Fluke CNX 3000 Wireless Test Tools
Fluke CNX 3000 Wireless Test Tools provide measurements that are remote, simultaneous, and recordable. With the CNX 3000 Wireless Multimeter, the meter measurements plus readings from up to 3 wireless modules are displayed simultaneously and remotely on a single screen. The measurements can be taken as far as 20 meters away. Up to 10 modules can be viewed in real time on a PC with a PC adapter. Up to 65,000 sets of min/max/avg readings captured over single to multiple logging sessions can be recorded. The CNX Wireless Test Tools meet category 1000 V CAT III and category IV 600 V safety standards.
Fluke VT02 Visual IR Thermometer
Fluke VT02 Visual IR Thermometer combines the convenience of a spot thermometer with the visual advantage of a thermal imager. Using hyper-thin pyroelectric technology, VT02 is a troubleshooting camera, perfect for situations that do not warrant a high-resolution thermal imager, while a single spot temperature reading is not enough. Issues can easily be detected and captured using VT02's point and shoot focus free design. Every image capture is saved as a blended infrared and visual image so that readings taken on different dates can be compared. Hot and cold spot markers are available in visual, infrared, and blended views.
Traditional infrared thermometers show an average temperature of an area; VT02 Visual Thermometer gives a visual image of exactly what you are measuring. With Smarview® Software, you can communicate issues that have been detected or document repairs made.
Fluke Laser Distance Meters
Fluke Laser Distance Meters provide instant measurements up to 330 feet (100 meters) with simple one-button point and shoot operation. With up to ±1 mm accuracy, the meters feature area and volume calculations, addition and subtraction of measurements, min/max function, and pythagoras calculation. Certain models also offer tripod mode, stake out function, storage of last twenty measurements, and an inclination sensor for leveling, height tracking and measuring in hard-to-reach areas.
Fluke 320 Series True-rms Clamp Meters
Fluke 320 Series True-rms Clamp Meters are designed for harsh environment use in commercial, light industrial, HVAC, and residential applications. These meters have a slim ergonomic design and a smaller jaw. The 320 series measures up to 400A ac current and 600V ac and dc voltage. The 324 and 325 models also measure temperature and capacitance. The 325 model makes both AC and DC measurements, as well as frequency and min/max.
Fluke 805 Vibration Meter
Fluke 805 Vibration Meter is a reliable accurate solution for checking bearings and overall vibration. The instrument takes overall vibration measurements (10 HZ to 1,000 Hz) for acceleration, velocity, and displacement units of measurements for a wide variety of machines. Direct sensor tip measurements between 4,000 Hz and 20,000 Hz for bearing assessments are made using Crest Factor+ technology. The innovative sensor design minimizes measurement variations caused by device angle or contact pressure. A four-level severity scale assesses urgency of problems. Data can be exported via USB and trended in Microsoft Excel with built-in templates.
Fluke 62 MAX Infrared Thermometers
Fluke 62 MAX Infrared Thermometers are small, lightweight, and rugged. These devices are IP54 rated for dust and water resistance and have been drop tested to 3 meters (9.8 feet). They feature precise laser technology for more accurate and repeatable measurements. The 62 MAX+ model has dual rotating lasers. A large backlit display screen shows minimum, maximum, or average temperature, or the the difference between two measurements.
Fluke TP175 TwistGuard™ Test Probes
Test probes are now available with Fluke's TwistGuard technology. The TP175 Test Probes work with all of Fluke's modular test leads.
Learn more.
Fluke introduced the TL175 TwistGuard™ Test Leads as the world's first test leads with a manually adjustable test tip guard for use in different measurement environments. Designed using patented TwistGuard™ technology, the exposed probe tip length can be adjusted from 19mm to 4mm (0.75 inch to 0.16 inch) by simply twisting the test lead. The TL175 Test Leads are safety rated for CAT III 1000 V and CAT IV 600 V with the tip guard fully extended, and safety rated for CAT II 1000 V when the tip guard is retracted. Constructed to last longer than similar models and tested to withstand over 30,000 bends without failure, the Fluke TL175 TwistGuard Test Leads feature WearGuard™ insulation, extra-heavy strain relief on both probe-end and plug-end, and the WearGuard™ indicator to provide a visual cue when the test leads are in need of replacement. Extremely versatile, the TL175 Test Leads are compatible with any instrument that accepts 4 mm shrouded banana plugs.
View both TP175 TwistGuard Test Probes and TL175 TwistGuard Test Leads.
