HARTING har-port Service Port - EXPANSION
HARTING’s har-port Service Port offering has been expanded to include USB 3.0 couplers and pre-wired Cat6 rated RJ45 coupler cables designed for faster, simplified installation in the field.
HARTING introduced the har-port Service Port to the
HARKIS® family to meet the demand for simplified service port solutions
for today's common interfaces. Developed primarily for IP20 indoor
applications, the har-port Service Port provides a Cat. 6 interface up
to 10 Gigabit speeds and a very small service interface for Ethernet and
USB data connections. Constructed for ease-of-use, the IEC 60945-5 standard
panel cut out fitting can be easily assembled with one M22 nut. The
panel cut out design fits all typical industrial control or emergency
stop switches and control lamps. This makes the HARTING har-port Service
Port well-suited for medical devices, transportation controls, office
equipment, and any device where a service interface is needed to connect
flash drives, computers, keyboards, etc. Also available for the
har-port series are IP44 protection covers, sealing covers to prevent
unauthorized use, labels and label holders, as well as type A couplers.
View the entire har-port Service Port series
HARTING har-flex Cable Assemblies - EXPANSION
HARTING har-flex Connectors have been expanded to include
Cable Assemblies with 6, 12, 26, 32, and 50 positions and cable lengths of 0.1, 0.2, and 0.5 meters.
Based on a 1.27mm grid and offered in four different stack heights, the
HARTING har-flex Connectors with SMT technology enable designers to
bridge PCB distances between 8mm and 13.8mm in mezzanine applications.
Featuring high density contact spacing and pin count configurations
ranging from 6 to 100 pins in even numbered positions, the har-flex
Connectors maximize PCB real estate and achieve overall space savings
and cost efficiencies. The robust design includes solder hold downs to
ensure a reliable connection to the PCB and help absorb stress on the
solders contacts resulting from insertion and removal forces. The
HARTING har-flex Connectors provide 100 percent coplanarity testing and
standard fitting with pick and place pads that guarantee a simple, fully
automatic and assembly of the
PCBs.
View the HARTING har-flex Connectors
HARTING Han GND Heavy Duty Pluggable Ground Connectors
HARTING Han® GND Heavy Duty Pluggable Ground Connectors offer the first completely pluggable grounding solution for potential equalization. Han® GND features a single-pole, slim design with robust green and yellow plastic (polycarbonate) housings that meet international standards for identification of grounding wires in electrical applications. The module is designed for fine stranded wires from 6 AWG – 2 AWG (10 – 35mm²). Han-GND is independent from power contacts, which increases safety by
being able to completely ground connections prior to mating any power
connectors. IP 65 compliant, Han® GND Connectors are suitable for outdoor use, and rated for ambient temperatures ranging from -40°C to +125°C. Han® GND is available in available in both cable-to-cable and cable-to-panel connections with crimp or axial screw wire termination. The latter option allows for assembly of ground lines without special tooling enabling quick, simple, and reliable field connections. Extra connector mating security can be provided by the use of additional locking elements that prevent unintentional opening.
HARTING Han-Modular Connector System
HARTING Han-Modular® is a Heavy Duty Connector System designed to provide users with a very high degree of connectivity and manufacturing flexibility. Han-Modular Connectors can combine electrical, optical,
and gaseous signal and power connections in one easy assembly. Basic
modules snap into mounting frame and can be exchanged separately at any
time. Combinations of 1 to 12 modules are possible, depending on the
size of the hood and housing chosen. Han-Modular consists of more than 40 module types and can connect to currents from 5 A up to 200 A, voltages from 50 V to 5000 V, pneumatic tubes from 1.6 up to 6 mm ID, sensitive bus signals, and fibre optic signals in both POF and glass fibre cables.
HARTING har-flex Right Angle Connectors - EXPANSION
NEW! HARTING har-flex Connectors have been expanded to include right angle connectors with 6, 12, 16, 20, 26, 32, 40, 50, 68, 80, and 100 positions.
