United States United States
Please confirm your currency selection:


Product Finder

New Products
New Product Announcements
Subscription Center
Home » Product Knowledge Center » Bourns PortNote Solutions Design Kits

Bourns PortNote™ Solutions


Circuit Protection Design Kits are organized and focused on the protection of ports and their variations by application, rather than on product types. PortNote Kits are available for datacom, audio, video, and telecom solutions. Each kit contains enough Bourns product to build five of the PortNote Solution circuits. In addition, each Bourns PortNote Solutions Circuit Protection Design Kit provides a simple, single page guide with essential information to provide an effective solution known to work in most typical applications. Information provided includes objectives, part numbers, compliance, schematics, and much more.

Bourns PortNote™ Design Kit Selection Guide
Each kit contains enough Bourns product to build five PortNote Solution circuits

Datacom


Ethernet-ESD Protection
Ethernet interface ports house 2V digital signals operating on a 125 MHz clock and commonly require ESD protection in indoor, short-cable applications.


Kit: PN-DESIGNKIT1

Technical Document

Kit Contents
- CDSOT236-0504C 		Ethernet Power Contact & Surge Protection
Ethernet interfaces are digital signals operating on a 125MHz clock. This solution protects interface ports against surge and power contact threats.

NEW! Kit: PN-DESIGNKIT-23

Technical Document

Kit Contents
- PT61020L
- CDSOT236-0504C
- TBU-DT085-200-WH

Ethernet Power PoE
PoE interfaces combine two Vp-p differential signals and nominal 48 VDC power. This solution provides protection for both data and power signals.

Kit: PN-DESIGNKIT2

Technical Document

Kit Contents
- CDNBS08-PLC03-3.3
- CDNBS04-B08200
- SMBJ58A
- MF-SMDF050

USB3.0 ESD & OC Protection
Universal Serial Bus (USB) 3.0 ports provide up to 5Gbps data transfer rates and 5V power supporting currents up to 900mA. This solution provides protection against ESD, over current, and short circuits.

NEW! Kit: PN-DESIGNKIT-32

Technical Document

Kit Contents
- MF-NSMF200-2
- CDDFN10-0506N
USB 2.0 ESD & OC Protection
Hot-pluggable USB 2.0 ports provide up to 480 Mbps data transfer rates and typically require protection against ESD, short circuits and faulty equipment.

Kit: PN-DESIGNKIT3

Technical Document

Kit Contents
- MF-NSMF075-2
- CG0603MLC-05LE
SATA HDD Interface Data & Power Protection
SATA Hard Disk Drives are typically powered from a 5VDC power line that needs transient, in-rush, and reverse polarity protection. Data lines are susceptible to damage from ESD events when not connected.

NEW! Kit: PN-DESIGNKIT-28

Technical Document

Kit Contents
- MF-MSMF075/24-2
- SMBJ5.0A
- CDDFN10-0524P

RS-485 Serial port ESD/EFT/Surge Protection
RS-485 (TIA/EIA-485) is a balanced data transmission scheme that uses voltage levels from -7V to +12V Max. at data rates up to 10Mbps. This solution provides protection against ESD, EFT, power and surge faults.

NEW! Kit: PN-DESIGNKIT-22

Technical Document

Kit Contents
- TBU-CA065-300-WH
- MOV-10D201K
- CDSOT23-SM712
CAN-Bus Surge Protection
CAN is a message-based protocol serial bus for auto, industrial, & medical applications. This solution protects from high energy surges.

NEW! Kit: PN-DESIGNKIT-26

Technical Document

Kit Contents
- TBU-CA065-100-WH
- MOV-10D201K
- CDSOT23-T12LC
IEEE 1394B - Firewire/iLink Protection
IEEE 1394B is an 800Mb serial data port with 30V, 1.5A capability. This solution addresses short circuit and overvoltage challenges such as hot-swap, ESD, user abuse, and damaged cables.

NEW! Kit: PN-DESIGNKIT-25

Technical Document

Kit Contents
- MF-SM150/33-2
- CG0603MLU-05E


Audio/Video


HDMI 1.4 ESD & Overcurrent Protection
HDMI 1.4 is a hot-pluggable interface combining video, audio & Ethernet signals. This solution provides IEC 61000 Level 4 ESD protection without impairing the signal.

Kit: PN-DESIGNKIT-12

Technical Document

Kit Contents
- CG0402MLU-05G
- MF-FSMF020X-2
HDMI 1.3 ESD & Overcurrent Protection
HDMI 1.3 interfaces are 3.3V differential digital signals with BW up to 340MHz (10Gbps.) This solution provides IEC 61000 Level 4 ESD protection while preserving the signal. 

Kit: PN-DESIGNKIT-11

Technical Document

Kit Contents
- CDDFN10-0524P
- CDSOT236-0504LC
- MF-FSMF020X-2
HD-SDI / SDI Coaxial Port
High-speed ports, often needed in outdoor and high-exposure environments, require solutions providing lightening protection without impairing the HD-SDI signal up to 1.485GHz.

NEW! Kit: PN-DESIGNKIT-27

Technical Document

Kit Contents
- TBU-CA065-100-WH
- 2031-23T-SM-RPLF
- CDSOD323-T05LC

LVDS Input Port Surge Protection
Low-voltage differential signaling (LVDS) utilizes a 1.25V signal. This solution provides high level surge protection for a receiver, equalizer, or buffer input.