Fluke TL175 TwistGuard Test Leads
Fluke introduced the TL175 TwistGuard™ Test Leads as the
world's first test leads with a manually adjustable test tip guard for
use in different measurement environments. Designed using patented TwistGuard™
technology, the exposed probe tip length can be adjusted from 19mm to
4mm (0.75 inch to 0.16 inch) by simply twisting the test lead. The TL175 Test Leads are safety rated for CAT III 1000 V and CAT IV 600 V when the tip guard fully extended, and safety rated for CAT II 1000 V when
the tip guard is retracted. Constructed to last longer than similar
models and tested to withstand over 30,000 bends without failure, the Fluke TL175 TwistGuard Test Leads feature WearGuard™ insulation, extra-heavy strain relief on both probe-end and plug-end, and the WearGuard™ indicator to provide a visual cue when the test leads are in need of replacement. Extremely versatile, the TL175 Test Leads are compatible with any instrument that accepts 4 mm shrouded banana plugs.
Fluke 190 Series II Scopemeter®
Fluke introduced the 190 Series II Scopemeter® as the market's first four- and two-channel 1000 V CAT III / 600 V CAT IV rated portable oscilloscopes. Designed to provide unmatched performance in rugged field environments, the Fluke 190 Series II Scopemeter® offers up to 2.5 GS/s high-speed data sampling with as much as 400 pico seconds resolution, Connect-and-View™ triggering, Kensington® lock security slot, TrendPlot™ paperless recorder mode with deep memory, and ScopeRecord™ roll mode to capture or plot waveforms and measurements over extended time spans. IP-51 rated to withstand harsh operating environments, the Fluke 190 Series II Scopemeter® is ideally suited for industrial machinery, automation & process controls, power conversion electronics, and secondary applications in medical imaging, avionics, and defense communications.
Fluke i2500-18 and i2500-10 iFlex Flexible Current Probes
The new Fluke i2500-18 and i2500-10 iFlex™ flexible current probes expand the measurement range of select Fluke meters to 2500 A ac while providing extreme measurement flexibility. Fluke's iFlex™ flexible current probes connect directly to the meter, displaying current measurements without error-prone scaling factors. These probes also feature a 1.8 m (6 ft.) cable that separates the meter and measurement location for easier reading of the display, a 7.5 mm coil diameter for easy measurement in tight spaces, ergonomic design for simple one-hand handling, three-year warranty, and CAT IV 600 V, CAT III 1000 V safety ratings.
Fluke 381 Series Remote Display AC/DC Clamp Meter with iFlex Probe
The new Fluke 381 Series Remote Display True-rms AC/DC Clamp Meter with iFlex™ has all the functions of a clamp meter, but also allows the removal of the display for added flexibility. Wireless technology allows the display to be carried up to 30 ft. away from the point of measurement without interference with measurement accuracy. The first of its class to offer a detachable, remote display for easier, faster, and safer measurements, Fluke's 381 Series Remote Display True-rms AC/DC Clamp Meter offers up to 1000 A ac and dc current measurement, 1000 V ac and dc voltage measurement, and includes the iFlex™ flexible current probe that expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access. The 381 Series also has CAT IV 600V, CAT III 1000 V safety ratings;integrated low pass filter;and state-of-the-art signal processing for noisy electrical environments.
Fluke 376 Series True-rms AC/DC Clamp Meter with iFlex Probe
The new Fluke 376 Clamp Meter with iFlex™ offers true-rms ac voltage and current measurements with the ability to read up to 1000 V and 1000 A in both ac and dc modes. Additionally, Fluke's 376 Clamp Meter includes the new iFlex™ flexible current probe that expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure around awkward sized conductors and improved wire access. The Fluke 376 Clamp Meter replaces the 337 series. Other features and benefits include a CAT IV 600 V, CAT III 1000 V safety rating, integrated low pass filter, and state-of-the-art signal processing that allows for use in noisy electrical environments while providing stable readings.
Fluke 374 and 375 Series True-rms AC/DC Clamp Meters
The new Fluke 374 and 375 True-rms AC/DC Clamp Meters offer improved performance perfect for many current measurement situations. With true-rms ac voltage and current measurements, the Fluke 374 and 375 can read up to 600 V and 600 A in both ac and dc modes. Also, both are compatible with the new iFlex™ flexible current probe which expands the measurement range to 2500 A ac, provides increased display flexibility, has the ability to measure around awkward sized conductors, and has improved wire access. The 374 and 375 Clamp Meters offer CAT IV 600 V, CAT III 1000 V safety rating; an integrated low pass filter (Fluke 375 only); and state-of-the-art signal processing that allows for use in noisy electrical environments while providing stable readings.
Fluke 373 Series True-rms AC Clamp Meter
The new Fluke 373 AC Clamp Meter offers improved performance perfect for many AC-only current measurement situations. Fluke's 373 Series AC Clamp Meter provides true-rms ac voltage and current for accurate measurement on non-linear signals and offers resistance measurement to 6000Ω with continuity detection and 1000 µF capacitance measurement. Other key features and benefits of 373 Series Clamp Meters are state-of-the-art signal processing for use in noisy electrical environments; large, easy-to-read backlight display that automatically sets the correct measurement range; CAT IV 300 V, CAT III 600 V safety rating; 3-year warranty; and soft carrying case.