Based on a 1.27mm grid and offered in four different stack heights, the
HARTING har-flex Connectors with SMT technology
enable designers to bridge PCB distances between 8mm and 13.8mm in
mezzanine applications. Featuring high density contact spacing and pin
count configurations ranging from 6 to 100 pins in even numbered
positions, the har-flex Connectors maximize PCB real estate and
achieve overall space savings and cost efficiencies. The robust design
includes solder hold downs to ensure a reliable connection to the PCB
and help absorb stress on the solders contacts resulting from insertion
and removal forces. The HARTING har-flex Connectors
provide 100 percent coplanarity testing and standard fitting with pick
and place pads that guarantee a simple, fully automatic and assembly of
the
PCBs.
View all HARTING har-flex Connectors
HARTING Han-Fast® Lock PCB Connectors
HARTING Han-Fast® Lock Click-In PCB Connectors delivers rapid
user-friendly circuit board connection technology without any additional components or the need to solder. HARTING now makes it possible to connect currents
up to 60A to circuit boards with ease and flexibility. Offering
outstanding contact qualities, the Han-Fast® Lock allows a fast and
simple PCB connection in a space saving size. Needing only one contact point to make a connection, conductor lines are through-plated and given a drill hole and supporting point. Applications include Frequency Converters, Automation, Robotics, Transportation and Renewable Energy.
HARTING D-Subminiature Backshells
HARTING 's D-Sub Backshells are designed to guarantee a secure connection per DIN 41652 and enable continuous screening from the cable to the PCB via the connector. HARTING offers the D-Sub Backshells with 9-50 contacts, top and side entry angles, thermoplastic or metallized shells, and latching or locking options.
HARTING D-Sub Standard Connectors
HARTING's Subminiature D Connectors are standard interfaces for
data, signal and service/programmer applications in the automation and
audio/video industries. The extensive product range supports of all
Subminiature D interfaces, such as Control4, PROFIBUS, CanOpen and
DeviceNet. HARTING offers Standard D-Sub Connectors with 9 to 50
straight, right-angled or US footprint style contacts.
HARTING Han® EE Power Connectors
HARTING Han® EE Heavy Duty Power Connectors are designed to withstand the harsh demands of industrial environments. Han® EE Heavy Duty Power Connectors feature inserts with a rated voltage up to 500V at 16A, crimp contacts, and quick lock termination. The HAN EE Connector is available in male and female versions with 8 contacts, 16A current rating, 400V voltage rating and a wire gauge range of 20-14AWG. With its rugged performance, Han EE Heavy Duty Power Connectors are well-suited for robotics, semiconductors, transportation, industrial automation, and power utility applications.
HARTING har-bus® 2.00mm Pitch Hard Metric Connectors
HARTING har-bus® 2mm Pitch Hard Metric Connectors are designed to
IEC 61076-4-101 standards and form the basis for configuring
high-performing backplanes for control and industrial computer systems.
The har-bus Hard Metric Connectors are standardized for CompactPCI and
the VME64x bus. The modules are defined as the 5+2 row types A, B, AB
and C and the 8+2 row types D, E and DE. The male and female connectors
are available with press-in terminations. The female connectors are
offered for Pin in Hole Intrusive Reflow (PiHIR) technology as well.
HARTING DIN 41612 Power Connector Shell Housing Type C
HARTING's DIN 41612 Power Connectors product line includes types
C, D, E, and Har-Bus 64 with complementary types FM, 2F, H3, F9, and MH,
interface connectors I/U, and accessories such as housings and
hardware. HARTING's DIN 41612 Power Connector Shell Housing Type C is
designed for use with the DIN 4162 female connectors. The shell housing
is available with 48 contacts or 96 contacts and thermoplastic
construction. HARTING DIN Power Connectors are well-suited for power
supply and railway transportation applications.
