HARTING develops, manufactures and sells electrical and electronic connectors, device terminations, backplanes, network components as well as cable harnesses for networks or machinery, or for power and data application in factories. HARTING products are used in mechanical and plant engineering, broadcast and entertainment, factory automation, power generation and distribution as well as industrial electronics and telecommunication.
HARTING Ha-VIS eCon 2000 and 3000 Ethernet Switches are unmanaged Plug-and-Play Ethernet Switches available in slim (eCon 3000 series) and flat (eCon 2000 series) metal housings. Ha-VIS eCon 2000 and 3000 switches are available with variants including PoE or PoE+ functionality that increase performance in modules and reduce the overall number of components used in control cabinets and in the field. Ha-VIS eCon Ethernet Switches are designed with up to 10 Fast Ethernet and with up to 7 Full Gigabit ports and allow for cost-efficient and quick expansion and/or reconstruction of network infrastructures. Thanks to an extremely flat design, Ha-VIS eCon 2000 Ethernet Switches are ideal for installations where space is restricted towards the cable connection at the front. The offering includes various combinations of variants with RJ45, SFP slots and fibre optic ports. Automatic detection of the transmission rate (auto-negotiation) and of the wiring of the twisted pair data cable (autopolarity and auto-MDI(X)) allow for simple plug & play. The variants are available with a temperature ranges from -40ºC to +70ºC for industrial and 0ºC to +55ºC for commercial use.
HARTING Han® Q 3/0 and Han® Q 4/0 expands the portfolio of the smallest Han 3A size range. An area measuring 42 mm² is enough room for 3 power contacts and the protective earth contact (Han Q 3/0) or 4 power contacts (Han Q 4/0). This makes them both the most powerful in the compact industrial connector class. Both connectors are used in industrial environments. They are ideally suited to the needs of the semi-conductor industry. The Han Q 3/0 with protective earth contact is designed for 3-phase earthed networks and is used in three-phase motors. It can fit all housings in the 3A size, i.e. all plastic and metal varieties, EMC and also the extremely robust HPR and stainless steel housings. The Han Q 4/0 comes with 4 power contacts and is used to enable equipment such as ventilators, fans or extraction units to be connected. Because these consumers are very common in the semi-conductor industry, the Han Q 4/0 is the ideal solution to reduce costs because two of the consumers can be connected with one connector. The connector is also ideally suited for DC applications. However, in this case, it can only be used in 3A size plastic housings.
HARTING Han® HMC Connector Series is the first to combine the properties of more than 10,000 mating cycles and protection against harsh environmental conditions in one complete connector. The increasing modularization in machine construction and automation is leading to a rising demand for connectors that have been developed for a large number of mating cycles. The Han HMC housings are equipped with a durable locking reel in order to continue to provide the connector with IP65 protection against dust and water after more than 10,000 locking cycles. In order to be able to offer more than 10,000 mating cycles, Han HMC connector inserts contain high performance grounding contacts. The crimp contacts are equipped with a special HMC gold surface and constant spring force. These special properties guarantee the complete connector's flawless function.
HARTING har-flexicon® is tailored to market demands for
screw-less rapid termination technology and economical processing for
electronic assemblies. The trend towards more and more compact devices
is encountered in all markets and applications. This trend is leading to
increasing miniaturization of PCB connectors and greater contact
density, while still retaining the familiar ease of use and proven
robustness. The har-flexicon range offers customers swift and
convenient single strand wiring in a 1.27mm pitch that features superior
stability, a fully automatic equipping process and an especially low
overall height of only 5mm. All products have been designed for SMT and
SMC reflow soldering processes as well as for automatic loading using
established pick-and-place processes.
HARTING Ha-VIS RFID Reader and components are designed for harsh industrial applications. These HARTING RFID components are deployed in the transportation,
machinery, and energy markets and guarantee secure and reliable
information processing under the most challenging environmental
conditions. The entire range of necessary products for this RFID system is available from one source. These Ha-VIS RFID components carry robust IP64+ ratings and allow users to benefit from the simultaneous identification of up to several hundred objects without the need for the direct line of sight required by barcode solutions. The collected data are immediately ready for further processing. A transponder can be used to store information directly on the product at the same time it is identified. This means the data are always available wherever a product is located.
HARTING’s har-port Service Port offering has been expanded to include USB 3.0 couplers and pre-wired Cat6 rated RJ45 coupler cables designed for faster, simplified installation in the field.
