Hirose DF59 Series 2.0mm Pitch Connectors
Developed for LED applications, the Hirose DF59 Series 2.0mm Pitch Connectors feature an ultra low profile design which minimizes shadowing. The Hirose DF59 Series 2.0mm Pitch Connectors enable multiple wire-to-board, co-planar board-to-board bridge, and short-circuit pin connections to the PCB, minimizing the issue of thermal expansion. The floating board-to-board connector with "stress free contact" allows ± 0.5 mm floating function in XYZ directions. The DF59 Series features Hirose's positive "swing-lock" mechanism to provide strong plug retention against cable pull. Hirose's DF59 Series connectors are available in 2, 3, and 4 positions.
Hirose FX10 Series 10+ Gbps 0.5mm Pitch B2B Connectors - EXPANSION
Hirose has expanded the FX10 Series to include 10+ Gbps 0.5mm Pitch B2B Connectors. Hirose offers the 10+ Gbps 0.5mm Pitch B2B Connectors as an electrical interface for the OIF 100G Long-Haul DWDM Transmission Module (MSA-100GLH). These connectors provide
excellent signal integrity with a differential impedance
of 100 ± 10ohms at 30ps rise time (20% to 80%) and an insertion-loss-to-crosstalk ratio (ICR) with five-aggressor differential FEXT that meets the extrapolated IEEE 802.3ap specification for 10+ Gbps.
The Hirose FX10 Series B2B Connectors are 0.5mm pitch headers and receptacles with optional ground plates
on both sides of the header and receptacle to improve transmission
characteristics. Signal and ground are arranged in a ratio of 10:1 with
the ground plate SMT connected to the board. The ground stability
achieved serves to reduce noise. With a stacking height of either 4mm
or 5mm, the FX10 series comes in 80, 100, 120, and 140 contact positions. provides additional solder weld strength through metal fittings. Hirose's FX10 Series B2B Connectors without the grounding plate have been filled with additional signal contacts (96, 120, 144, and 158 contact positions). These board-to-board connectors feature
a rated current of 0.3A and a rated voltage of 50VAC. Ideal for
notebook computers, PDA, and other miniature electronic equipment.
View the entire FX10 Series
Hirose 3800 Series High Durability Interface Connectors
Hirose's 3800 Series board mounting cable connectors
provide high durability and a robust interface. The 3800 Series High
Durability Interface Connectors feature a small, lightweight robust
structure with a 0.35 mm thick metal shell covering the housing.
Designed with a unique contact structure, the 3800 Series offers a
simplified cable plug assembly with one-piece hood, 0.5mm sequence
range, clear tactile click to confirm a secure connection, and stable
contact resistance to 20,000 times mating/unmating.
Hirose DH Series 1mm Pitch Interface Connectors
Hirose introduced the DH Series as a line of shielded, impedance-controlled interface connectors for high-speed data transmission. Featuring small pitch sizes (0.5mm mounting pitch and 1mm contact mating pitch), the DH Series is a more compact, lower-profile, higher-density alternative to conventional half-pitch interface connectors. The Hirose DH Series 1mm Pitch Interface Connectors
offer a D-shaped interface design to resist wrenching forces,
through-hole style metal fittings to increase retention to the PCB, a
unique contact arrangement for IDC termination, excellent shielding for EMI prevention, and transmission rates up to 2.5 Gb/s when coupled with a high speed cable. Available with four different locking styles. The Hirose DH Series 1mm Pitch Interface Connectors are ideal for enterprise networking, industrial, telecom, and datacom applications requiring higher data speeds.
Hirose Electric FH41 & FH48 Series 0.5mm Pitch FFC/FPC Connectors
The
Hirose Electric FH41 & FH48 Series 0.5mm Pitch FFC/FPC Connectors support high-speed serial interface technology for picture transmission and next-generation chip V-by-One® HS by THine. The
FH41 and FH48 Series
feature an exclusive GND terminal design, impedance-matched shield
FFC ground contacts, and high-speed transmission rates using a
differential impedance of 100Ω±10% (3.75 Gbps max.). Highly reliable mechanical and
electrical connections are achieved using Hirose Electric's proven design features
including precise FFC/FPC positioning, flip-lock rotating actuator,
durable construction, and tactile
confirmation lock to assure a secure connection. The
FH41 & FH48 Series 0.5mm Pitch FFC/FPC Connectors are offered as right angle and vertical
connectors respectively with the FH48 Series utilizing the same
FFC as the horizontal FH41 Series connectors. RoHS compliant and
Halogen-free.