HARTING DIN 41612 Signal Connector Type C
DIN 41612 Connectors are the standard for board-to-board and
cable-to-board connections in industrial automation and measurement
applications. HARTING's DIN 41612 Signal Connector offering is
designed to provide board-to-backplane or cable-to-board connections in
applications requiring a working current of up to 2A max. per contact.
The DIN 41612 Signal Connector is available in the Type C 64-position
female straight angle version.
HARTING har-bus 64® VME64x Connectors
HARTING introduced the har-bus® 64 VME 64x Connectors to meet the demand for faster processing speeds and data transmission rates. Designed as an extension of the DIN 41612 standard 3 row 96-way C type connectors, these VME-based connectors provide 2 additional rows and 160 contacts. HARTING har-bus® 64 VME 64x Connectors offer improved signal/ground ratio for reliable signal data transfer at rates up to 320 MByte/s, user-defined pins for test and maintenance bus lines, and voltage supplies for 3.3 V and 48 V system components. Fully forward and backward compatible, har-bus® 64 female connectors can mate with any combination of the 5 or the 3 row variants without any mechanical interference. This capability enables users to upgrade and maintain existing systems at lower costs. The design also allows for live insertion and plug-and-play functionality.
HARTING HARAX® M8 Circular / Ethernet Connectors
HARTING HARAX® M8 Circular / Ethernet Connectors feature HARAX
quick connection technology to provide gas and vibration-proof
connections by simply stripping the cable insulation, inserting the
conductors, and screwing the connector together. HARAX M8 Circular /
Ethernet Connectors are designed to provide IP65 / IP67 protection and
offer 2A-4A current with a 2V rated voltage. These connectors are
well-suited for sensors and Fast Ethernet applications. Available in the
4-pole, male straight angle version.
HARTING RJ Industrial® IP 20 Standard Patch Cable CAT 5e
HARTING offers the RJ Industrial® IP 20 Standard Patch Cables CAT 5e
as standard patch cables for Industrial Ethernet cabling systems in an
environment of limited mechanical stress. Developed to meet the
requirements of applications in control cabinets that need high-quality
with small, robust connectors, HARTING standard patch cables feature a
space saving design for multi-port switches and compact industrial
devices. The high-quality SF/UTP AWG 26/ 7 cables feature an over
moulded RJ45 design and a PUR chemical resistant cable jacket rated to
LSZH. RoHS compliant, HARTING's standard patch cables are deployable
for safe Gigabit Ethernet transmission and 100% electrical tested
@500VDC/min.
HARTING High Density D-Sub Connectors
HARTING High Density D-Sub Connectors with 15 to 78 straight and
right-angled contacts, exceed the contact capacity of the standard
Subminiature D connectors by 70%. The primary benefit of HARTING's D-Sub
High Density connectors is to provide a higher density of contacts
within the standard D-Sub shell pattern. A higher number of contacts
allows design engineers to enhance their equipment by including more
data paths with the same panel cut out. 15, 26, 44, 62 and 78 pin,
respectively, are designed in a 9, 15, 25, 37 and 50 pin standard D-Sub
size shell.
HARTING D-Sub SMT
HARTING's D-Sub SMT Connector series has been optimized for
reliable performance and a long service life. The SMT terminals'
coplanarity is a maximum of 0.1 mm, and the cast iron bases guarantee
perfect soldering. The black insulating housing simplifies camera
recognition, and the large, level surface is ideal for use with common
Pick-and-Place vacuum applications. An open terminal area makes it
possible to inspect the soldered connection and also improves heat
dissipation. The rectangular D-Sub SMT connectors from HARTING are
available in both standard and low-profile versions, with 9 to 37
contacts and a large selection of hardware in M3 or 4-40 UNC.
HARTING Filtered D-sub Connectors
HARTING Filtered D-sub Connectors provide high performance and
optimal filtering. The filtering element incorporates a multilayer
printed circuit board and surface mount components, all within the
standard D-sub shell. HARTING's Filtered D-sub product range consists of
both male and female connectors in various terminations such as solder
buckets, straight and right angled solder pins with 9, 15, 25 and 37
contact versions. The Filtered D-sub Connectors are suitable for
military, aerospace, industrial, medical, telecom and computers
applications.