HARTING introduced the har-port Service Port to the
HARKIS® family to meet the demand for simplified service port solutions
for today's common interfaces. Developed primarily for IP20 indoor
applications, the har-port Service Port provides a Cat. 6 interface up
to 10 Gigabit speeds and a very small service interface for Ethernet and
USB data connections. Constructed for ease-of-use, the IEC 60945-5 standard
panel cut out fitting can be easily assembled with one M22 nut. The
panel cut out design fits all typical industrial control or emergency
stop switches and control lamps. This makes the HARTING har-port Service
Port well-suited for medical devices, transportation controls, office
equipment, and any device where a service interface is needed to connect
flash drives, computers, keyboards, etc. Also available for the
har-port series are IP44 protection covers, sealing covers to prevent
unauthorized use, labels and label holders, as well as type A couplers.
View the entire har-port Service Port series
HARTING har-flex Connectors have been expanded to include
Cable Assemblies with 6, 12, 26, 32, and 50 positions and cable lengths of 0.1, 0.2, and 0.5 meters.
Based on a 1.27mm grid and offered in four different stack heights, the
HARTING har-flex Connectors with SMT technology enable designers to
bridge PCB distances between 8mm and 13.8mm in mezzanine applications.
Featuring high density contact spacing and pin count configurations
ranging from 6 to 100 pins in even numbered positions, the har-flex
Connectors maximize PCB real estate and achieve overall space savings
and cost efficiencies. The robust design includes solder hold downs to
ensure a reliable connection to the PCB and help absorb stress on the
solders contacts resulting from insertion and removal forces. The
HARTING har-flex Connectors provide 100 percent coplanarity testing and
standard fitting with pick and place pads that guarantee a simple, fully
automatic and assembly of the
View the HARTING har-flex Connectors
HARTING Han® GND Heavy Duty Pluggable Ground Connectors offer the first completely pluggable grounding solution for potential equalization. Han® GND features a single-pole, slim design with robust green and yellow plastic (polycarbonate) housings that meet international standards for identification of grounding wires in electrical applications. The module is designed for fine stranded wires from 6 AWG - 2 AWG (10 - 35mm²). Han-GND is independent from power contacts, which increases safety by
being able to completely ground connections prior to mating any power
connectors. IP 65 compliant, Han® GND Connectors are suitable for outdoor use, and rated for ambient temperatures ranging from -40°C to +125°C. Han® GND is available in both cable-to-cable and cable-to-panel connections with crimp or axial screw wire termination. The latter option allows for assembly of ground lines without special tooling enabling quick, simple, and reliable field connections. Extra connector mating security can be provided by the use of additional locking elements that prevent unintentional opening.
HARTING Han-Modular® is a Heavy Duty Connector System designed to provide users with a very high degree of connectivity and manufacturing ﬂexibility. Han-Modular Connectors can combine electrical, optical,
and gaseous signal and power connections in one easy assembly. Basic
modules snap into mounting frame and can be exchanged separately at any
time. Combinations of 1 to 12 modules are possible, depending on the
size of the hood and housing chosen. Han-Modular consists of more than 40 module types and can connect to currents from 5 A up to 200 A, voltages from 50 V to 5000 V, pneumatic tubes from 1.6 up to 6 mm ID, sensitive bus signals, and ﬁbre optic signals in both POF and glass ﬁbre cables.
NEW! HARTING har-flex Connectors have been expanded to include right angle connectors with 6, 12, 16, 20, 26, 32, 40, 50, 68, 80, and 100 positions.
Based on a 1.27mm grid and offered in four different stack heights, the
HARTING har-flex Connectors with SMT technology
enable designers to bridge PCB distances between 8mm and 13.8mm in
mezzanine applications. Featuring high density contact spacing and pin
count configurations ranging from 6 to 100 pins in even numbered
positions, the har-flex Connectors maximize PCB real estate and
achieve overall space savings and cost efficiencies. The robust design
includes solder hold downs to ensure a reliable connection to the PCB
and help absorb stress on the solders contacts resulting from insertion
and removal forces. The HARTING har-flex Connectors
provide 100 percent coplanarity testing and standard fitting with pick
and place pads that guarantee a simple, fully automatic and assembly of
View all HARTING har-flex Connectors
HARTING Han-Fast® Lock Click-In PCB Connectors delivers rapid
user-friendly circuit board connection technology without any additional components or the need to solder. HARTING now makes it possible to connect currents
up to 60A to circuit boards with ease and flexibility. Offering
outstanding contact qualities, the Han-Fast® Lock allows a fast and
simple PCB connection in a space saving size. Needing only one contact point to make a connection, conductor lines are through-plated and given a drill hole and supporting point. Applications include Frequency Converters, Automation, Robotics, Transportation and Renewable Energy.
HARTING Filtered D-sub Connectors provide high performance and
optimal filtering. The filtering element incorporates a multilayer
printed circuit board and surface mount components, all within the
standard D-sub shell. HARTING's Filtered D-sub product range consists of
both male and female connectors in various terminations such as solder
buckets, straight and right angled solder pins with 9, 15, 25 and 37
contact versions. The Filtered D-sub Connectors are suitable for
military, aerospace, industrial, medical, telecom and computers