Hirose Electric FH40 0.5mm Pitch FPC Vertical Connectors
The Hirose Electric FH40 0.5mm Pitch FPC Vertical Connectors with a strong actuator construction and simple FPC insertion result in a 30% reduction in connection man-hours over conventional FPC connectors in earlier series. Designed to provide a reliable mechanical and electrical connection with FPC even in rough operating environments, these halogen-free, vertical connectors feature Hirose's innovative actuator form enabling the completion of both FPC insertion~ joint in the same motion, side catcher to ensure accurate FPC
insertion, proven "flip-lock" rotating actuator design with tactile
confirmation lock to assure a secure connection, and an unique terminal
form to retain the actuator. In addition, these connectors are
compatible with the standard 0.3mm thick FPC and have a 5.8mm
above the board height. These highly reliable and durable connectors
have a 0.5A DC current rating, 50 Vms AC, -40 to +85⁰C operating
temperature range, -10 to +50⁰C storage temperature range, 50 MΩ minimum
at 100V DC, no flashover or insulation breakdown at 150 Vrms AC / one
minute, 50 mΩ maximum with no damage, cracks, or parts discoloration for
20 cycles. Applications for the Hirose Electric FH40 0.5mm Pitch FPC Vertical Connectors
are car navigation, car audio, notebook PCs, DVD players, DVD
recorders, LCD, LCD TV, PDP, Digital TV, PPC, and peripheral equipment.
See All Hirose FPC Connectors
Hirose SMT Coaxial Connector: U.FL Series Plug - Expansion
Hirose Electric introduced the SMT plug to mate with the existing U.FL receptacles for board to board applications.
Hirose Electric offers an SMT Coaxial Connector, U.FL series, that is ultra small, lightweight, and low profile (1.9mm or 2.4mm mated height) with frequencies of up to 6GHz to meet the requirements of a wide variety of miniature equipment. The Hirose SMT Coaxial Connector features a user-friendly tactile lock for mating and a simple disconnect tool. Applications for the U.FL series are mobile phones, wireless LAN, Mini-PCI, Bluetooth, PDA, GPS, electronic measuring instruments, among others.
View entire series
Hirose DF57 Series 1.2mm Pitch Swing Lock W2B Connectors
Hirose constructed the DF57 Series 1.2mm Pitch Swing Lock Wire to Board Connectors with a low profile and a unique swing lock structure to provide highly reliable connections. The Hirose DF57 Series 1.2mm Pitch Swing Lock W2B Connectors feature a stacking height of 1.44mm for an effective mating height of 0.42mm, swing lock with both positive and friction locks for cable pull-force resistance, high lance structure, and integral molding to prevent solder wicking. These wire-to-board connectors have a rated voltage of 50V AC/DC and a rated current of 2.0A or 2.5A depending on the number of contacts. The Hirose DF57 Series 1.2mm Pitch W2B connectors are ideal for LED lighting, LCD TVs, LED modules, and other applications with small space constraints.
Hirose ZX360 Series Micro USB 3.0 Connectors
Hirose ZX360 Series Micro USB 3.0 Connectors are ideal for small handheld device applications such as medical and measuring equipment, MP3 players, notebooks, and much more. Fully backward compatible with micro USB 2.0, the ZX360 Series was designed with a data transmission speed up to 5Gbps, enabling seamless data transfer rates and and uncompressed transmission of High Definition movies and pictures. The structure of the connector is in two joined sections. The first section features a USB 2.0 interface to allow for a power charge connection and the other is the USB 3.0 for Superspeed transmission. Hirose has designed the ZX360 Series Micro USB 3.0 Connectors with an innovative plug that allows the cable to be soldered internally to a small PCB, instead of directly on to the contacts. This reduces the mechanical stress applied to the contacts. The durable, powerful ZX360 Series provides a current capacity increase to 900 mA and achieves 10,000 mating cycles.
Hirose ZX80 Series Micro-USB Type B Receptacles - EXPANSION
The Hirose ZX80 Series Micro-USB Connectors are now available with the new cradle-style Micro-B Receptacle. The unique lock construction ensures high durability while providing easy insertion/disconnection.
Hirose Electric designed the ZX80 Series Micro-USB Connectors to be 60% smaller than the standard Mini-B Connectors, and allow high-speed data transfer of 480Mbp. The highly durable Hirose Electric ZX80 Series Micro-USB Connectors
have a 1A current rating, operating temperature range of -30⁰C to 85⁰C,
10,000 mating cycles, UL94V, and comply with physical, electrical, and
environmental requirements of USB 2.0 standard. Applications for the ZX80 Series include mobile phones, PDA, portable music players, digital cameras, digital camcorders, and digital audio players.
View the entire ZX80 Series Micro-USB Connectors