|
|
|
|
Lineage Power 12A Non-Isolated Pico DLynx™
Analog and Digital DC-DC Power Modules
3Vdc-14.4Vdc input; 12A Output Current
The 12A Pico DLynx™ Non-Isolated DC-DC Power Modules from GE Energy (Formerly Lineage Power)are non-isolated DC-DC converters that deliver up to 12A of output current and operate over a wide input voltage range (VIN = 3Vdc-14.4Vdc). Available in both analog and digital configurations, GE Energy (Formerly Lineage Power)'s non-isolated power modules offer many features, including a digital interface using the PMBus protocol (the digital version), Tunable Loop™ to optimize dynamic output voltage response, remote On/Off, adjustable output voltage, output overcurrent (non-latching) and overtemperature protection, small size (12.2mmx12.2mmx8.5mm), wide operating temperature range (-40ºC to 85ºC), cost-efficient open-frame design, fixed switching frequency, and much more.
|
Additional Features/Benefits
- Compliance to RoHS EU Directive 2002/95/EC (Z versions)
- Compatibility in a Pb-free or SnPB reflow environment (Z versions)
- DOSA based
- Output voltage programmable from 0.6Vdc to 5.5Vdc via external resistor
- Power Good signal
- Ability to sink and source current
- ISO**9001 and ISO 14001 certified manufacturing facilities
Applications
- Distributed power architectures
- Intermediate bus voltage applications
- Telecommunications equipment
- Servers and storage applications
- Networking equipment
- Industrial equipment
|
Pico DLynx™ Analog Power Module
ELECTRICAL SPECIFICATIONS Datasheet
Part Numbers:
PVX012A0X43-SRZ
PVX012A0X3-SRZ
Parameter
| Device
| Symbol
| Min
| Typ | Max
| Unit | Operating Input Voltage
| All | VIN | 3
| ---
| 14.4 | Vdc | Adjustment Range
(selected by an external resistor)
(Some output voltages may not be possible
depending on the input voltage - see Feature
Descriptions on datasheet)
|
All |
Vo |
0.6 |
|
5.5 |
Vdc | Output Regulation (for Vo≥2.5Vdc)
- Line (VIN=VIN,min to VIN,max)
- Load (lo=lo,min to lo, max)
Output Regulation (for Vo<2.5Vdc)
- Line(VIN=VIN,min to VIN,max)
- Load (lo=lo,min to lo, max)
Temperature (Tref=TA,min to TA, max)
|
All
All
All
All
All
|
|
|
---
---
---
---
---
|
+0.4
10
5
10
0.4
|
%Vo,set
mV
mV
mV
%Vo,set
| Output Current (in either sink or source mode)
| All | lo | 0 |
| 12
| Adc |
CHARACTERISTIC CURVES
Typical characteristics for the 12A Analog Pico DLynx™ at 0.6Vo and 25ºC 
Pico DLynx™ Digital Power Module 
ELECTRICAL SPECIFICATIONS Datasheet
Part Numbers:
PDT012A0X3-SRZ
PDT012A0X43-SRZ Parameter
| Device
| Symbol
| Min
| Typ | Max
| Unit | Operating Input Voltage
| All | VIN | 3
| ---
| 14.4 | Vdc | Adjustment Range
(selected by an external resistor)
(Some output voltages may not be possible
depending on the input voltage - see Feature
Descriptions on datasheet)
|
All |
Vo |
0.6 |
|
5.5 |
Vdc | Output Regulation (for Vo≥2.5Vdc)
- Line (VIN=VIN,min to VIN,max)
- Load (lo=lo,min to lo, max)
Output Regulation (for Vo<2.5Vdc)
- Line(VIN=VIN,min to VIN,max)
- Load (lo=lo,min to lo, max)
Temperature (Tref=TA,min to TA, max)
|
All
All
All
All
All
|
|
|
---
---
---
---
---
|
+0.4
10mV
5
10
0.4
|
%Vo,set
%Vo,set
mV
mV
%Vo,set
| Output Current (in either sink or source mode)
| All | lo | 0 |
| 12
| Adc | Frequency Synchronization
| All |
|
|
|
|
| Synchronization Frequency Range
| All
|
| 510 |
| 720 | kHz |
CHARACTERISTIC CURVES Typical characteristics for the 12A Digital Pico DLynx™ at 0.6Vo and 25ºC 
| |
 |
|