HARTING Ha-VIS Smart Patch Cable IP 20 Cat 6
HARTING Ha-VIS Smart Patch Cable IP 20 Cat 6 is designed to
provide easy and fast illuminated detection of specific patch cables in
data center environments. The design includes an integrated LED on each
end of RJ45 Ethernet plug which can be illuminated by a detector. The
Smart Patch detection tool can identify the other end of the patch cable
up to 100 meters away. Based on a dual-boot design, the HARTING Ha-VIS
Smart Patch Cable IP 20 Cat 6 offers robust handling and bending
protection. In addition, the design is flame retardant, halogen-free,
and GHMT certified. Suitable for Gigabit Ethernet 1000 Mbit/s with
transmission performance in acc. with Cat. 6 ISO/IEC 11 801, Ha-VIS
Smart Patch Cables are well-suited for data centers, routers,
servers/switches, and patch panels.
HARTING har-flex Connectors
HARTING har-flex Connectors are based on a 1.27mm grid and
offered in four different stack heights. The HARTING har-flex Connectors
with SMT technology enable designers to bridge PCB distances between
8mm and 13.8mm in mezzanine applications. Featuring high density contact
spacing and pin count configurations ranging from 6 to 100 pins in even
numbered positions, the har-flex Connectors maximize PCB real estate
and achieve overall space savings and cost efficiencies. The robust
design includes solder hold downs to ensure a reliable connection to the
PCB and help absorb stress on the solders contacts resulting from
insertion and removal forces. The HARTING har-flex Connectors provide
100 percent coplanarity testing and standard fitting with pick and place
pads that guarantee a simple, fully automatic and assembly of the
PCBs. Now Available! HARTING har-flex Right Angle Connectors with 6, 12, 16, 20, 26, 32, 40, 50, 68, 80, and 100 positions.
NEW! HARTING har-flex Connectors have been expanded to include Cable Assemblies with 6, 12, 26, 32, and 50 positions and cable lengths of 0.1, 0.2, and 0.5 meters.
View har-flex Cable Assemblies
NEW! HARTING har-flex Connectors have been expanded to include Cable Assemblies with 6, 12, 26, 32, and 50 positions and cable lengths of 0.1, 0.2, and 0.5 meters.
View har-flex Cable Assemblies
HARTING Han-Eco® Modular Hoods and Housings
HARTING introduced the Han-Eco® Modular Hoods and Housings as a corrosion-resistant, lightweight alternative to the metal hoods and housings used in tough industrial environments. Han-Eco Hoods and Housings are constructed using a high-performance Polyamide engineered to provide high resistance to environmental stress and meet the demanding flammability requirements of UL94 Class V 0. Featuring snap together assembly using widely available modules from the Han-Modular® series, Han-Eco® series eliminates the need for tools during assembly, maximizes flexibility, and saves wiring space and time. When locked, these connectors offer IP65 protection as defined for DIN EN 60 529. With its high mechanical stability and excellent resistance to environmental influences, these connectors are well-suited for industrial applications that require multiple connections such as offshore wind plants, conveyer systems, packaging machines, and modular applications that do not require more expensive metal housings. HARTING Han-Eco Modular Hoods and Housings are available in sizes 6 B, 10 B, 16 B and 24 B with integrated cable glands.
HARTING Han-Yellock® 60 Series Hoods and Housings - EXPANSION
HARTING has expanded the Han-Yellock® Connector System to include the 60 Series Hoods and Housings.
HARTING introduced the Han-Yellock® Connector System, a new product series which retains the core functionality of the respected Han® connector line and offers significant differences in size and shape to improve functionality. HARTING 's Han-Yellock® Connector System interface
consists of a housing, bulkhead mounting on the housing side and a
carrier hood with cover on the cable side. The system can be used with a
variety of insulators and contact inserts in order to establish an
interface. Han-Yellock modules require only male crimp contacts.
