various luminaires that use transparent flat covers. Combined with Lumileds LUXEON Q, R, and Rebel ES LEDs, the Ledil Strada-Module series lenses are ideal for applications including street lighting, urban areas, tunnels, offices, and covered parking.

Ledil Strada-SQ Series Lenses for Lumileds

Ledil Strada-SQ series lenses are designed for use with Lumileds LUXEON M high flux density and efficacy LEDs. The Strada-SQ series lenses are 25 x 25mm(D) and 8.7 mm(H) and can be easily fastened using screws, pins, and tape. When installing these lenses, Ledil recommends leaving a minimum center to center spacing between STRADA-SQ lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. Combined with Lumileds LUXEON M LEDs, the Ledil Strada-SQ series lenses are ideal for applications including downlights, lamps, indoor area lighting, and spotlights.

Ledil Lenses & Reflectors for OSRAM Oslon LEDs

Ledil Lenses & Reflectors for OSRAM Oslon LEDs were especially designed and optimized for Oslon Square PC, Oslon Square EC, Oslon SSL 80, and Oslon SSL 150 series of OSRAM Opto Semiconductors LEDs. These lenses and reflectors were carefully designed to make light distribution as uniform as possible. All of the lenses are made of optical grade PMMA material with high UV and temperature resistance, allowing for the use of high current and temperature conditions. The reflector is made of aluminium coated PC with a protective lacquer. These lenses and reflectors should be fastened to a PCB with an appropriate, Ledil-recommended adhesive.

Ledil Mira Series Lenses for Cree

Ledil Mira Series Lenses for Cree were especially designed and optimized for the XLamp® MT-G and XLamp CXA15 series of Cree LEDs. These lenses were carefully designed to make light distribution as uniform as possible. They are all clear round lenses, offering viewing angles of 28º, 38º, and 58º. They are made of optical grade PC material with high UV and temperature resistance, allowing for the use of high current and temperature conditions. The lenses should be fastened to a heat sink with a PU foam adhesive tape of automotive grade, or fastened with appropriate, Ledil-recommended adhesive.

Ledil Leila Series Lenses for Cree

Ledil Leila Series Lenses for Cree were especially designed and optimized for XLamp® XB-D and XLamp® XT-E series of Cree LEDs. These lenses were carefully designed to make light distribution as uniform as possible. They are made of optical grade PMMA material with high UV and temperature resistance, allowing for the use of high current and temperature conditions. The optic holders were also molded with high quality PC material. The lenses should be fastened to a heat sink with a PU foam adhesive tape of automotive grade, or fastened with appropriate, Ledil-recommended adhesive.

Ledil Lisa2, Rita, & Lenina Series Reflectors for Cree

Ledil Lisa2, Rita, & Lenina Series Reflectors for Cree were especially designed & optimized for XLamp® XP-E, XLamp XM-L, and XLamp CXA2011 series of Cree LEDs. They can also be used for Cree XLamp XP-G, XLamp XB-D, and XLamp XT-E LEDs. They have been carefully designed to make light distribution as uniform as possible. These reflectors are made of aluminium coated PC material with a protective lacquer, and the optic holders were also molded by high quality PC material. The reflectors should be fastened to a heat sink with a PU foam adhesive tape of automotive grade, or fastened to PCB with appropriate, Ledil-recommended glue adhesive.

Ledil Tina2-Jade Secondary Lenses for Avago Jade LEDs

Ledil Tina2-Jade Secondary Lenses for Avago Jade LEDs are especially designed and optimized for Avago's Jade series of LEDs. Special care was taken to make the light distribution of these lenses as uniform as possible. Ledil Tina2-Jade Secondary Lenses for Avago Jade LEDs are made of optical grade PMMA lens material with high UV and temperature resistance (105ºC/220ºF). The optic holders are molded from high quality PC material (120ºC/248ºF). These materials allow for the use of high current and temperature conditions. Tina2-Jade lenses should be fastened to the heat sink with a PU foam adhesive tape of automotive grade.

Ledil Strada & Julia Lenses for Luxeon Rebel-ES

Ledil Strada & Julia Lenses for Luxeon Rebel-ES are especially designed and optimized for Luxeon's Rebel-ES series of LEDs. These lenses were carefully designed to make light distribution as uniform as possible. Ledil Strada & Julia Lenses for Luxeon Rebel-ES are made of optical grade PMMA lens material with high UV and temperature resistance (105ºC / 220ºF), allowing for use in high current and temperature conditions. The Strada Lenses should be fastened to a heat sink with a PU foam adhesive tape of automotive grade, or fastened to PCB with appropriate, Ledil-recommended glue adhesive.

Ledil Strada Series Lenses for Cree

Ledil Strada Series Lenses for Cree are especially designed and optimized for Cree's XLamp® MX-6, XLamp® XP-G, XLamp® XM-L, and XLamp® XT-E series of LEDs. These lenses were carefully designed to make light distribution as uniform as possible. Ledil Strada Series Lenses for Cree are made of optical grade PMMA lens material with high UV and temperature resistance (105ºC / 220ºF), allowing for use in high current and temperature conditions. These lenses should be fastened to a heat sink with a PU foam adhesive tape of automotive grade, or fastened to PCB with appropriate, Ledil-recommended glue adhesive.

Ledil Minnie Series Reflectors for Cree MT-G

Ledil Minnie Series Reflectors for Cree MT-G are especially designed and optimized for Cree's XLamp® MT-G series of LEDs. These reflectors were carefully designed to make light distribution as uniform as possible. Ledil Minnie Series Reflectors for Cree MT-G are made of aluminum coated PC with a protective lacquer. The optional optic holders, included with CA12239_Minnie-M-MTG and CA12240_Minnie-WWW-MTG are also molded by high quality PC material. Minnie Reflectors without holders should be fastened to PCB with appropriate, Ledil-recommended glue adhesive. Minnie Reflectors with holders should be fastened to a heat sink with a PU foam adhesive tape of automotive grade.

Ledil Tyra & Tyra2 Series Reflectors for Cree MP-L LEDs

Ledil Tyra & Tyra2 Series Reflectors are especially designed and optimized for Cree's MP-L series of LEDs. Ledil Tyra & Tyra2 Series Reflectors for Cree MP-L LEDs were carefully designed to make light distribution as uniform as possible. The reflectors are made of aluminum-coated PC with a protective lacquer, and are available in three patterns, with two mounting options.

LEDiL Reflectors for Luminus SST50 and SST90 LEDs

The LEDiL Reflectors for Luminus SST50 and SST90 LEDs are specially designed to fit Luminus LEDs. The LEDiL Reflectors create a uniform white or warm white illumination, but work well with other colors, too. Made of metallized PC, high current and temperature conditions (120ºC/248ºF) are allowed. The LEDiL Reflectors for Luminus SST50 and SST90 LEDs are available in spot, medium, and wide angles.

LEDiL Lenses for OSRAM OSLON SSL LEDs

LEDiL Lenses for OSRAM OSLON SSL LEDs are available in a wide range of lens sizes and configurations to provide optical solutions with your OSRAM OSLON SSL LEDs. These secondary lenses are fastened with position pins, glue, adhesive tape, screws, snap pins, or a holder, the LEDiL Lenses for OSRAM OSLON SSL LEDs offer a range of 3-in-1, 3-up to 7-in-1, 7-up in multiple families.