NEW! Kit: PN-DESIGNKIT-15

Technical Document

Kit Contents
- TBU-CA085-200-WH
- 2031-42T-SM-RPLF
- CDSOT23-S2004
LVDS Output Port Surge Protection
Low-voltage differential signaling (LVDS) utilizes a 1.25V signal. This solution provides high level output surge protection without impairing the LVDS signal up to 3GHz.

NEW! Kit: PN-DESIGNKIT-16

Technical Document

Kit Contents
- TBU-CA085-200-WH
- 2031-42T-SM-RPLF
- CDSOT23-S2004
Satellite Receiver RF Input Surge Protection
Near strikes can damage the delicate RF input port from a set top box to a satellite dish and to the power supply. This solution provides a low height, high-current solution to exposed applications.

NEW! Kit: PN-DESIGNKIT-24

Technical Document

Kit Contents
- 2035-09-SMLF
- SMLJ20A

VHF/UHF Coaxial Port ESD Protection
This solution is designed to protect RF ports under 12 Vp-p in the VHF and UHF (30 MHz - 3000 MHz) from ESD events without impairing VHF and UHF signals.

Kit: PN-DESIGNKIT-5

Technical Document

Kit Contents - CG0402MLU-12G
DisplayPort 1.2 ESD & Overcurrent Protection
DisplayPort is a royalty-free alternative to HDMI. This solution protects against ESD damage and short circuits associated with frequent plugging and unplugging.

NEW! Kit: PN-DESIGNKIT-31

Technical Document

Kit Contents
- CDDFN10-0524P
- CDSOT236-0504LC
- MF-PSMF075X-2


Telecom

RJ11 SLIC Neg. Battery Volt. Protection: GR-1089-CORE
This GR-1089-CORE Intra-building solution provides a high level of protection against surge and power contact threats within a small PCB area.

NEW! Kit: PN-DESIGNKIT-20

Technical Document

Kit Contents
- PL060-200-WH
- MOV-10D201K

RJ11 SLIC Neg. Battery Volt. Protection: ITU-T
This ITU-T solution provides a high level of protection against surge and power contact threats within a small PCB area.

NEW! Kit: PN-DESIGNKIT-21

Technical Document

Kit Contents
- TBU-PL085-200-WH
- MOV-10D391K

RJ11 SLIC ITU-T Dual Supply Voltage Protection
This solution protects dual supply voltage against surge and power threats for battery, ringing, and supervision between the codec and telephone handset.

Kit: PN-DESIGNKIT-6

Technical Document

Kit Contents
- TISP9110LDMR-S
- CMF-SDP35A-2

RJ11 SLIC GR-1089-CORE Dual Supply Voltage Protect
This solution protects dual supply voltage against surge and power contact threats for battery, dialtone, and ringing voltage.

Kit: PN-DESIGNKIT-7

Technical Document

Kit Contents
- TISP8200HDMR-S
- TISP8201HDMR-S
- B1250T

RJ11 Fax / Modem (FXO)
FXO (foreign exchange office) designates a telephone signaling interface that receives plain old telephone service (POTS). This solution protects those interfaces against surge and power contact threats.

Kit: PN-DESIGNKIT-8

Technical Document

Kit Contents
T1/E1 GR-1089-CORE Protection
T1/E1 ports communicate data over long cable distances. This solution provides protection against surge and power contact threats without impairing the signal.

NEW! Kit: PN-DESIGNKIT-17

Technical Document

Kit Contents
- TBU-DT085-200-WH
- 2020-42T-C4LFG
- B1250T

VDSL2 Line Side ITU-T Protection
This solution protects these high-speed input ports against surge and power contact threats without impairing the VDSL 30MHz signal.

NEW! Kit: PN-DESIGNKIT-18

Technical Document

Kit Contents
- TBU-CA050-500-WH
- 2031-15T-SM-RPLF
VDSL Over POTS Protection
This solution protects VDSL voice and data circuits, combined with Plain Old Telephone Service (POTS), against surge and power contact threats without impairing the VDSL 30MHz signal.

NEW! Kit: PN-DESIGNKIT-19

Technical Document

Kit Contents
- TBU-PL085-200-WH
- TBU-CA085-500-WH
- 2020-42T-C4LF
- B1250T
VDSL Driver Side Protection
VDSL provides fast data transmission, usually over a twisted pair of copper wires. This solution protects these ports against surge and power contact threats.

Kit: PN-DESIGNKIT-9

Technical Document

Kit Contents
- 2038-110-SMRPLF
- TISP4P015L1NR-S
- CD143A-SR70

ISDN Protection
ISDN transmits voice, video, and data over public switched telephone network circuits. This solution protects circuit interfaces against surge and power contact threats.

Kit: PN-DESIGNKIT-10

Technical Document

Kit Contents
- TISP4145M3BJR-S
- MF-RX018/250-0

Lighting and Batteries

LED PWM Dimmer -
PWM/ Power Protection
This solution provides ESD/EFT/surge and supplies overcurrent protection from potential faults during installation within rated limits.

NEW! Kit: PN-DESIGNKIT-29

Technical Document

Kit Contents
- MF-MSMF110/16-2
- CDSOT23-T12C

Li-ion Battery Controller Protection
This solution provides full protection to battery pack applications within rated limits.

NEW! Kit: PN-DESIGNKIT-30

Technical Document

Kit Contents
- MF-SVS210-0
- CG0603MLA-5.5ME







  • Bourns
  • Circuit Protection|Interconnects|USB