View Han-Yellock® Connectors
HARTING har-port Service Port
HARTING introduced the har-port Service Port to the HARKIS® family to meet the demand for simplified service port solutions for today's common interfaces. Developed primarily for IP20 indoor applications, the har-port Service Port provides a Cat. 6 interface up to 10 Gigabit speeds and a very small service interface for Ethernet and USB data connections. Constructed for ease-of-use, the IEC 60945-5 standard panel cut out fitting can be easily assembled with one M22 nut. The panel cut out design fits all typical industrial control or emergency stop switches and control lamps. This makes the HARTING har-port Service Port well-suited for medical devices, transportation controls, office equipment, and any device where a service interface is needed to connect flash drives, computers, keyboards, etc. Also available for the har-port series are IP44 protection covers, sealing covers to prevent unauthorized use, labels and label holders, as well as type A couplers.
NEW! HARTING’s har-port Service Port offering has been expanded to include
USB 3.0 couplers and pre-wired Cat6 rated RJ45 coupler cables designed
for faster, simplified installation in the field.
View the expanded offering
HARTING har-speed M12 Connectors
HARTING based the har-speed M12 series on a 4-pair connector face
with paired shielding to meet the stringent requirements of Cat. 6A for
1/10Gbit data rates and transfer class EA. The har-speed M12 Connectors
feature paired shielding of contacts for minimal interaction and
perfect shielding. Maximum data rates are achieved through the
configuration of the contacts in conformance with Ethernet technology.
Overload versions in different lengths are also available. Rated for IP
65/67, the HARTING har-speed M12 Connectors are well-suited for
applications with high bandwidths where rapid and safe data transmission
beyond Cat. 5 are required such as vision systems, factory automation,
transportation, broadcast systems, and security and control cameras.
HARTING HAN® 3A Right Angled Housings and Covers
HARTING offers the HAN-INOX® 3A Right Angled Housing and Covers
as a line of stainless steel housings suitable for a wide range of
industrial environments where weatherproofing is a concern. HARTING designed the 3A Right Angled Housings and Covers with
304 stainless steel construction to provide resistance to harsh
detergents and corrosion-resistant stainless locking elements. With an IP 65/67 environmental rating to assure reliable performance for wash-down applications, the HARTING HAN-INOX® 3A Right Angled Housing and Covers
are well suited for electrical applications in the Food and Beverage,
Water and Sewage Treatment, Pharmaceutical, Chemical , Offshore and
Shipping, and Mining industries.
HARTING HAN® HC 250 High Current Crimp Connectors
HARTING designed the HAN® HC 250 High Current Connectors to meet the transportation industry's demand for increased interconnection flexibility and reliability in drive systems with high acceleration levels. The HAN HC 250 High Current Connectors from HARTING feature
modular construction for greater design flexibility using up to four poles of varied connector sizes of 35 mm2, 50 mm2 and 70 mm2 within the compact space of the existing HAN 24 HPR housing. The HAN HC 250 High Current Connectors have a rated current of 250A,
voltage of 2000 V, and crimp termination for vibration resistance.
These high current connectors are ideally suited for power supplies,
hybrid vehicles, battery systems, and railway applications.
HARTING RJ Industrial 10G Cat. 6 Components
HARTING RJ Industrial® 10G Cat.6 Component Series completes the
product line for the 1 / 10 Gigabit Ethernet with RJ45 interface. The RJ
Industrial® 10G Cat.6 Component Series features future-proof RJ45
connection technology based on category 6 / transmission class EA.
Design features include robust, full-metal coupler construction,
ready-to-use panel feed through design to reduce assembly time, 360°
shielding, 360° EMC for industrial environments, and HARTING Industrial
Form Factor (HIFF) dimensions for proper fit to PushPull, Han® 3 A and
HAN-Modular® product lines. HARTING's RJ Industrial® 10G Cat.6 Component
Series is ideally suited for factory automation, broadcast, machinery,
communications, and industrial network devices.